Short description
Communication module | 1x RS232 |
General information
B&R ID code | 0xE7F2 |
Status indicators | Data transfer, operating state, module status |
Diagnostics | |
Module run/error | Yes, using LED status indicator and software |
Data transfer | Yes, using LED status indicator |
Power consumption | |
Bus | 0.01 W |
Internal I/O | 1.44 W |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
UL |
cULus E115267 Industrial control equipment |
HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
DNV |
Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
LR | ENV1 |
KR | Yes |
ABS | Yes |
BV |
EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
EAC | Yes |
Interfaces
Interface IF1 | |
Signal | RS232 |
Variant | Connection via 12-pin terminal block X20TB12 |
Max. distance | 900 m |
Transfer rate | Max. 115.2 kbit/s |
FIFO buffer | 1 kB |
Handshake lines | RTS, CTS |
Controller | UART type 16C550 compatible |
Electrical properties
Electrical isolation |
RS232 (IF1) isolated from bus RS232 (IF1) not isolated from I/O power supply
|
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | See section "Derating". |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | Up to 100%, condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Note |
Order 1x terminal block X20TB06 or X20TB12 separately. Order 1x bus module X20cBM11 separately. |
Pitch | 12.5+0.2 mm |
Référence produit:
X20cCS1020Description:
- RS232 interface for serial, remote connection of complex devices to the X20 system
In addition to the standard I/O, complex devices often need to be connected. The X20CS communication modules are intended precisely for cases like this. As normal X20 electronics modules, they can be placed anywhere on the remote backplane.
Accessoires obligatoires
Automation Studio HW Upgrades | Version (date) | Téléchargement |
---|---|---|
V3.0 HW Upgrade (X20cCS1020) | EXE / 4 Mo | |
V4.0 HW Upgrade (X20cCS1020) | EXE / 2 Mo |
Documentation | Version (date) | Téléchargement |
---|---|---|
Coated modules | PDF / 62 Ko | |
Datasheet X20(c)CS1020 | PDF / 803 Ko | |
Installation- / EMC-Guide | PDF / 20 Mo | |
X20 System User´s Manual | PDF / 7 Mo |
E-CAD (modèles Electro ou EPLAN) | Version (date) | Téléchargement |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 Mo |
M-CAD (modèles mécaniques) | Version (date) | Téléchargement |
---|---|---|
3D File DXF/STEP X20 Electronic module | ZIP / 10 Ko | |
3D File STEP X20 I/O-Slice | ZIP / 872 Ko | |
Dimensions PDF X20 Electronic module | PDF / 3 Ko |