DWL@DWL10000049393
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
|---|---|---|---|---|---|---|
| 2.5.3.28 SP09 | DE | WinXP+SP2 | 07/05/2008 | 348 MB | EXE | AS2530028.SP09_SrvPack_Ger.exe |
| 2.5.3.28 SP09 | EN | WinXP+SP2 | 07/05/2008 | 376 MB | EXE | AS2530028.SP09_SrvPack_Eng.exe |
| Descrizione | Automation Studio Service Pack V2.5.3 | |||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.5.3.28 SP08 | DE | WinXP+SP2 | 04/04/2008 | 363 MB | EXE | AS2530028.SP08_SrvPack_Ger.exe |
| 2.5.3.28 SP08 | EN | WinXP+SP2 | 04/04/2008 | 391 MB | EXE | AS2530028.SP08_SrvPack_Eng.exe |
| Descrizione | Automation Studio Service Pack V2.5.3 | |||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.5.3.28 SP07 | DE | WinXP+SP2 | 29/01/2008 | 347 MB | EXE | AS2530028.SP07_SrvPack_Ger.exe |
| 2.5.3.28 SP07 | EN | WinXP+SP2 | 29/01/2008 | 374 MB | EXE | AS2530028.SP07_SrvPack_Eng.exe |
| Descrizione | Automation Studio Service Pack V2.5.3 | |||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.5.3.28 SP06 | DE | WinXP+SP2 | 10/12/2007 | 346 MB | EXE | AS2530028.SP06_SrvPack_Ger.exe |
| 2.5.3.28 SP06 | EN | WinXP+SP2 | 10/12/2007 | 373 MB | EXE | AS2530028.SP06_SrvPack_Eng.exe |
| Descrizione | Automation Studio Service Pack V2.5.3 | |||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.5.3.28 SP05 | DE | WinXP+SP2 | 03/10/2007 | 330 MB | EXE | AS2530028.SP05_SrvPack_Ger.exe |
| 2.5.3.28 SP05 | EN | WinXP+SP2 | 03/10/2007 | 324 MB | EXE | AS2530028.SP05_SrvPack_Eng.exe |
| Descrizione | Automation Studio Service Pack V2.5.3 | |||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.5.3.28 SP04 | DE | WinXP+SP2 | 27/08/2007 | 308 MB | EXE | AS2530028.SP04_SrvPack_Ger.exe |
| 2.5.3.28 SP04 | EN | WinXP+SP2 | 27/08/2007 | 302 MB | EXE | AS2530028.SP04_SrvPack_Eng.exe |
| Descrizione | Automation Studio Service Pack V2.5.3 | |||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.5.3.28 SP03 | DE | WinXP+SP2 | 31/07/2007 | 287 MB | EXE | AS2530028.SP03_SrvPack_Ger.exe |
| 2.5.3.28 SP03 | EN | WinXP+SP2 | 31/07/2007 | 282 MB | EXE | AS2530028.SP03_SrvPack_Eng.exe |
| Descrizione |
Automation Studio Service Pack V2.5.3 Libraries (ID#159973) VA_CopyScreenToMem and VA_CopyMemToScreen copy the wrong area of the monitor. SG4 - Common (ID#160695) Visapi text output does not work in the top area of a display that has been turned 90° When the error occurs, only the background is shown, the text itself is not output. The error affects the functions VA_TextOut and VA_wcTextOut. SG4 Runtime - Keyhandling (ID#160658) Adding a VNC server causes the hardware keys in the key matrix to be mapped starting at offset 128. Without the VNC server the hardware keys start at offset 0. SG4 Runtime - TerminalMode (ID#134328) Very slow page change on terminal target If status data points are appended to the controls in the runtime settings, then this has a major influence on the speed it takes to change pages. The more status data points appended, the longer it takes to change a page. AR - Firmware (ID#160215) EPL manager 1: New firmware In "Controlled Node" mode, the following errors may occur: - With heavy asynchronous loads, asynchronous TX packets may be lost. - Collisions on the network can cause the station to stop receiving Ethernet packets. AR - USB Support (ID#156565) No error status with unplugged printer If the USB cable will be disconnected from the printer, no appropriate error message will be generated. IO System - General (ID#160260) StaleData is set sporadically when Powerlink interface is used as system timer Due to a synchronization problem, StaleData is set sporadically when Powerlink interface is used as system timer. IO System - Powerlink (ID#152217) IF modules are no longer detected correctly on the X20BC1083 if they have been disabled in AS but are still physically present to prevent this problem, the IF module must be physically removed and the system restarted. The IF module can then be replaced. |
|||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.5.3.28 SP02 | DE | 13/07/2007 | 300 MB | EXE | AS2530028.SP02_SrvPack_Ger.exe | |
| 2.5.3.28 SP02 | EN | 13/07/2007 | 295 MB | EXE | AS2530028.SP02_SrvPack_Eng.exe | |
| Descrizione |
Automation Studio Service Pack V2.5.3 Device Support (ID#157005) Impossible to insert ARNC0 security on PP400 Workspace - I/O assignment (ID#157205) Variables deleted or moved when inserting modules on the BC0073 If a digital X20 module is inserted into an existing X20 rack, it's possible that the I/O mapping for the subsequent modules is lost. However, this behavior only occurs on SG3 projects. Motion Components (ID#156490) Sporadic AS crash when opening NC Trace or NC Test If no INIT parameter module was entered in the NC deployment table, then AS crashed when opening NC Trace or NC Test. Motion Components (ID#155890) AS crash when starting a trace when using an SG3 PLC AS crashed when starting a trace in NC Trace or NC Test when using an SG3 platform. Loading multi-axis trace data from SG3 platforms was not possible. Motion Components (ID#155895) Could not execute multi-axis trace on ACOPOSmulti Starting, carrying out, or loading a multi-axis trace job in NC Trace for an NC object for the ACOPOSmulti was faulty. AR - Firmware (ID#156775) 0AC182.1-KEB: New firmware Error when reading the serial number corrected (low word was incorrect). AR - General SG4 (ID#156755) Logger entries from the Ethernet driver If the baud rate of the Ethernet interface is not set to "automatic", it can cause problems on the following targets: AR106, AR105, and PP400. AR - General SG4 (ID#147610) VC not starting at a certain start page The display is completely black after initialization and VC doesn't respond. AR - SLIP/PPP (ID#155180 FTP transfer via PPP aborting for large files after a certain time If an FTP connection is established over PPP, which is then used used to load modules to the controller, then modules can be loaded to the controller from the PC with no problems. However, it is not possible to load modules from the controller to the PC. AR - USB Support (ID#155085) DirInfo incorrectly reading directories on a USB flash drive. On USB devices no file devices work with an additional folder specification (e.g. IF7.ST1/format). |
|||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.5.3.27 SP01 | DE | 22/05/2007 | 222 MB | EXE | AS2530027.SP01_SrvPack_Ger.exe | |
| 2.5.3.27 SP01 | EN | 22/05/2007 | 222 MB | EXE | AS2530027.SP01_SrvPack_Eng.exe | |
| Descrizione |
Automation Studio Service Pack V2.5.3 Device Support (ID#157005) Impossible to insert ARNC0 security on PP400 Workspace - I/O assignment (ID#157205) Variables deleted or moved when inserting modules on the BC0073 If a digital X20 module is inserted into an existing X20 rack, it's possible that the I/O mapping for the subsequent modules is lost. However, this behavior only occurs on SG3 projects. Motion Components (ID#156490) Sporadic AS crash when opening NC Trace or NC Test If no INIT parameter module was entered in the NC deployment table, then AS crashed when opening NC Trace or NC Test. Motion Components (ID#155890) AS crash when starting a trace when using an SG3 PLC AS crashed when starting a trace in NC Trace or NC Test when using an SG3 platform. Loading multi-axis trace data from SG3 platforms was not possible. Motion Components (ID#155895) Could not execute multi-axis trace on ACOPOSmulti Starting, carrying out, or loading a multi-axis trace job in NC Trace for an NC object for the ACOPOSmulti was faulty. AR - Firmware (ID#156775) 0AC182.1-KEB: New firmware Error when reading the serial number corrected (low word was incorrect). AR - General SG4 (ID#156755) Logger entries from the Ethernet driver If the baud rate of the Ethernet interface is not set to "automatic", it can cause problems on the following targets: AR106, AR105, and PP400. AR - General SG4 (ID#147610) VC not starting at a certain start page The display is completely black after initialization and VC doesn't respond. AR - SLIP/PPP (ID#155180 FTP transfer via PPP aborting for large files after a certain time If an FTP connection is established over PPP, which is then used used to load modules to the controller, then modules can be loaded to the controller from the PC with no problems. However, it is not possible to load modules from the controller to the PC. AR - USB Support (ID#155085) DirInfo incorrectly reading directories on a USB flash drive. On USB devices no file devices work with an additional folder specification (e.g. IF7.ST1/format). |
|||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.5.3.26 SP02 | DE | 27/04/2007 | 222 MB | EXE | AS2530026SP02_SrvPack_Ger.exe | |
| 2.5.3.26 SP02 | EN | 27/04/2007 | 222 MB | EXE | AS2530026SP02_SrvPack_Eng.exe | |
| Descrizione | Automation Studio Service Pack V2.5.3 | |||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 2.5.3.25 SP01 | DE | 22/03/2007 | 20 MB | EXE | AS2530025SP01_SrvPack_Ger.exe | |
| 2.5.3.25 SP01 | EN | 22/03/2007 | 20 MB | EXE | AS2530025SP01_SrvPack_Eng.exe | |
| Descrizione | Automation Studio Service Pack V2.5.3 | |||||
