3AM374.6

Short description

I/O module	4 analog inputs in 2 groups, 4 analog outputs in 2 groups

General information

Status indicators	Module configuration/converter function, start pulse for software clocking, voltage/current input per group, voltage/current output per group
Diagnostics
Module status	Yes, using software
Module configuration	Yes, using LED status indicator and software
Converter	Yes, using LED status indicator
Power consumption
24 VDC	5.0 W
5 VDC	1.5 W
Total	6.5 W
Electrical isolation
Channel - Channel	No
Channel - PLC	Yes
Certifications
CE	Yes
UL	cULus E115267 Industrial control equipment

Analog inputs

Input type	Differential input
Digital converter resolution	12-bit
Conversion time	<1 ms for inputs and outputs <1.5 ms with enabled averaging
Output format	INT
Input impedance in signal range	2 MΩ
Load	50 Ω
Input protection	Protection against wiring with supply voltage
Operating modes	Cyclic measurement with optional averaging, direct software timing, software timing with time specification (2 - 65.535 ms)
Basic accuracy	±0.1% at 25°C
Input
Voltage	0 to 10 V
Current	0 to 20 mA

Analog outputs

Digital converter resolution	12-bit
Conversion time	<1 ms for inputs and outputs <1.5 ms with enabled averaging
Switch on/off behavior	Internal enable relay for startup and errors
Output protection	Short-circuit proof
Operating modes	Cyclic measurement with optional averaging, direct software timing, software timing with time specification (2 - 65.535 ms)
Output
Voltage	±10 V
Current	0 to 20 mA
Basic accuracy
Voltage	±0.3% at 25°C
Current	±0.15% at 25°C

Operating conditions

Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation	0 to 60°C
Storage	-25 to 70°C
Relative humidity
Operation	5 to 95%

Mechanical properties

Note	Order 1x terminal block TB170 separately.
Dimensions
Width	System 2005 single-width
Can be installed on
Base unit	Yes
Expansion unit	Yes

Número de material:

3AM374.6

Descripción:

2005 analog mixed module, 4 inputs, 0-10 V / 0 to 20 mA, 12-bit, 4 outputs, ±10 V / 0 to 20 mA, 12-bit, signals switchable in groups of 2, order 1x terminal block TB170 separately!

Accesorios obligatorios

Terminal blocks

3TB170.9	2005 terminal block, 20-pin, screw clamp terminal block
3TB170.91	2005 terminal block, 20-pin, push-in terminal block

Actualizaciones de hardware de Automation Studio	Versión (fecha)	Descargar
V2.6 HW Upgrade (3AM374.6)		EXE / 399 KB Para descargar se debe iniciar sesión
V3.0 HW Upgrade (3AM374.6)		EXE / 399 KB Para descargar se debe iniciar sesión

Documentación	Versión (fecha)	Descargar
Datasheet 3AM374.6		PDF / 547 KB Para descargar se debe iniciar sesión