DWL@DWL10000716307
| Version | Sprog | Operativ system | Dato | Størrelse | Type | Download |
|---|---|---|---|---|---|---|
| 1.05 | * | 14/04/2023 | 1 MB | ZIP | UPG_PPC1200_MTCX_V0105_EFI.zip | |
| Beskrivelse |
PPC1200 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.05 / 03/22/2023 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Content LIESMICH.txt 01.05 NEW README.txt 01.05 NEW STARTUP.nsh 01.05 NEW MTCXxPC3100.nsh 01.03 MTCXSVC.efi 19.52 42652_0.fw 01.05 NEW 42683_0.fw 01.05 NEW 42734_0.fw 01.05 NEW 42735_0.fw 01.05 NEW 42736_0.fw 01.05 NEW 42737_0.fw 01.05 NEW 42738_0.fw 01.05 NEW 42739_0.fw 01.05 NEW Change(s) 42652_0.fw, 42683_0.fw, 42734_0.fw, 42735_0.fw, 42736_0.fw, 42737_0.fw, 42738_0.fw, 42739_0.fw (MTCX Firmware): - Optimized internal power supply. - Support of alternative/new temperature sensors. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
| Version | Sprog | Operativ system | Dato | Størrelse | Type | Download |
| 1.04 | * | 15/02/2022 | 1 MB | ZIP | UPG_PPC1200_MTCX_V0104_EFI.zip | |
| Beskrivelse |
PPC1200 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.04 / 11/15/2021 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Content LIESMICH.txt 01.04 NEW README.txt 01.04 NEW STARTUP.nsh 01.03 MTCXxPC3100.nsh 01.03 MTCXSVC.efi 19.52 NEW 42652_0.fw 01.04 NEW 42683_0.fw 01.04 NEW 42734_0.fw 01.04 NEW 42735_0.fw 01.04 NEW 42736_0.fw 01.04 NEW 42737_0.fw 01.04 NEW 42738_0.fw 01.04 NEW 42739_0.fw 01.04 NEW Change(s) 42652_0.fw, 42683_0.fw, 42734_0.fw, 42735_0.fw, 42736_0.fw, 42737_0.fw, 42738_0.fw, 42739_0.fw (MTCX Firmware): - Bugfix: In combination with UEFI operating systems and BIOS settings set to UEFI only, it could sporadically happen, that no BIOS messages are visible during a operating system reboot. Outputs are visible again when the graphic driver was started by the operating system. - Optimized display timings. MTCXSVC: - Minor optimizations and bug fixes. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
