DWL@DWL10000828696
| Versão | Idiomas | Sistema operacional | Data | Tamanho | Tipos | Download |
|---|---|---|---|---|---|---|
| 1.5.0.1 | * | 10/06/2026 | 893 KB | EXE | AS6_HW_X20AI4632.exe | |
| Descrição |
V6.0 HW Upgrade (X20AI4632) Revision information X20AI4632 Version 1.5.0.1: ID: Firmware signature enables automatic verification of the authenticity on the target system The firmware package contains a digital signature that is automatically validated by Automation Runtime versions, which are supporting this feature. Thisensures that the installed firmware is unchanged and comes from a trusted source. Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.5.0.0: ID: TDYD-12871 Adjustment of synchronization monitoring Synchronization Monitoring Revised (applies to modules≥ Rev. I0) The synchronization monitoring has been optimized. At large X2Xcycle times (starting at approx. 4000 μs), false triggers of the "SyncStatus"data point (redLED) occurred. This issue had no impact on the accuracy of the analog input values, but only affected the error detection of the synchronization status. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9), 1\7073_3.fw(104) Version 1.4.0.1: ID: QCAS-3535 CVE-2025-43715: Installer is vulnerable to local privilege escalation The installation system NSIS used by B&R can allow local attackers toescalatetheir privileges. CVE-2025-43715, CVSS: 8.1 (High) CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.4.0.0: ID: TDYD-1274 Support new hardware variant 3 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9), 1\7073_3.fw(103) Version 1.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.7.0: ID: 645710 Module documentation revised Data sheet V3.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.6.0: ID: 583865 Module documentation revised Data sheet V3.05 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.4.0: ID: 522105 Module documentation revised Data sheet V3.02 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.3.0: ID: 425410 Missing information in documentation included Channel description changed: No Configuration description changed: No Firmware changed: No ID: 446290 Correction technical data Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.2.1: ID: 211515 Adjustment SGC section Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.2.0: ID: 193700 Enhancement comparator for Tracetriggercondition Enhancement comparator for Tracetriggercondition Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.1.0: ID: 172225 X20AI4632 no longer works when max. number of samples is set. If theX20AI4632 module is used to record a trace and special trace settingsare used, the module stops working, and ModuleOk changes to FALSE. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.0.0: ID: 166035 New FW V5 and HWC V1.1.0.0. Addition synchronous mode, correction 50 µsec sample time Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(5) |
|||||
| Versão | Idiomas | Sistema operacional | Data | Tamanho | Tipos | Download |
| 1.5.0.0 | * | 09/29/2026 | 880 KB | EXE | AS6_HW_X20AI4632.exe | |
| Descrição |
V6.0 HW Upgrade (X20AI4632) Revision information X20AI4632 Version 1.5.0.0: ID: TDYD-12871 Adjustment of synchronization monitoring Synchronization Monitoring Revised (applies to modules ≥ Rev. I0) The synchronization monitoring has been optimized. At large X2X cycle times (starting at approx. 4000 μs), false triggers of the "SyncStatus" data point (red LED) occurred. This issue had no impact on the accuracy of the analog inputvalues, but only affected the error detection of the synchronization status. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9), 1\7073_3.fw(104) Version 1.4.0.1: ID: QCAS-3535 CVE-2025-43715: Installer is vulnerable to local privilege escalation The installation system NSIS used by B&R can allow local attackers toescalate their privileges. CVE-2025-43715, CVSS: 8.1 (High) CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.4.0.0: ID: TDYD-1274 Support new hardware variant 3 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9), 1\7073_3.fw(103) Version 1.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmwarechanged: no Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.7.0: ID: 645710 Module documentation revised Data sheet V3.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.6.0: ID: 583865 Module documentation revised Data sheetV3.05 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.4.0: ID: 522105 Module documentation revised Data sheet V3.02 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.3.0: ID: 425410 Missing information in documentation included Channel description changed: No Configuration description changed: No Firmware changed: No ID:446290 Correction technical data Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.2.1: ID: 211515 Adjustment SGC section Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.2.0: ID: 193700 Enhancement comparator for Tracetriggercondition Enhancement comparator for Tracetriggercondition Channel description changed: Yes Configurationdescription changed: Yes Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.1.0: ID: 172225 X20AI4632no longer works when max. number of samples is set. If the X20AI4632 module is used to record a trace and special trace settings are used, the module stops working, and ModuleOk changes to FALSE. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.0.0: ID:166035 New FW V5 and HWC V1.1.0.0. Addition synchronous mode, correction 50 µsec sample time Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(5) |
|||||
| Versão | Idiomas | Sistema operacional | Data | Tamanho | Tipos | Download |
| 1.4.0.1 | * | 08/18/2026 | 881 KB | EXE | AS6_HW_X20AI4632.exe | |
| Descrição |
V6.0 HW Upgrade (X20AI4632) Revision information X20AI4632 Version 1.4.0.1: ID: QCAS-3535 CVE-2025-43715: Installer is vulnerable to local privilege escalation The installation system NSIS used by B&Rcan allow local attackers to escalate their privileges. CVE-2025-43715, CVSS: 8.1 (High) CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.4.0.0: ID: TDYD-1274 Support new hardware variant 3 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9), 1\7073_3.fw(103) Version 1.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.7.0: ID: 645710 Module documentation revised Data sheet V3.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.6.0: ID: 583865 Module documentation revised Data sheet V3.05 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.4.0: ID: 522105 Module documentation revised Data sheet V3.02 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.3.0: ID: 425410 Missing information in documentation included Channel description changed: No Configuration description changed: No Firmware changed: No ID: 446290 Correction technical data Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.2.1: ID: 211515 Adjustment SGC section Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.2.0: ID: 193700 Enhancement comparator for Tracetriggercondition Enhancement comparator for Tracetriggercondition Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.1.0: ID: 172225 X20AI4632 no longer works when max.number of samples is set. If the X20AI4632 module is used to record a trace and special trace settings are used, the module stops working, and ModuleOk changes to FALSE. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9),1\7073_2.fw(9) Version 1.1.0.0: ID: 166035 New FW V5 andHWC V1.1.0.0. Addition synchronous mode, correction 50 µsec sample time Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(5) |
|||||
| Versão | Idiomas | Sistema operacional | Data | Tamanho | Tipos | Download |
| 1.4.0.0 | * | 08/21/2025 | 1 MB | EXE | AS6_HW_X20AI4632.exe | |
| Descrição |
V6.0 HW Upgrade (X20AI4632) Revision information X20AI4632 Version 1.4.0.0: ID: TDYD-1274 Support new hardware variant 3 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9), 1\7073_3.fw(103) Version 1.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.7.0: ID: 645710 Module documentation revised Data sheet V3.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.6.0: ID: 583865 Module documentation revised Data sheet V3.05 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.4.0: ID: 522105 Module documentation revised Data sheet V3.02 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.3.0: ID: 425410 Missing information in documentation included Channel description changed: No Configuration description changed: No Firmware changed: No ID: 446290 Correction technical data Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.2.1: ID: 211515 Adjustment SGC section Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.2.0: ID: 193700 Enhancement comparator for Tracetriggercondition Enhancement comparator for Tracetriggercondition Channel description changed: Yes Configuration description changed: Yes Firmware changed:No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.1.0: ID: 172225 X20AI4632 no longer works when max. number of samples is set. If the X20AI4632 module is used to record a trace and special trace settings are used, the module stops working, and ModuleOk changes to FALSE. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(9), 1\7073_2.fw(9) Version 1.1.0.0: ID: 166035 New FW V5 and HWC V1.1.0.0. Addition synchronous mode, correction 50 µsec sample time Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7073_1.fw(5) |
|||||
