Por favor elija país e idioma:

Short description
I/O module 4 inputs for KTY10-6, KTY84-130, PT100 or PT1000 resistance temperature measurement
General information
B&R ID code 0x1488
Status indicators I/O function for each channel, supply voltage, bus function
Diagnostics
Inputs Yes, using status LED and software
I/O power supply Yes, using status LED and software
Connection type
X2X Link M12, B-keyed
Inputs 4x M12, A-keyed
I/O power supply M8, 4-pin
Power consumption
Internal I/O 1.5 W
X2X Link power supply 0.75 W
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA IIA T5 Gc
IP67, Ta = 0 - Max. 60°C
TÜV 05 ATEX 7201X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
EAC Yes
KC Yes
I/O power supply
Nominal voltage 24 VDC
Voltage range 18 to 30 VDC
Integrated protection Reverse polarity protection
Resistance measurement temperature inputs
Input Resistance measurement with constant current supply for 2-wire or 4-wire connections
Digital converter resolution 16-bit
Filter time Configurable between 2 and 20 ms
Conversion time
Same sensor types 75 ms per channel with 50 Hz filter
When switching sensor type 195 ms per channel with 50 Hz filter
Conversion procedure Sigma-delta
Output format INT or UINT for resistance measurement
Sensor
Sensor type Configurable per channel
KTY10-6 -50 to 145°C
KTY84-130 -40 to 300°C
PT100 -200 to 850°C
PT1000 -200 to 850°C
Resistance measurement range 0.1 to 4500 Ω / 0.05 to 2250 Ω
Sensor standard EN 60751
Common-mode range ±1 VDC
Insulation voltage between channel and bus 500 VEff
Linearization method Software
Measurement current 250 µA ±1.25%
Reference 4530 Ω ±0.1%
Permissible input signal Short-term max. ±30 V
Max. error at 25°C
Gain 0.01%
Offset 0.015%
Max. gain drift 0.003 %/°C
Max. offset drift 5.25 mΩ/°C
Nonlinearity <0.002%
Crosstalk between channels <-70 dB
Temperature sensor resolution
KTY10-6 1 LSB = 0.1°C
KTY84-130 1 LSB = 0.1°C
PT100 1 LSB = 0.1°C
PT1000 1 LSB = 0.1°C
Resistance measurement resolution
G = 1 1 LSB = typ. 69.1223 mΩ ±0.1%
G = 2 1 LSB = typ. 34.5611 mΩ ±0.1%
Input filter
Cutoff frequency 115 Hz / Filter 1st order
Slope -20 dB
Common-mode rejection
50 Hz >70 dB
DC >70 dB
Temperature measurement monitoring
Range undershoot 0x8001
Range overshoot 0x7FFF
Open circuit 0x7FFF
General fault 0x8000
Open inputs 0x7FFF
Resistance measurement monitoring
Range undershoot 0x0000
Range overshoot 0xFFFF
Open circuit 0xFFFF
General fault 0xFFFF
Open inputs 0xFFFF
Electrical properties
Electrical isolation
Channel isolated from bus

Channel not isolated from channel
Operating conditions
Mounting orientation
Any Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP67
Ambient conditions
Temperature
Operation -25 to 60°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Mechanical properties
Dimensions
Width 53 mm
Height 85 mm
Depth 42 mm
Weight 200 g
Torque for connections
M8 Max. 0.4 Nm
M12 Max. 0.6 Nm
Material number:
X67AT1322
Description:
  • 4 inputs for resistance temperature measurement
  • PT100, PT1000 and other resistance temperature sensors
  • Direct resistance measurement
  • Configurable sensor type per channel
  • 2-wire and 4-wire measurement

The module is a temperature module for KTY10, KTY84, PT100 and PT1000 resistance temperature sensors. The sensors can be connected using 2-wire or 4-wire connections. The sensor type can be configured for each input.

Automation Studio HW Upgrades Version (Date) Download
V2.7 HW Upgrade (X67AT1322) EXE / 458 KB
V3.0 HW Upgrade (X67AT1322) EXE / 458 KB
V4.0 HW Upgrade (X67AT1322) EXE / 512 KB
Certificates Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
E115267 UL CoC X67 PDF / 84 KB
TÜV 05 ATEX 7201 X PDF / 129 KB
X20, X67 KC certificates PDF / 6 MB
Documentation Version (Date) Download
Datasheet X67AT1322 PDF / 389 KB
X67 System User´s Manual PDF / 19 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X67 EPLAN P8 EXE / 85 MB
X67 EPLAN P8 from V2.4 EXE / 105 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X67 ZIP / 1 MB

Por favor elija país e idioma:

B&R Logo

Please choose country

B&R Logo