General information
B&R ID code 0x1CE6
Status LED Yes (color / blink code)
24 VDC OUT power supply (DCOK LED) = Yes
Status indicators Operating status and power supply
Diagnostics
Power supply 24 VDC OUT: Yes, using LED and software
24 VDC X2X: Yes, using software
X2X Link Yes, using software
Overload Yes, using software (outputs)
Input capacitance
Module power supply 47 µF / 7.5 Ω
I/O power supply 47 µF
Power consumption Max. 0.75 W
Electrical isolation
Digital outputs - 24 VDC X2X, OUT power supply No
X2X Link - 24 VDC X2X, OUT power supply Yes
X2X Link - Digital outputs Yes
Remote valve terminal connection for 25-pin DSUB multi-pin connection 16 valves
Certifications
CE Yes
UKCA Yes
UL cULus E115267
Industrial control equipment
Circuit
Bus connection 11-pin
GND pin 13, 22, 23, 24, 25
Power supply via bus connector
Interfaces
User interface
Variant 11-pin male multipoint connector
Type X2X Link slave
Digital outputs
Switching voltage 24 VDC ±25%
Total nominal current 1.6 A
Output circuit Source
Output protection Protected against short circuit, overload and overtemperature
Switching delay
0 → 1 Typ. 150 μs / max. 200 μs
1 → 0 Typ. 175 μs / max. 250 μs
Type High-side driver (source)
Max. output current 0.1 A
Max. switching frequency 100 Hz
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation 0 to 55°C
Storage -20 to 70°C
Transport -20 to 70°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block 0TB1111.8110 separately.
Installation 25-pin DSUB, screw mounting, 4-40 UNC
Weight 56 g
Module dimensions including mounting plates 63 x 59 x 20 mm (H x W x D)
Material number:
7XV116.50-12
Description:
Remote valve terminal connection, 16 digital outputs, 0.1 A, 24 VDC, for 25-pin DSUB multipin connector, GND pins 13, 22, 23, 24, 25, X2X Link, electrically isolated, IP20 protection, order 1x terminal block 0TB1111 separately!
Mandatory Accessories
Terminal blocks
0TB1111.8010 Accessory screw clamp terminal block, 11-pin, screw clamp terminal block 1.5 mm², protected against vibration by the screw flange
0TB1111.8110 Accessory terminal block, 11-pin, cage clamp, 1.5 mm², protected against vibration by the screw flange
Automation Studio HW Upgrades Version (Date) Download
V4.0 HW Upgrade (7XV116.50-12) EXE / 727 KB
Certificates Version (Date) Download
Safe cutoff of potential groups PDF / 211 KB
Documentation Version (Date) Download
Compact I/O User's Manual PDF / 4 MB
XV Users's Manual PDF / 4 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D data DXF / STEP XV IP20 ZIP / 2 MB

Please choose country and language

B&R Logo