X20DIF372

Short description

I/O module	16 digital inputs 24 VDC for 1-wire connections

General information

B&R ID code	0x292B
Status indicators	I/O function per channel, operating state, module status
Diagnostics
Module run/error	Yes, using LED status indicator and software
Power consumption
Bus	0.14 W
Internal I/O	1.4 W
Additional power dissipation caused by actuators (resistive) [W]	-
Certifications
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
UL	cULus E115267 Industrial control equipment

Digital inputs

Nominal voltage	24 VDC
Input characteristics per EN 61131-2	Type 1
Input voltage	24 VDC -15% / +20%
Input current at 24 VDC	Typ. 2.68 mA
Input circuit	Source
Input filter
Hardware	≤100 μs
Software	Default 1 ms, configurable between 0 and 25 ms in 0.2 ms increments
Connection type	1-wire connections
Input resistance	Typ. 8.9 kΩ
Simultaneity
With 24 V I/O power supply	100% (16 channels)
With 28.8 V I/O power supply	75% (12 channels)
Switching threshold
Low	<5 VDC
High	>15 VDC
Insulation voltage between channel and bus	500 V_eff

Electrical properties

Electrical isolation	Channel isolated from bus Channel not isolated from channel

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	See section "Derating".
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x terminal block X20TB1F separately. Order 1x bus module X20BM11 separately.
Pitch	12.5^+0.2 mm

Référence produit:

X20DIF372

Description:

16 digital inputs
Source circuit
1-wire connections
Configurable software input filter for entire module

The module is equipped with 16 inputs for 1-wire connections. The module is designed for a source input circuit.

Accessoires obligatoires

Bus modules

X20BM11	X20 bus module, 24 VDC keyed, internal I/O power supply connected through
X20BM15	X20 bus module, with node number switch, 24 VDC keyed, internal I/O power supply connected through

Terminal blocks

X20TB1F	X20 terminal block, 16-pin, 24 VDC keyed

Automation Studio HW Upgrades	Version (date)	Téléchargement
V4.0 HW Upgrade (X20DIF372)		EXE / 1 Mo Identification pour téléchargement

Certifications	Version (date)	Téléchargement
E115267 UL Certificate of Compliance X20		PDF / 2 Mo Identification pour téléchargement
EU Data Act - X20 IO - Connected Product Information Notice		PDF / 92 Ko Identification pour téléchargement
EU Declaration ATEX X20		PDF / 218 Ko Identification pour téléchargement
EU Declaration of conformity PLC X20		PDF / 169 Ko Identification pour téléchargement
UK Declaration PLC X20		PDF / 151 Ko Identification pour téléchargement

Documentation	Version (date)	Téléchargement
Data sheet X20DIF372		PDF / 915 Ko Identification pour téléchargement
X20 System User´s Manual		PDF / 49 Mo Identification pour téléchargement

E-CAD (modèles Electro ou EPLAN)	Version (date)	Téléchargement
Makro-/Artikeldaten 4.0.3 (X20DIF372)		EXE / 790 Ko Identification pour téléchargement
X20 EPLAN P8 from V2.4		EXE / 160 Mo Identification pour téléchargement