Please choose country and language

General information
Battery
Type Renata 950 mAh
Service life 2 years
Removable Yes, on back above handle
Variant Lithium Ion
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
Controller
Bootloader Automation Runtime
Processor
Type Geode SC2200
Clock frequency 266 MHz
L1 cache 16 kB
L2 cache No
Floating point unit (FPU) Yes
MMX-compatible Yes
Mode/Node switches 2, 16 positions each (back side)
Watchdog Internal system management controller
Real-time clock
Accuracy Typically 20 ppm (1.7 seconds) per day
Battery-backed Yes
Graphics
Controller Geode SC2200
Memory 4 MB shared memory (reserved by main memory)
SRAM
Size 256 kB
Battery-backed Yes
Interfaces
COM1
Type RS232, modem-capable, not electrically isolated
Variant 9-pin DSUB plug
UART 16550-compatible, 16-byte FIFO
Max. baud rate 115 kbit/s
CompactFlash slot 1
Type Type I
Connection Primary IDE
USB
Quantity 1
Type USB 1.1
Variant Type A
Transfer rate Low speed (1.5 Mbit/s), full speed (12 Mbit/s)
Ethernet
Quantity 1
Controller MacPhyter DP83816
Transfer rate 10/100 Mbit/s
Max. baud rate 100 Mbit/s
CAN
Quantity 1
Controller SJA1000
Connection Via Mobile Panel cable
Display
Type Color TFT
Diagonal 8.4" (213.4 mm)
Colors 256
Resolution VGA, 640 x 480 pixels
Contrast 250:1
Viewing angles
Horizontal Direction R / Direction L = 55°
Vertical Direction U = 55°/ direction D = 40°
Backlight
Brightness 120 cd/m²
Half-brightness time 50,000 h
Filter glass
Transmittance -
Anti-reflective coating -
Touch screen
Type AMT
Technology Analog, resistive
Controller Hampshire, serial, 12-bit
Transmittance Up to 78%
Keys
Function keys No
Soft keys No
System keys Numeric keys
4 system keys
3-axis joystick No
Electronic handwheel No
Illuminated button No
Emergency switch-off 2 N.C. contacts, right position
Enable switch 3-step, 2-channel, located on front of handle
Override potentiometer No
Key switch Yes
Service life > 1,000,000 actuations at 1 ±0.3 N to 3 ±0.3 N actuating force
LEDs No
Electrical properties
Nominal voltage 24 VDC ±25% (integrated reverse polarity protection)
Inrush current Max. 20 A for approx. 1 ms
Power consumption Typ. approx. 8 W, max. 10 W
Galvanic isolation No
Operating conditions
Drop height 1 m to industrial floor
Flame-retardant UL94V-0
Degree of protection per EN 60529 IP54 protection against dust and sprayed water (only with handle 4MPHDL.0000-00)
Ambient conditions
Temperature
Operation 0 to 45°C
Storage -20 to 70°C
Transport -20 to 70°C
Vibration
Operation (continuous) 2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g
Operation (occasional) 2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g
Storage 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Transport 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Shock
Operation 15 g, 11 ms
Storage 30 g, 15 ms
Transport 30 g, 15 ms
Elevation
Operation Max. 2000 m
Mechanical properties
Housing
Material Double-walled plastic housing (Cycoloy C2950)
Coating Soft-touch coating, similar to RAL7016
Front
Design Gray
Panel overlay
Material Polyester
Light background color Similar to Pantone 427CV
Dark gray keys Similar to Pantone 431CV
Orange keys Similar to Pantone 151CV
Gasket Flat gasket around display front
Dimensions
Width 306.6 mm
Height 76 mm
Depth 270.6 mm
Weight Approx. 1900 g
Material number:
4MP281.0843-13
Description:
Mobile Panel MP281 Operating Unit; 8.4" VGA color TFT display with touch screen (resistive); 19 system keys; key operated push button and E-stop. 64 MB SDRAM; 256 KB SRAM; CompactFlash slot (type I); ETH 10/100; CAN; USB 1.1; battery; 24 VDC. Handle and cables must be ordered separately.
Mandatory Accessories
Attachment cables
5CAMPH.0018-10 MP100/200 Connecting Cable with Push Pull connector for cabinet cable, 1.8 m.
5CAMPH.0050-00 Mobile Panel Connecting Cable, 5 m.
5CAMPH.0050-10 MP100/200 Connecting Cable with Push Pull connector for cabinet cable, 5 m.
5CAMPH.0070-00 Mobile Panel Connecting Cable, 7 m
5CAMPH.0100-00 Mobile Panel Connecting Cable, 10 m.
5CAMPH.0100-10 MP100/200 Connecting Cable with Push Pull connector for cabinet cable, 10 m.
5CAMPH.0150-00 Mobile Panel Connecting Cable, 15 m.
5CAMPH.0150-10 MP100/200 Connecting Cable with Push Pull connector for cabinet cable, 15 m.
5CAMPH.0200-00 Mobile Panel Connecting Cable, 20 m.
5CAMPH.0200-10 MP100/200 Connecting Cable with Push Pull connector for cabinet cable, 20 m.
Control cabinet cables
5CAMPC.0020-00 Mobile Panel Cabinet Cable Ethernet Crossover, 2 m.
5CAMPC.0020-01 Mobile Panel Cabinet Cable Ethernet straight through, 2 m.
Handles
4MPHDL.0000-00 Mobile Panel Handle; with integrated 3-step enabling switch.
Optional Accessories
Accessories
4MPBRA.0000-00 MP100/200 Wall Bracket.
4MPBYP.0000-00 Mobile Panel lock pull bypass connector for control cabinet cable 5CAMPC.0020-00, 5CAMPC.0020-01.
5AC900.1100-00 Stylus pen for touch screen, 5 pcs.
Batteries
0AC201.91 Lithium batteries 4 pcs., 3 V / 950 mAh button cell
4A0006.00-000 Lithium battery, 3 V / 950 mAh, button cell
CompactFlash cards
5CFCRD.0064-03 CompactFlash 64 MB Western Digital (SLC)
5CFCRD.0128-03 CompactFlash 128 MB Western Digital (SLC)
5CFCRD.0256-03 CompactFlash 256 MB Western Digital (SLC)
5CFCRD.0512-03 CompactFlash 512 MB Western Digital (SLC)
5CFCRD.1024-03 CompactFlash 1 GB Western Digital (SLC)
5CFCRD.2048-03 CompactFlash 2 GB Western Digital (SLC)
5CFCRD.4096-03 CompactFlash 4 GB Western Digital (SLC)
5CFCRD.8192-03 CompactFlash 8 GB Western Digital (SLC)
USB accessories
5MMUSB.2048-01 USB 2.0 flash drive 2048 MB B&R
Automation Studio HW Upgrades Version (Date) Download
AS 2.6 Upgrade 4MP281.0843-13 EXE / 430 KB
AS 3.0 Upgrade 4MP281.0843-13 EXE / 429 KB
V4.1 HW Upgrade (4MP281.0843-13) EXE / 522 KB
Documentation Version (Date) Download
Dimensions pdf 4MP281.0843-13 PDF / 1 MB
Mobile Panel 100/200 User's Manual PDF / 14 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
Panel EPLAN P8 from V2.4 EXE / 134 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D file DXF/STEP 4MP181.0843-03, 4MP281.0843-13, 5MP181.0843-07 ZIP / 9 MB

Please choose country and language

B&R Logo