5CAMPC.0020-00

General information
Certifications
CE Yes
UKCA Yes
Cable construction
Type Crossover
Supply lines
Conductor resistance ≤30 Ω/km
Material Tinned copper stranded wire
Permissible operating voltage 30 VDC
Outer jacket
Material Silicone- and halogen-free, flame-retardant PUR outer jacket
Color Similar to RAL 7012
Cable elements
Control devices Direct connection between control devices and monitoring device (6 wires)
CAN 2 pairs with shielding (5 wires)
Network Twisted pair cable for Ethernet (10/100 Mbit/s) (4 wires, male RJ45 connector)
Serial 3 wires
Power supply Supply voltage +24 VDC and ground (3 wires)
Enable switch Direct connection between enable switch and monitoring device (6 wires)
Connector
Type Connection housing with female insert
Operating conditions
Shield attenuation Per IEC 60096-1, Amendment 2
Flame-retardant Per IEC 60332-1 and VW1 / FT1 in accordance with C-UL
Oil and hydrolysis resistance Per VDE 0282-10
Ambient conditions
Temperature
Moving -5 to 60°C
Static -20 to 80°C
Mechanical properties
Dimensions
Length 2 m ±0.05 m
Diameter 10 mm
Bend radius Min. 60 mm
Weight 153 g/m
Tension Max. 140 N
Número de material:
5CAMPC.0020-00
Descripción:

The crossover switching cabinet cable is required for the wiring inside the switching cabinet.
The pin assignments for the Ethernet plug (crossover) make it possible to connect directly to a B&R controller e.g. X20 or to the first Ethernet connection (MDIX) on the B&R Ethernet Hub AC808.

Documentación Versión (fecha) Descargar
Mobile Panel 100/200 User's Manual PDF / 14 MB

Seleccione país e idioma

B&R Logo