Short description
| Communication module | 1x RS485/RS422 |
General information
| B&R ID code | 0x1F28 |
| Status indicators | Module status, data transfer |
| Diagnostics | |
| Module status | Yes, using LED status indicator |
| Data transfer | Yes, using LED status indicator |
| Power consumption | 0.42 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| Certifications | |
| CE | Yes |
| UKCA | Yes |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL |
cULus E115267 Industrial control equipment |
| HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV |
Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV |
EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
| EAC | Yes |
| KC | Yes |
Interfaces
| Interface IF1 | |
| Signal | RS485/RS422 |
| Variant | 9-pin female DSUB connector |
| Max. distance | 1200 m |
| Transfer rate | Max. 115.2 kbit/s |
| FIFO buffer | 16 bytes in the transmit and receive directions |
| Terminating resistor | External using T-connector (0G1000.00-090) |
| Controller | UART type 16C550 compatible |
Electrical properties
| Electrical isolation | PLC isolated from RS485/RS422 (IF1) |
Operating conditions
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | - |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Slot | In the X20 PLC |
Référence produit:
X20IF1030Description:
- RS485/RS422 connection
The interface module can be used to expand the X20 CPU for specific applications. It is equipped with an RS485/RS422 interface.
Accessoires optionnels
Infrastructure components
| 0G1000.00-090 | Bus connector, RS485, for PROFIBUS networks |
| Automation Studio HW Upgrades | Version (date) | Téléchargement |
|---|---|---|
| V2.7 HW Upgrade (X20IF1030) | EXE / 484 Ko | |
| V3.0 HW Upgrade (X20IF1030) | EXE / 484 Ko | |
| V4.0 HW Upgrade (X20IF1030) | EXE / 786 Ko |
| Documentation | Version (date) | Téléchargement |
|---|---|---|
| Data sheet X20(c)IF1030 | PDF / 141 Ko | |
| Installation- / EMC-Guide | PDF / 20 Mo | |
| X20 System User´s Manual | PDF / 7 Mo |
| E-CAD (modèles Electro ou EPLAN) | Version (date) | Téléchargement |
|---|---|---|
| X20 EPLAN P8 from V2.4 | EXE / 160 Mo |
| M-CAD (modèles mécaniques) | Version (date) | Téléchargement |
|---|---|---|
| 3D File DXF/STEP X20 Interface module X20IF1020, 1030 | ZIP / 1 Mo |