Short description
I/O module 8 digital inputs/outputs 9 to 32 VDC for 1-wire connections
General information
B&R ID code 0xEBC2
Status indicators -
Diagnostics
Diagnostic outputs In the application using current measurement
Power consumption 0.91 W
Electrical isolation
Digital - Digital No
Certifications
UN ECE-R10 Yes
CE Yes
UKCA Yes
Multi-function outputs
Multifunction PWM outputs (MF-PWM)
Quantity 8
Functions 4 A nominal current / channel
PWM frequency 15 Hz to 1 kHz,
digital input/output, sink/source circuit - configurable per channel, configurable software input filter, configurable switch-on/switch-off ramp, integrated output protection
Digital inputs
Quantity 0 to 8, depends on the use of multifunction inputs/outputs
Input voltage 9 to 32 VDC
Input current at 24 VDC Typ. 2.7 mA
Input circuit Sink/Source, configurable
Input filter
Hardware 100 µs
Software Default 1 ms, configurable between 0 and 25 ms in 0.1 ms increments
Input resistance Typ. 9 kΩ
Switching threshold 45% supply voltage
Digital outputs
Quantity 0 to 8, depends on the use of multifunction inputs/outputs
PWM output
Quantity 0 to 8, depends on the use of multifunction inputs/outputs
Nominal voltage 12/24 VDC
Supply voltage (permissible range) 9 to 32 VDC
Nominal current 4 A
Summation current 16 A
PWM frequency 15 Hz to 1 kHz
Duty cycle 0 to 100% in 0.1% steps, resolution <50 μs
Output circuit Sink/Source
Output protection Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads
Variant Current-sourcing/Current-sinking FET
Diagnostic status Output monitoring with 1 ms delay
Leakage current when the output is switched off Max. 50 µA
Residual voltage <0.1 V at 4 A nominal current
Peak short-circuit current 50 A (max. 0.2 ms)
Current measurement
Current measurement range ±10 A
Conversion time 40 μs
Resolution 12-bit (6 mA)
Output format
Data type INT 0x8001 to 0x7FFF
Current 1 LSB = 305 μA
Accuracy ±0.5% ±50 mA
Temperature drift ±0.02%/°C ±1 mA/°C
Common mode error ±3 mA/V
Operating conditions
Mounting orientation
Any Yes
Degree of protection per EN 60529 Up to IP69K
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -40 to 85°C housing surface
Vertical mounting orientation -40 to 85°C housing surface
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 100%, condensing
Storage 5 to 100%, condensing
Transport 5 to 100%, condensing
Mechanical properties
Dimensions
Width 47 mm
Length 95 mm
物料号:
X90PO210.08-00
描述:
  • 9 to 32 VDC
  • 8 PWM outputs
  • 4 A per channel
  • Current measurement
  • Central cutoff
  • X2X Link

The PWM option board offers 8 additional analog outputs that can also be used as digital inputs/outputs. Communication to the mainboard is implemented using X2X Link. In addition, the PWM option board provides current measurement for each channel.

Automation Studio硬件升级 版本(日期) 下载
V4.3 HW Upgrade (X90PO210.08-00) EXE / 1 MB
E-CAD(电子或EPLAN模板) 版本(日期) 下载
X90 EPLAN P8 from V2.4 EXE / 69 MB
文档 版本(日期) 下载
Datasheet X90PO210.08-00 PDF / 358 KB
X90 mobile System User´s Manual PDF / 45 MB
证书 版本(日期) 下载
EU Declaration Industrial sector X90 PDF / 163 KB
EU Declaration Mobile machinery X90 PDF / 146 KB
EU Declaration Railway X90 PDF / 224 KB
UK Declaration Industrial sector X90 PDF / 110 KB
UN ECE-R10 PDF / 382 KB

请选择国家和语言

B&R Logo