5MP7150.101E-000

General information

Support
mapp View	Recommended widget class: A (see also section "Software-specific information")
Certifications
CE	Yes
CRA (Cyber Resilience Act)	Evaluation ongoing
UL	cULus E115267 Industrial control equipment
KC	Yes

Controller

Processor
Type	ARM Cortex-A9 i.MX6
Clock frequency	1000 MHz
Flash	4 GB
Standard memory
RAM	1 GB DDR3

Display

Type	TFT color
Diagonal	10.1"
Colors	16.7 million
Resolution	WXGA, 1280 x 800 px
Contrast	800:1
Viewing angles
Horizontal	Direction R = 85° / Direction L = 85°
Vertical	Direction U = 85° / Direction D = 85°
Backlight
Brightness	400 cd/m²
Half-brightness time	100,000 h
Touch screen
Technology	Analog, resistive

Interfaces

USB
Quantity	1
Type	USB 2.0
Variant	Type A
Transfer rate	Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s)
Current-carrying capacity	Max. 500 mA
Ethernet
Quantity	1
Variant	RJ45, shielded
Transfer rate	10/100 Mbit/s
Max. baud rate	100 Mbit/s

Keys

System keys	22 numeric keys, cursor block
Stop button	Yes (2 normally closed contacts)
Enable switch	Yes (3-position button, right position)
Key switch	Yes
LEDs	5

Operating system

Edition	mapp View and VNC client
Architecture	ARM
Language	English
Preinstallation	Yes

Electrical properties

Nominal voltage	24 VDC ±25% (integrated reverse polarity protection), SELV
Inrush current	Max. 5.6 A (current limiting available)
Power consumption	12 W (500 mA at 24 VDC), max. 15 W (with USB load)
Max. interruption of power supply	≤10 ms

Operating conditions

Drop height	1 m to industrial floor
Flame-retardant	UL 94 / V-0
Degree of protection per EN 60529	IP65
Protection class	Class 3 per EN 61131-2 and EN 50178

Ambient conditions

Temperature
Operation	0 to 45°C
Storage	-25 to 70°C
Transport	-25 to 70°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Vibration
Operation	5 to 8.4 Hz: 3.5 mm amplitude / 8.4 to 150 Hz: 1 g
Shock
Operation	15 g, 11 ms
Elevation
Operation	Max. 2000 m

Mechanical properties

Housing
Material	ABS
Front
Panel overlay
Material	Polyester
Dimensions
Width	353 mm
Height	274 mm
Depth	109.5 mm (with stop button)
Weight	Approx. 2000 g

Référence produit:

5MP7150.101E-000

Description:

10.1" TFT WXGA color display
Single-touch (analog resistive)
Freescale i.MX6 single core 1 GHz
22 system keys
Stop button
3-position enable switch
Key switch

Mobile Panel 7100 10.1" WXGA TFT - 1280 x 800 pixels - Single-touch (analog resistive) - Cortex-A9 processor - For mapp View and VNC - 1x Ethernet 10/100, 1x USB 2.0 - 1x key switch - 1x stop button - 1x enable switch - 21x system keys, 5x LEDs

Accessoires obligatoires

Attachment cables

5CAMPH.0018-40	Attachment cable for MP7100 and MP7200 - Push-Pull circular connector - 1.8 m
5CAMPH.0050-40	Attachment cable for MP7100 and MP7200 - Push-Pull circular connector - 5 m
5CAMPH.0100-40	Attachment cable for MP7100 and MP7200 - Push-Pull circular connector - 10 m
5CAMPH.0150-40	Attachment cable for MP7100 and MP7200 - Push-Pull circular connector - 15 m
5CAMPH.0200-40	Attachment cable for MP7100 and MP7200 - Push-Pull circular connector - 20 m

Control cabinet cables

5CAMPC.0020-10	Mobile Panel control cabinet cable - Push-Pull circular connector - Ethernet crossover - 2 m
5CAMPC.0020-11	Mobile Panel control cabinet cable - Push-Pull circular connector - Ethernet straight-through - 2 m

mapp View and VNC Client

5SWVIS.MP47-ENG	mapp View and VNC client - English - For MP7150 - Installation (without Recovery DVD) - Only available with a new device

Accessoires optionnels

Accessories

4MPCBX.0000-00	Mobile Panel connection box - For cables with push-pull circular connectors
4MPCBX.0001-00	Mobile Panel small connection box - For cables with push-pull circular connectors
5ACCWB50.0000-000	Mobile Panel 7100 wall mount - For MP7150/MP7151
5CAMPB.0050-10	Mobile Panel box cable - With wire end sleeves - With connector contacts - 5 m
5CAMPB.0100-10	Mobile Panel box cable - With wire end sleeves - With connector contacts - 10 m

Automation Studio HW Upgrades	Version (date)	Téléchargement
V4.2 HW Upgrade (5MP7150.101E-000)		EXE / 356 Ko Identification pour téléchargement
V4.3 HW Upgrade (5MP7150.101E-000)		EXE / 543 Ko Identification pour téléchargement

Certifications	Version (date)	Téléchargement
TÜV certificate - safety function of the connection box 4MPCBX.0000-000		PDF / 665 Ko Identification pour téléchargement

Documentation	Version (date)	Téléchargement
Mobile Panel 7100 Device number key		PDF / 196 Ko Identification pour téléchargement
Mobile Panel 7100 User's manual		PDF / 19 Mo Identification pour téléchargement

E-CAD (modèles Electro ou EPLAN)	Version (date)	Téléchargement
Panel EPLAN P8 from V2.4		EXE / 67 Mo Identification pour téléchargement

M-CAD (modèles mécaniques)	Version (date)	Téléchargement
3D file STEP 5ACCWB50.0000-000		ZIP / 82 Ko Identification pour téléchargement
3D file STEP 5MP715x.101E-xxx		ZIP / 4 Mo Identification pour téléchargement