3DO750.6

Short description
I/O module 8 digital outputs 24 VDC / 230 VAC in 2 groups
General information
Status indicators I/O function per channel
Diagnostics
Outputs Yes, using LED status indicator
Power consumption
24 VDC 2.3 W
5 VDC 0.7 W
Total 3.0 W
Electrical isolation
Group - Group Yes / Max. 430 VAC
Channel - Channel No (same group)
Channel - PLC Yes / Max. 250 VAC
Certifications
CE Yes
UKCA Yes
UL cULus E115267
Industrial control equipment
EAC Yes
Digital outputs
Variant Relay / Normally open contact
Nominal voltage 24 VDC to 230 VAC
Rated frequency DC / 45 to 63 Hz
Nominal output current 3.0 A
Total nominal current 16.0 A
Group rated voltage 8.0 A
Switching frequency Max. 10 Hz at nominal load
Sensor power supply External
Switching capacity
Minimum 10 mA to 5 VDC
Maximum 500 VA up to 150 W
Operating conditions
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation 0 to 60°C
Storage -25 to 70°C
Relative humidity
Operation 5 to 95%
Mechanical properties
Note Order 1x terminal block TB170 separately.
Dimensions
Width System 2005 single-width
Can be installed on
Base unit Yes
Expansion unit Yes
Número de material:
3DO750.6
Descripción:
2005 digital output module, 8 relay outputs 230 VAC / 24 VDC, 3 A, 2 electrically isolated output groups, order 1x terminal block TB170 separately!
Accesorios obligatorios
Terminal blocks
3TB170.9 2005 terminal block, 20-pin, screw clamp terminal block
3TB170.91 2005 terminal block, 20-pin, push-in terminal block
Documentación Versión (fecha) Descargar
Datasheet 3DO750.6 PDF / 296 KB

Seleccione país e idioma

B&R Logo