General information
Controller
| Processor | netX 500 |
| Dual-port memory | 64 kB |
Fieldbus
| Type | Ethernet |
| Variant | 2x RJ45, Cat 5 |
| Line length | Max. 100 m |
| Transfer rate | 10/100 Mbit/s |
| Cyclic data | Max. 2048 bytes (IOCR) |
| Acyclic data | Read/Write record, max. 1024 bytes/telegram |
| Functions |
Context management via CLRPC DCP Process and diagnostic alarm 1 submodule Diagnostics, max. 200 bytes/telegram Max. 244 modules Target/Actual comparison of the configuration VLAN and priority tagging |
Electrical properties
| Nominal voltage | +3.3 V ±5% |
| Nominal current | 650 mA |
Ambient conditions
| Temperature | |
| Operation | 0 to 55°C |
Mechanical properties
| Dimensions | |
| Width | 120 mm |
| Height | 73.2 mm |
| Depth | 18.5 mm |
| Slot | Standard PCI half-size module, plug and play |
| Installation in | |
| B&R Automation PC | Yes |
| B&R Panel PC | Yes |
| Desktop PC | Yes |
Numero materiale:
5ACPCI.XPNS-00Descrizione:
The 5ACPCI.XPNS-00 is equipped with 2 Ethernet interfaces and can therefore be integrated as a master into a PROFINET network. Data is exchanged via the dual-ported memory.
| Aggiornamenti HW di Automation Studio | Versione (data) | Download |
|---|---|---|
| V3.0 HW Upgrade (5ACPCI.XPNS-00) | EXE / 819 KB | |
| V4.0 HW Upgrade (5ACPCI.XPNS-00) | EXE / 1 MB |
| Documentazione | Versione (data) | Download |
|---|---|---|
| B&R Hilscher Fieldbus cards | PDF / 3 MB | |
| Datasheet 5ACPCI.XPNS-00 | PDF / 562 KB |
| E-CAD (Electro o EPLAN Template) | Versione (data) | Download |
|---|---|---|
| APC EPLAN P8 from V2.4 | EXE / 99 MB |
| File di descrizione delle apparecchiature Fieldbus | Versione (data) | Download |
|---|---|---|
| 5ACPCI.XPNS-00 GSDML package | ZIP / 15 KB |
| Firmware Upgrade | Versione (data) | Download |
|---|---|---|
| Hilscher firmware (5ACPCI.XPNS-00) | ZIP / 409 KB |