5LS182.6-2

Short description

Communication module	1x POWERLINK (V1/V2) managing or controlled node

General information

B&R ID code	0xAAC0
Ready relay	Normally open and normally closed contact, max. 30 VDC, max. 10 A
Status indicators	Status of POWERLINK node, network activity, link
Diagnostics
Bus function	Yes, using status LED and software
Station status	Yes, using status LED and software
Power consumption	2 W
Electrical isolation
PC - IFx	Yes
Certifications
CE	Yes
UL	cULus E115267 Industrial control equipment
EAC	Product family certification

Controller

SRAM	1 MB, battery-backed

Interfaces

Fieldbus	POWERLINK (V1/V2) managing or controlled node
Type	Type 4
Variant	2x shielded RJ45 (hub)
Cable length	Max. 100 m between 2 nodes (segment length)
Transfer rate	100 Mbit/s
Transfer
Physical layer	ANSI/IEEE 802.3
Half-duplex	Yes
Full-duplex	POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation	Yes
Auto-MDI/MDIX	Yes
Hub propagation delay	0.96 to 1 µs

Operating conditions

Degree of protection per EN 60529	IP20 when installed

Ambient conditions

Temperature
Operation	0 to 55°C
Storage	-25 to 70°C
Transport	-25 to 70°C
Relative humidity
Operation	0 to 95%, non-condensing
Storage	0 to 95%, non-condensing
Transport	0 to 95%, non-condensing

Mechanical properties

Note	Order 1x TB704 terminal block separately Lithium battery included in content of delivery
Slot	Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC	Yes
B&R Panel PC	Yes
Desktop PC	Yes

Material number:

5LS182.6-2

Description:

POWERLINK (V1/V2) for real-time Ethernet communication
Integrated hub for efficient cabling
Configurable ring redundancy
Poll response chaining

Logic scanner, PCI half-size module, 1 POWERLINK (V1/V2) interface, managing or controlled node, integrated 2-port hub, ring redundancy function, PRC function, 1 MB SRAM (Automation Runtime), order 1x TB704 terminal block separately

Mandatory Accessories

Terminal blocks

0TB704.9	Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²
0TB704.91	Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²

Optional Accessories

Batteries

0AC201.91	Baterías de litio 4 u., 3 V / 950 mAh pila de botón
4A0006.00-000	Batería de litio, 3 V / 950 mAh pila de botón

Automation Studio HW Upgrades	Version (Date)	Download
V2.6 HW Upgrade (5LS182.6-2)		EXE / 615 KB Login for download
V3.0 HW Upgrade (5LS182.6-2)		EXE / 2 MB Login for download
V3.0 HW Upgrade (5LS182.6-2)		EXE / 642 KB Login for download
V4.0 HW Upgrade (5LS182.6-2)		EXE / 2 MB Login for download

Documentation	Version (Date)	Download
Datasheet 5LS182.6-2		PDF / 8 MB Login for download

E-CAD (Electro or EPLAN Templates)	Version (Date)	Download
APC EPLAN P8 from V2.4		EXE / 38 MB Login for download