0PS1050.1

General information

Status display	Green LED (DC OK), threshold value U_out = 21.5 V
Isolation voltage
Input - Output	4 kV AC (type test) 2 kV AC (routine test)
Input - PE	2 kV AC (type test) 2 kV AC (routine test)
Output - PE	500 VDC (type test)
Type of connection	Screw terminal
Connection cross section
Wire end sleeves	Flexible cables require wire end sleeves in order to fulfill EN 62368 / UL 60950
Flexible	0.2 to 2.5 mm² / 24 to 14 AWG
Inflexible	0.2 to 2.5 mm² / 24 to 14 AWG
Wire stripping length	9 mm (input/output)
Certification
CE	Yes
cULus

Input

Nominal input voltage	100 to 240 VAC
Input voltage	AC 85 to 264 V (wide range), 45 to 65 Hz
Input current	Approx. 1.65 A (120 VAC) Approx. 0.9 A (230 VAC)
Starting current limitation	<15 A
I²t	1.1 A²s
Power failure bypass	>20 ms (120 VAC) >110 ms (230 VAC)
Turn-on time	<1 s
Power factor (cos φ)	0.72
Discharge current to PE	<3.5 mA
Protective circuit	Transient surge protection with varistor
Internal fuse	3.15 A slow-blow
Required line fuse for line protection	6 A 10 A 16 A (characteristic B)

Output

Nominal voltage	24 VDC ±1%
Output power	120 W
Setting range for output voltage	22.5 to 29.5 VDC
Output current
-25 to 55°C	5 A
>55°C	Derating: 2.5% per °C
Current limitation	Approx. 10 A (for short circuit)
Control deviation	<1% (static load change 10 to 90%) <2% (dynamic load change 10 to 90%) <0.1% (input voltage change ±10%)
Rise time	<2 ms (U_OUT (10 to 90%))
Residual ripple	<20 mV_SS
Switching spikes	<30 mV_SS
Can be connected in parallel	Yes, to establish redundancy and increase capacity
Can be connected in series	Yes
Max. capacitive load	Unlimited
Protection against internal overvoltages	Yes, limited to <35 VDC
Protection functions	Output protected against continuous short circuit, open circuit and overload
Power back immunity	Max. 35 VDC
Output noise suppression	Device complies with EN 55011 (class B)

Efficiency, reliability

Effectiveness	>89%
MTBF	>500,000 h, per IEC 61709 (SN 29500)
Power loss
Rated load	Max. 18 W
No-load operation	Max. 1.1 W

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	No
Installation at elevations above sea level
Maximum	4000 m
Ventilation / Cooling	Normal convection, no fan required
EN 60529 protection	IP20
Rated protection	I, with PE connection

Environmental conditions

Temperature
Operation	-25 to 70°C (>55°C derating)
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	Max. 95%, non-condensing
Vibration
Operation	<15 Hz, amplitude ±2.5 mm, per IEC 60068-2-6 15 to 150 Hz, 2.3 g, 90 min
Shock
Operation	15 g in each direction, per IEC 60068-2-27
Degree of pollution	2, per EN 50178
Climate category	3K3, per EN 60721

Mechanical characteristics

Housing
Materials	Steel sheet, galvanized Side panels: Aluminum
Installation	Easy top-hat rail installation (NS 35 rails, EN 60715)
Dimensions
Width	40 mm
Height	130 mm
Depth	115 mm
Weight	600 g

Référence produit:

0PS1050.1

Description:

100 to 240 VAC wide-range input
High dielectric strength
Can be connected in parallel for increased capacity and redundancy
Reliable operation due to long power failure bypass function under full load and high MTBF (>500,000 h)
International certification package
Wide temperature range from -25 to 70°C
Slender design
Closed metal housing

24 VDC power supply, 1-phase, 5 A, input 100 to 240 VAC, wide range, top-hat rail installation

Certifications	Version (date)	Téléchargement
EU Declaration Power supplies		PDF / 309 Ko Identification pour téléchargement

Documentation	Version (date)	Téléchargement
Datasheet 0PS1050.1		PDF / 429 Ko Identification pour téléchargement
Installation- / EMC-Guide		PDF / 20 Mo Identification pour téléchargement

Généralités	Version (date)	Téléchargement
Power Supply Statement-Directive 2009/125/EC		PDF / 20 Ko Identification pour téléchargement

M-CAD (modèles mécaniques)	Version (date)	Téléchargement
3D file DXF/STEP 0PS1050.0		ZIP / 363 Ko Identification pour téléchargement