General information
| Short description | ACOPOS P3 shield component set: 1x ACOPOS P3 shield mounting plate 1x, 2x M3x6 screws |
| Certifications | |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Not applicable |
Mechanical properties
| Dimensions | |
| Width | 57.5 mm |
| Height | 108.6 mm |
| Depth | 102 mm |
| Weight | 85 g |
Número de material:
8SCSE01.0100-00Descripción:
Shield component set 8SCSE01.0100-00 is installed on the underside of ACOPOS P3 8EI servo drives with a width of 66 mm and consists of a shield mounting plate on which shield connection clamps for device-side shielding of DC bus and brake resistor cables can be installed.
ACOPOS P3 shield component set: 1x ACOPOS P3 shield mounting plate, 1x 2x M3x6 screws| Certificados | Versión (fecha) | Descargar |
|---|---|---|
| EU Declaration Servos ACOPOSmulti | PDF / 219 KB | |
| UK Declaration Servos ACOPOSmulti | PDF / 109 KB | |
| UK Declaration Servos ACOPOSmulti_8BVx1650Hxxx.000_8BVx1650Hxxx.004 | PDF / 110 KB |
| Documentación | Versión (fecha) | Descargar |
|---|---|---|
| Datasheet 8SCSE01.0100-00 | PDF / 6 MB |
| M-CAD (plantillas mecánicas) | Versión (fecha) | Descargar |
|---|---|---|
| 3D file STEP 8SCSE01.0100-00 | ZIP / 31 KB |