General information
B&R ID code 0x25B7
Status LED Yes (color / blink code)
24 VDC OUT power supply (DCOK LED) = Yes (color / blink code)
Status indicators Operating status and power supply
Power supply 24 VDC OUT: Yes, using LED and software
24 VDC X2X: Yes, using software
X2X Link Yes, using software
Overload Yes, using LED and software (outputs)
Power consumption
Internal I/O Max. 1.5 W (without load)
X2X Link power supply Max. 0.75 W
Electrical isolation
Digital outputs - 24 VDC X2X, OUT power supply No
X2X Link - 24 VDC X2X, OUT power supply Yes
X2X Link - Digital outputs Yes
Remote valve terminal connection for 25-pin DSUB multi-pin connection 16 valves
CE Yes
ATEX Zone 2, II 3G Ex nA IIA T5 Gc
IP67, Ta = 0 - Max. 60°C
TÜV 05 ATEX 7201X
UL cULus E115267
Industrial control equipment
Bus connection M12
GND pin 13, 22, 23, 24, 25
Power supply M8
User interface
Variant M12
Type X2X Link slave
Digital outputs
Switching voltage 24 VDC ±25%
Total nominal current 1.6 A
Output circuit Source
Output protection Protected against short circuit, overload and overtemperature
Switching delay
0 → 1 Typ. 100 μs / max. 150 μs
1 → 0 Typ. 125 μs / max. 200 μs
Type High-side driver (source)
Max. output current 0.1 A
Max. switching frequency 100 Hz
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Degree of protection per EN 60529 IP67
Ambient conditions
Operation 0 to 55°C
Storage -20 to 70°C
Transport -20 to 70°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order male/female M12/M8 connectors separately
Installation 25-pin DSUB, screw mounting, 4-40 UNC
Weight 131 g
Module dimensions including mounting plates 67 x 66 x 30 mm (H x W x D)
Material number:
Remote valve terminal connection, 16 digital outputs, 0.1 A, 24 VDC, for 25-pin DSUB multipin connector, GND pin 13, 22, 23, 24, 25, X2X Link, electrically isolated, IP67 protection
Automation Studio HW Upgrades Version (Date) Download
V2.6 HW Upgrade (7XV116.50-62) EXE / 394 KB
V3.0 HW Upgrade (7XV116.50-62) EXE / 394 KB
V4.0 HW Upgrade (7XV116.50-62) EXE / 570 KB
Certificates Version (Date) Download
Safe cutoff of potential groups PDF / 735 KB
Documentation Version (Date) Download
Compact I/O User's Manual PDF / 4 MB
XV Users's Manual PDF / 4 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D data DXF / STEP XV IP67 ZIP / 8 MB

Please choose country and language

B&R Logo