DWL@DWL10000216086
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
|---|---|---|---|---|---|---|
| 2.0.1.0 | * | 09/09/2021 | 1 MB | EXE | AS4_HW_80SD100XD.C04X-13.exe | |
| Descrizione |
V4.0 HW Upgrade (80SD100XD.C04X-13) Revision information 80SD100XD.C04X-13.C04X-13 Version 2.0.1.0: ID: 736205 Function model names adapted Uniform function model names for all stepper modules Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(106), 1\42893_3.fw(106), 1\42893_4.fw(106), 1\42893_5.fw(106) Version 2.0.0.0: ID: 671645 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(106), 1\42893_3.fw(106), 1\42893_4.fw(106), 1\42893_5.fw(106) Version 1.9.0.1: ID: 474775 Motion Wizzard revised In AS 4.x, the aged library "AsString" won’t be added to a AS project anymore. The "AsBrStr" will be used by the Motion instead. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(106), 1\42893_3.fw(106), 1\42893_4.fw(106), 1\42893_5.fw(106) Version 1.9.0.0: ID: 474120 Error correction in order to guard motor outputs against short to ground Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(106), 1\42893_3.fw(106), 1\42893_4.fw(106), 1\42893_5.fw(106) Version 1.8.0.0: ID: 400820 Cycle time ofMPGen edjustable Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 400875 Function model Ramp: new mode Mode -120: Set home position Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 400975 Corrected a problem in HWX file Channel description changed: No Configuration description changed: No Firmware changed: No ID: 440975 / Support ID: 400133806 Corrected HWC entry Channel description changed: No Configuration description changed: No Firmware changed: No ID: 440985 Support for HW-Variant 4 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(104), 1\42893_3.fw(104), 1\42893_4.fw(104) Version 1.6.2.0: ID: 319005 Module bootup timeout configured Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 320770 Accelerated firmware update. Allows reliable firmware update behind CANIO bus controllers. Channel description changed:No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(9), 1\42893_3.fw(9) Version 1.6.1.0: ID: 301465 Support for HW-Variant 3 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(8), 1\42893_3.fw(8) Version 1.6.0.0: ID: 284835 / Support ID: 400084530 Encoder position should be displayed at PosVal03, if SDC information is setto "on" Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(8) Version 1.5.3.0: ID: 296380 / Support ID: 400087355 80SD100XD.C04X-13: Erroneous Detection of Short Circuit between Motor-Phaseand Ground Due to a Firmware-Error the activation of the Controller could be blockedunder certain circumstances because of a wrongly assumed Short Circuit to Ground Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(8) Version 1.5.2.0: ID: 290315 / Support ID: 400082483 Inrare cases ACOPOSmicro generated an erroneous status indication (UZKStatus = not OK). Also high motor currents in conjunction with tolerances of electronic components could lead to module internal disturbances which in consequence could generate error messages. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(7) Version 1.5.1.0: ID: 272375 /Support ID: 400049998 Module in undefined state, if no trigger happens in mode -121 (Remaining distance mode) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 272380 / Support ID: 400051695 The ACOPOSMicro doesn't switch in switched on with a customer motor at rampmode Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 272385 Ramp mode: Wrong configuratin for referencing speed is possible Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(6) Version 1.4.0.2: ID: 251830 / Support ID: 400056193 Special character were deleted in channel description Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(5) Version 1.4.0.1: ID: 243230 Customer-specific expansion of hardware description file This upgrade has no impact on the Automation Studio and the standard version of the FieldbusDESIGNER Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(5) Version 1.1.0.0: ID: 205515 Buscontroller support for the module 80SD100XD.C04X-13 Channel description changed: Yes Configuration description changed: Yes Firmware changed:Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(3) |
|||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.0.0.0 | * | 09/12/2019 | 1 MB | EXE | AS4_HW_80SD100XD.C04X-13.exe | |
| Descrizione |
V4.0 HW Upgrade (80SD100XD.C04X-13) Revision information 80SD100XD.C04X-13 Version 2.0.0.0: ID: 671645 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(106), 1\42893_3.fw(106), 1\42893_4.fw(106), 1\42893_5.fw(106) Version 1.9.0.1: ID: 474775 Motion Wizzard revised In AS 4.x, the aged library "AsString" won’t be added to a AS project anymore. The "AsBrStr" will be used by the Motion instead. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(106), 1\42893_3.fw(106), 1\42893_4.fw(106), 1\42893_5.fw(106) Version 1.9.0.0: ID: 474120 Errorcorrection in order to guard motor outputs against short to ground Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(106), 1\42893_3.fw(106), 1\42893_4.fw(106), 1\42893_5.fw(106) Version 1.8.0.0: ID: 400820 Cycle time of MPGen edjustable Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 400875 Function model Ramp: new mode Mode -120: Set home position Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 400975 Corrected aproblem in HWX file Channel description changed: No Configuration description changed: No Firmware changed: No ID: 440975 / SupportID: 400133806 Corrected HWC entry Channel description changed: No Configuration description changed: No Firmware changed: No ID: 440985 Support for HW-Variant 4 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(104), 1\42893_3.fw(104), 1\42893_4.fw(104) Version 1.6.2.0: ID: 319005 Module bootup timeout configured Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 320770 Accelerated firmware update. Allows reliable firmware update behind CANIO bus controllers. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(9), 1\42893_3.fw(9) Version 1.6.1.0: ID: 301465 Support for HW-Variant 3 Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(8), 1\42893_3.fw(8) Version 1.6.0.0: ID: 284835 / Support ID: 400084530 Encoder position should be displayed at PosVal03, if SDCinformation is set to "on" Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(8) Version 1.5.3.0: ID: 296380 / Support ID: 400087355 80SD100XD.C04X-13: Erroneous Detection of Short Circuitbetween Motor-Phase and Ground Due to a Firmware-Error the activation ofthe Controller could be blocked under certain circumstances because of a wrongly assumed Short Circuit to Ground Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(8) Version 1.5.2.0: ID: 290315/ Support ID: 400082483 In rare cases ACOPOSmicro generated an erroneousstatus indication (UZKStatus = not OK). Also high motor currents in conjunction with tolerances of electronic components could lead to module internaldisturbances which in consequence could generate error messages. Channeldescription changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(7) Version 1.5.1.0: ID: 272375 / Support ID: 400049998 Module in undefined state, if no trigger happens in mode -121 (Remaining distance mode) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 272380 / Support ID: 400051695 The ACOPOSMicro doesn't switch in switched on with a customer motor at rampmode Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 272385 Ramp mode: Wrong configuratinfor referencing speed is possible Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware:1\42882_1.fw(2), 1\42893_2.fw(6) Version 1.4.0.2: ID: 251830 / Support ID: 400056193 Special character were deleted in channel description Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(5) Version 1.4.0.1: ID: 243230 Customer-specific expansion of hardware description file This upgrade has no impact on the Automation Studio and the standard version of the FieldbusDESIGNER Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(5) Version 1.1.0.0: ID: 205515 Buscontroller support for the module 80SD100XD.C04X-13 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(3) |
|||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 1.9.0.1 | * | 14/06/2016 | 1 MB | EXE | AS4_HW_80SD100XD.C04X-13.exe | |
| Descrizione |
V4.0 HW Upgrade (80SD100XD.C04X-13) Revision information 80SD100XD.C04X-13 Version 1.9.0.1: ID: 474775 Motion Wizzard revised In AS 4.x, the aged library "AsString" won’t be added to a AS project anymore. The "AsBrStr" will be used by the Motion instead. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(106), 1\42893_3.fw(106), 1\42893_4.fw(106), 1\42893_5.fw(106) Version 1.9.0.0: ID: 474120 Error correction in order to guard motor outputs against short to ground Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(106), 1\42893_3.fw(106), 1\42893_4.fw(106), 1\42893_5.fw(106) Version 1.8.0.0: ID: 400820 Cycle time of MPGen edjustable Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 400875 Function model Ramp: new mode Mode -120: Set home position Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 400975 Corrected a problem in HWX file Channel description changed: No Configuration description changed: No Firmware changed: No ID: 440975 / Support ID: 400133806 Corrected HWC entry Channel description changed: No Configuration description changed: No Firmware changed: No ID: 440985 Support for HW-Variant 4 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(104), 1\42893_3.fw(104), 1\42893_4.fw(104) Version 1.6.2.0: ID: 319005 Module bootup timeout configured Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 320770 Accelerated firmware update. Allows reliable firmware update behind CANIO bus controllers. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(9), 1\42893_3.fw(9) Version 1.6.1.0: ID: 301465 Support for HW-Variant 3 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(8), 1\42893_3.fw(8) Version 1.6.0.0: ID: 284835 / Support ID: 400084530 Encoder position should be displayed at PosVal03, if SDC information is setto "on" Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(8) Version 1.5.3.0: ID: 296380 / Support ID: 400087355 80SD100XD.C04X-13: Erroneous Detection of Short Circuit between Motor-Phaseand Ground Due to a Firmware-Error the activation of the Controller could be blocked under certain circumstances because of a wrongly assumed Short Circuit to Ground Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(8) Version 1.5.2.0: ID: 290315 / Support ID: 400082483 In rare cases ACOPOSmicro generated an erroneous status indication (UZKStatus = not OK). Also high motor currents in conjunction with tolerances of electronic components could lead to module internal disturbances which in consequence could generate error messages. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(7) Version 1.5.1.0: ID: 272375 / Support ID: 400049998 Module in undefined state, if no trigger happens in mode -121 (Remaining distance mode) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 272380 / Support ID: 400051695 The ACOPOSMicro doesn't switch in switched on with a customer motor at rampmode Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 272385 Ramp mode: Wrong configuratin for referencing speed is possible Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(6) Version 1.4.0.2: ID: 251830 / Support ID: 400056193 Special character were deleted in channel description Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(5) Version 1.4.0.1: ID: 243230 Customer-specific expansion of hardware description file This upgrade has no impact on the Automation Studio and the standard version of the FieldbusDESIGNER Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\42882_1.fw(2), 1\42893_2.fw(5) Version 1.1.0.0: ID: 205515 Buscontroller support for the module 80SD100XD.C04X-13 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\42882_1.fw(2), 1\42893_2.fw(3) |
|||||
