5LS182.6-2

Short description

Communication module	1x POWERLINK (V1/V2) managing or controlled node

General information

B&R ID code	0xAAC0
Ready relay	Normally open contact and normally closed contact, max. 30 VDC, max. 10 A
Status indicators	Status of the POWERLINK station, network activity, link
Diagnostics
Bus function	Yes, using LED status indicator and software
Station status	Yes, using LED status indicator and software
Power consumption	2 W
Electrical isolation
PC - IFx	Yes
Certifications
CE	Yes
UL	cULus E115267 Industrial control equipment
EAC	Product family certification

Controller

SRAM	1 MB, battery-backed

Interfaces

Fieldbus	POWERLINK (V1/V2) managing or controlled node
Type	Type 4
Variant	2x shielded RJ45 (hub)
Line length	Max. 100 m between 2 stations (segment length)
Transfer rate	100 Mbit/s
Transfer
Physical layer	ANSI/IEEE 802.3
Half-duplex	Yes
Full-duplex	POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation	Yes
Auto-MDI/MDIX	Yes
Hub propagation delay	0.96 to 1 µs

Operating conditions

Degree of protection per EN 60529	IP20 in installed state

Ambient conditions

Temperature
Operation	0 to 55°C
Storage	-25 to 70°C
Transport	-25 to 70°C
Relative humidity
Operation	0 to 95%, non-condensing
Storage	0 to 95%, non-condensing
Transport	0 to 95%, non-condensing

Mechanical properties

Note	Order 1x terminal block TB704 separately. Lithium battery included in content of delivery
Slot	Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC	Yes
B&R Panel PC	Yes
Desktop PC	Yes

Номер модель:

5LS182.6-2

Описание:

POWERLINK (V1/V2) for real-time Ethernet communication
Integrated hub for efficient cabling
Configurable ring redundancy
Poll response chaining

Logic scanner module 5LS182.6-2 is a PCI half-size module. It supports plug and play and has 1 MB SRAM for remanent data (process variables and data objects). Memory available for remanent process variables depends on the CPU, Automation Runtime, etc.

5LS182.6-2 is a high-performance POWERLINK managing node solution in accordance with specification EPSG DS301. This integrated hub allows for easy implementation of either a simple tree structure or optional ring redundancy without extra effort.

With poll-response chaining, the module offers a solution for the highest demands on response time and the shortest cycle times. Especially for central control tasks, poll-response chaining in combination with the B&R control system provides ideal performance.

The module is also equipped with a ready relay.

Включено в комплект поставки

Batteries

4A0006.00-000	Литиевая батарея, 3 В / 950 мА·ч, кнопочная

Обязательные аксессуары

Terminal blocks

0TB704.9	Принадлежность, 4-контактная клеммная колодка с винтовыми зажимами 2,5 мм²
0TB704.91	Принадлежность клеммная колодка, 4-контактная, нажимная клеммная колодка 2,5 мм²

Дополнительные аксессуары

Batteries

0AC201.91	Литиевые батареи, 4 шт., 3 В / 950 мА·ч, кнопочные

E-CAD (Electro или EPLAN шаблоны)	Версия (Дата)	Загрузка
APC EPLAN P8 from V2.4		EXE / 99 МБ Авторизироваться для загрузки

Документация	Версия (Дата)	Загрузка
Data sheet 5LS182.6-2		PDF / 4 МБ Авторизироваться для загрузки

Обновление Automation Studio HW	Версия (Дата)	Загрузка
V2.6 HW Upgrade (5LS182.6-2)		EXE / 615 кБ Авторизироваться для загрузки
V3.0 HW Upgrade (5LS182.6-2)		EXE / 2 МБ Авторизироваться для загрузки
V3.0 HW Upgrade (5LS182.6-2)		EXE / 642 кБ Авторизироваться для загрузки
V4.0 HW Upgrade (5LS182.6-2)		EXE / 3 МБ Авторизироваться для загрузки
V6.0 HW Upgrade (5LS182.6-2)		EXE / 3 МБ Авторизироваться для загрузки