8F1I01.BA2B.0000-1

General information

Workspace length for shuttle movement	0.450642056 m
Certifications
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
UL	cULus E225616 Power conversion equipment

Power connection

Power supply	Power supply only in conjunction with 80PS080X3.10-01 and 8F1OA.01B.0000-1 or 8B0C0320Hx00.B00-1
Input voltage	Max. 58 VDC
Input current	Max. 31 A
Power dissipation	Max. 30 W
Derating depending on installation elevation	In preparation
Switching frequency	40 kHz
DC bus capacitance	0.95 mF ±20%
Max. line length	30 m between 2 stations

DC bus connection

Protective measures
Overload protection	No
Short-circuit and ground fault protection	No

Fieldbus

Type	POWERLINK V2 controlled node (CN)
Variant	2x M12 x-cod shielded, 1x M12 a-cod shielded, 3-port hub
Max. line length	30 m
Transfer rate	100 Mbit/s

Enable inputs

Quantity	1
Circuit	Sink
Electrical isolation
Input - ACOPOStrak	Yes
Input voltage
Nominal	24 VDC
Maximum	30 VDC
Input current at nominal voltage	Approx. 5 mA
Switching threshold
Low	<5 V
High	Typ. 15 V Max. 19 V
Switching delay at nominal input voltage
Enable 1 → 0, PWM off	42 ms
Enable 0 → 1, ready for PWM	3 ms typ.
Modulation compared to ground potential	Max. ±38 V
OSSD signal connections	0.5 ms
Max. line length	30 m between 2 stations

Support

Motion system
mapp Motion	V5.12.3 or higher

Operating conditions

Mounting orientation
Any	Yes
Installation elevation above sea level
Nominal	0 to 500 m
Maximum	4000 m
Degree of protection per EN 60529	IP65
Degree of protection per UL 50	Type 12

Ambient conditions

Temperature
Operation
Nominal	5 to 40°C
Storage	-25 to 55°C
Transport	-25 to 70°C
Relative humidity
Operation	5 to 85%, non-condensing
Storage	5 to 95%, non-condensing
Transport	Max. 95% at 40°C

Mechanical properties

Dimensions
Width	446 mm
Height	85.5 mm
Depth	132 mm
Weight	9.6 kg

Numero materiale:

8F1I01.BA2B.0000-1

Descrizione:

ACOPOStrak curved segment B, suitable for diverters

accessori opzionali

Closure caps

8F1X0A.00001000K-1	30x blind plug caps for connectors X1A/X1B on ACOPOStrak 8F1I segments or X3A/X3B on ACOPOSmotor Compact 8D1

Display cables

8F1CU0001.313U0-0	ACOPOStrak display cable, length 1 m, 1x male USB connector, 1x 12-pin M12 male connector, A-coded, straight
8F1CU0002.313U0-0	ACOPOStrak display cable, length 2 m, 1x male USB connector, 1x 12-pin M12 male connector, A-coded, straight

Display modules

8EAD0000.000-1	Display module, LCD, 128 x 64, black/white, 1x USB 3.0

ISC - ISC cables

8F1CI00X5.31110-0	ACOPOStrak ISC cable, length 0.5 m, 2x 8-pin male X-coded straight M12 connector
8F1CI00X8.31110-0	ACOPOStrak ISC cable, length 0.8 m, 2x 8-pin male X-coded straight M12 connector

ISC - PLK cables

8F1CB0001.31110-0	ACOPOStrak ISC+PLK cable, length 1 m, 2x 8-pin male X-coded straight M12 connector
8F1CB0002.31110-0	ACOPOStrak ISC+PLK cable, length 2 m, 2x 8-pin male X-coded straight M12 connector
8F1CB00X5.31110-0	ACOPOStrak ISC+PLK cable, length 0.5 m, 2x 8-pin male X-coded straight M12 connector
8F1CB00X8.31110-0	ACOPOStrak ISC+PLK cable, length 0.8 m, 2x 8-pin male X-coded straight M12 connector

PLK - RJ45 cables

8F1CD0005.11390-0	ACOPOStrak PLK cable, length 5 m, 1x 12-pin male A-coded straight M12 connector, 1x 8-pin straight RJ45 connector, can be used in cable drag chains
8F1CD0010.11390-0	ACOPOStrak PLK cable, length 10 m, 1x 12-pin male A-coded straight M12 connector, 1x 8-pin straight RJ45 connector, can be used in cable drag chains
8F1CD0015.11390-0	ACOPOStrak PLK cable, length 15 m, 1x 12-pin male A-coded straight M12 connector, 1x 8-pin straight RJ45 connector, can be used in cable drag chains
8F1CD0020.11390-0	ACOPOStrak PLK cable, length 20 m, 1x 12-pin male A-coded straight M12 connector, 1x 8-pin straight RJ45 connector, can be used in cable drag chains

Power cables

8F1CP0002.11110-0	ACOPOStrak power cable, length 2 m, 1x 8-pin female straight hybrid connector, 1x 8-pin male straight hybrid connector, can be used in cable drag chains
8F1CP0X38.11110-0	ACOPOStrak power cable, length 0.38 m, 1x 8-pin female straight hybrid connector, 1x 8-pin male straight hybrid connector, can be used in cable drag chains

Supply cables

8F1CP0005.1112A-0	ACOPOStrak power supply cable, length 5 m, 2x 6 mm² + 1x (2x 0.34 mm²), 1x 8-pin female straight hybrid connector, can be used in cable drag chains
8F1CP0010.1112A-0	ACOPOStrak power supply cable, length 10 m, 2x 6 mm² + 1x (2x 0.34 mm²), 1x 8-pin female straight hybrid connector, can be used in cable drag chains
8F1CP0015.1112A-0	ACOPOStrak power supply cable, length 15 m, 2x 6 mm² + 1x (2x 0.34 mm²), 1x 8-pin female straight hybrid connector, can be used in cable drag chains
8F1CP0020.1112A-0	ACOPOStrak power supply cable, length 20 m, 2x 6 mm² + 1x (2x 0.34 mm²), 1x 8-pin female straight hybrid connector, can be used in cable drag chains

Threaded Caps

X67AC0M12	X67 M12 threaded caps, 50 pcs.

Aggiornamenti HW di Automation Studio	Versione (data)	Download
V4.7 HW Upgrade (8F1I01.BA2B.xxxx-1)		EXE / 234 KB Login per il download
V6.0 HW Upgrade (8F1I01.BA2B.xxxx-1)		EXE / 541 KB Login per il download

Certificati	Versione (data)	Download
EU Declaration Transport Systems ACOPOStrak		PDF / 180 KB Login per il download
TÜV-certificate - function "Safe Pulse Disabling" for ACOPOStrak		ZIP / 411 KB Login per il download

Documentazione	Versione (data)	Download
ACOPOStrak User´s manual		PDF / 133 MB Login per il download
Datasheet 8F1I01.BA2B.0000-1		PDF / 7 MB Login per il download

E-CAD (Electro o EPLAN Template)	Versione (data)	Download
ACOPOStrak EPLAN P8 from V2.4		EXE / 6 MB Login per il download

Informazioni generali	Versione (data)	Download
E225616 UL Certificate of Compliance ACOPOStrak		PDF / 541 KB Login per il download

M-CAD (Mechan. Template)	Versione (data)	Download
ACOPOStrak Curved segment B STEP file		STP / 4 MB Login per il download