General information
Controller
nvSRAM | |
Size | 512 kB |
Data retention | 20 years |
Read/Write endurance | Min. 1,000,000 |
Remanent variables in power failure mode | 256 kB (for e.g. Automation Runtime, see Automation Help) |
Interfaces
Electrical properties
Power consumption | 2 W |
Operating conditions
Pollution degree per EN 61131-2 | Pollution degree 2 |
Ambient conditions
Temperature | |
Operation | -20 to 55°C |
Storage | -20 to 60°C |
Transport | -20 to 60°C |
Relative humidity | |
Operation | 5 to 90%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Weight | 25 g |
Référence produit:
5ACCIF01.FPSC-001Description:
- 1x POWERLINK interface managing or controlled node
- 1x CAN bus master interface
- 1x X2X Link master interface
- 1x RS232 interface
- 512 kB nvSRAM
- Compatible with APC2100/PC2100 and APC2200/PPC2200
Interface option 5ACCIF01.FPSC-001 is equipped with a POWERLINK, RS232, CAN bus master and X2X Link master interface. In addition, 512 kB nvSRAM is installed.
Accessoires optionnels
Terminal blocks
0TB1210.3100 | Connector 300 VDC - 10-pin female - Cage clamp terminal block - Protected against vibration by the screw flange |
Automation Studio HW Upgrades | Version (date) | Téléchargement |
---|---|---|
V4.0 HW Upgrade (5ACCIF01.FPSC-001) | EXE / 645 Ko | |
V4.1 HW Upgrade (5ACCIF01.FPSC-001) | EXE / 904 Ko |
E-CAD (modèles Electro ou EPLAN) | Version (date) | Téléchargement |
---|---|---|
APC EPLAN P8 from V2.4 | EXE / 99 Mo |
Firmware Upgrades | Version (date) | Téléchargement |
---|---|---|
APC2100 Firmware Upgrade (MTCX, SDLT, SDL3T) | ZIP / 2 Mo | |
PPC2100 Firmware Upgrade (MTCX) | ZIP / 4 Mo |