General information
Controller
| Bootloader | BIOS AMI |
| Power failure logic | |
| Controller | MTCX |
| Buffer time | 10 ms |
| Graphics | |
| Controller | Depends on the component |
| SRAM | |
| Size | - |
| Battery-backed | - |
Display
Interfaces
| COM1 | |
| Type | RS232, modem capable |
| Variant | 9-pin male DSUB connector |
| UART | 16550-compatible, 16-byte FIFO |
| Max. baud rate | 115 kbit/s |
| CompactFlash slot 1 | |
| Type | Type I |
| USB | |
| Quantity | 3 (2x back, 1x side) |
| Type | USB 2.0 |
| Variant | Type A |
| Transfer rate | Low speed (1.5 Mbit/s), full speed (12 Mbit/s), high speed (480 Mbit/s) |
| Ethernet | |
| Quantity | 2 |
| Transfer rate | 10/100 Mbit/s |
| Max. baud rate | 100 Mbit/s |
| Add-on interface slot | |
| Quantity | 1 |
Electrical properties
| Nominal voltage | 24 VDC ±25% |
| Nominal current | 1.4 A |
| Inrush current | Typ. 10 A, max. 40 A for <300 μs |
| Power consumption | 28.5 W |
| Galvanic isolation | Yes |
Operating conditions
| Degree of protection per EN 60529 | All sides: IP65 (only with closed housing) |
Ambient conditions
| Temperature | |
| Operation | 0 to 50°C |
| Storage | -20 to 60°C |
| Transport | -20 to 60°C |
| Relative humidity | |
| Operation |
T ≤ 40°C: 5 to 90%, non-condensing T > 40°C: <90%, non-condensing |
| Storage |
T ≤ 40°C: 5 to 90%, non-condensing T > 40°C: <90%, non-condensing |
| Transport |
T ≤ 40°C: 5 to 90%, non-condensing T > 40°C: <90%, non-condensing |
| Vibration | |
| Operation | 2 to 9 Hz: 3 mm amplitude / 9 to 200 Hz: 1 g |
| Storage | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g |
| Transport | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g |
| Shock | |
| Operation | 15 g, 11 ms |
| Storage | 30 g, 6 ms |
| Transport | 30 g, 6 ms |
Mechanical properties
Material number:
5PC725.1505-00Description:
- 15" TFT XGA color display
- Analog resistive touch screen
- IP65 protection
- Fan-free operation
- Flange output on top for mounting on a support arm system
Mandatory Accessories
Accessories
CPU boards
| 5PC600.X945-00 | CPU board Intel Atom, 1600 MHz, 533 MHz FSB, 512 kB L2 cache; 945GME chipset; 1 slot for SO-DIMM DDR2 RAM module |
Flanges
| 5AC725.FLGC-00 | Flange coupling - Rittal - For PPC725 - For AP5000 |
Undefined
| 5MMDDR.0512-01 | SO-DIMM DDR2 RAM 512 MB PC2-5300 |
| 5MMDDR.1024-01 | SO-DIMM DDR2 RAM 1024 MB PC2-5300 |
| 5MMDDR.2048-01 | SO-DIMM DDR2 RAM 2048 MB PC2-5300 |
Optional Accessories
Drives
| 5AC600.CFSI-00 | CompactFlash slot (add-on) for installation in an APC620 or Panel PC |
| 5AC600.HDDI-05 | 40 GB hard disk (add-on) 24/7 operation with extended temperature range. For APC620 and PPC700. Note: Please see the manual for information about using this hard disk. |
| 5AC600.HDDI-06 | 80 GB Hard Disk (add-on) 24/7 hard disk with extended temperature range. For APC620 and PPC700. Remark: Please see manual for proper use of the hard disk. |
| 5AC600.SSDI-00 | 128 GB PATA SSD (MLC), add-on; for APC620 and PPC700. Note: Please see the manual for information about using this SSD. |
| Documentation | Version (Date) | Download |
|---|---|---|
| Panel PC 725 User's Manual | PDF / 7 MB |
| E-CAD (Electro or EPLAN Templates) | Version (Date) | Download |
|---|---|---|
| APC EPLAN P8 from V2.4 | EXE / 38 MB |
| Firmware Upgrades | Version (Date) | Download |
|---|---|---|
| APC620/PPC700 Firmware Upgrade (MTCX, SDLT, SDLR, UPS) | ZIP / 439 KB |
| M-CAD (Mechan. Templates) | Version (Date) | Download |
|---|---|---|
| 3D file DXF/STEP 5PC725.1505-00 | ZIP / 1 MB |
