8WSB11.ee004jjQop0

General information

Certifications
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	Not applicable

Motor

Nominal speed n_N [rpm]	6000
Number of pole pairs	4
Nominal torque M_n [Nm]	0.005
Nominal current I_N [A]	0.32
Stall torque M₀ [Nm]	0.008
Stall current I₀ [A]	0.37
Maximum torque M_max [Nm]	0.03
Maximum current I_max [A]	1.2
Maximum speed n_max [rpm]	9000
Torque constant K_T [Nm/A]	0.023
Voltage constant K_E [V/1000 rpm]	1.48
Stator resistance R_2ph [Ω]	13.3
Stator inductance L_2ph [mH]	2.47
Electrical time constant t_el [ms]	0.18
Thermal time constant t_therm [min]	1.6
Moment of inertia J [kgcm²]	0.0055
Weight without brake m [kg]	0.13

Gearbox

Number of gear stages	1
Gear ratio i	4
Max. drive speed n_1max [rpm]	10000
Max. backlash J_t [arcmin]	20
Torsional rigidity C_t21 [Nm/arcmin]	0.1
Efficiency at full load ŋ [%]	95
Weight m [kg]	0.02

Recommendations

ACOPOSmicro 80VD100Px.xxxx-01	C03X, C033

Номер модель:

8WSB11.ee004jjQop0

Описание:

Synchronous motor 8WSB11 with direct gearbox mounting, SSI encoder, single-turn, gear ratio = 4, flat-sided shaft end, IP66/67, nominal speed: 6000 rpm, fixed attachment cable 0.5 m with hybrid connector

Обязательные аксессуары

Accessories

8BCM00X5.1B48E-0	8WS/ACOPOSmicro hybrid motor cable, length 0.5 m, ((2x(2x26AWG) + 2x24AWG)C + 3x16AWG)C, 12+3-pin female series 915 hybrid connector, can be used in cable drag chains

Дополнительные аксессуары

Accessories

8BCM0003.1B470-0	8WS hybrid motor cable extension, length 3 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains
8BCM0005.1B470-0	8WS hybrid motor cable extension, length 5 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains
8BCM0010.1B470-0	8WS hybrid motor cable extension, length 10 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains
8BCM0015.1B470-0	8WS hybrid motor cable extension, length 15 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains

Документация	Версия (Дата)	Загрузка
8WS user's manual		PDF / 3 МБ Авторизироваться для загрузки

Обновление DT	Версия (Дата)	Загрузка
V4.0 DT Upgrade (8WSB11.F0004S3QKB0)		EXE / 298 кБ Авторизироваться для загрузки

Сертификаты	Версия (Дата)	Загрузка
EU Declaration Motors 8WS		ZIP / 175 кБ Авторизироваться для загрузки
UK Declaration Motors 8WS		ZIP / 158 кБ Авторизироваться для загрузки