Short description
I/O module 8 digital outputs 24 VDC
General information
B&R ID code 0x1467
Status indicators I/O function per channel, supply voltage, bus function
Diagnostics
Outputs Yes, using LED status indicator and software
I/O power supply Yes, using LED status indicator
Connection type
X2X Link M12, B-coded
Outputs 8x M8, 3-pin
I/O power supply M8, 4-pin
Power consumption
Internal I/O 2 W
X2X Link power supply 0.75 W
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA IIA T5 Gc
IP67, Ta = 0 - Max. 60°C
TÜV 05 ATEX 7201X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
EAC Yes
KC Yes
I/O power supply
Nominal voltage 24 VDC
Voltage range 18 to 30 VDC
Integrated protection Reverse polarity protection
Power consumption
Actuator power supply Max. 12 W
Digital outputs
Quantity 8
Variant Current-sourcing FET
Nominal voltage 24 VDC
Switching voltage I/O power supply minus residual voltage
Nominal output current 2 A
Total nominal current 8 A
Output circuit Source
Output protection Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply
Actuator power supply 0.5 A summation current
Diagnostic status Output monitoring with 10 ms delay
Leakage current when the output is switched off 5 µA
Switching on after overload shutdown Approx. 10 ms (depends on the module temperature)
Group 1 Channels 1 to 4
Group 2 Channels 5 to 8
Residual voltage <0.5 V at 2 A nominal current
Peak short-circuit current <21 A
Switching delay
0 → 1 <250 µs
1 → 0 <270 µs
Switching frequency
Resistive load Max. 100 Hz
Braking voltage when switching off inductive loads 50 VDC
Continuous current per
Output Max. 2 A
Group Max. 4 A (simultaneity factor = 50%)
Module Max. 8 A
Actuator power supply
Voltage I/O power supply minus voltage drop for short-circuit protection
Voltage drop for short-circuit protection at 500 mA Max. 2 VDC
Summation current Max. 0.5 A
Short-circuit proof Yes
Electrical properties
Electrical isolation
Channel isolated from bus

Channel not isolated from channel
Operating conditions
Mounting orientation
Any Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP67
Ambient conditions
Temperature
Operation -25 to 60°C
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Mechanical properties
Dimensions
Width 53 mm
Height 85 mm
Depth 42 mm
Weight 180 g
Torque for connections
M8 Max. 0.4 Nm
M12 Max. 0.6 Nm
Material number:
X67DO1332
Description:
  • 8 A summation current per module
  • All outputs with single-channel diagnostics for short circuit or overload
  • Extremely short cycle times
  • Outputs with short circuit protection
  • Integrated protection for switching inductances

The module is a digital output module for 24 VDC. It is equipped with 8 outputs for a source output circuit.

Automation Studio HW Upgrades Version (Date) Download
V2.6 HW Upgrade (X67DO1332F) EXE / 440 KB
V3.0 HW Upgrade (X67DO1332F) EXE / 439 KB
V4.0 HW Upgrade (X67DO1332) EXE / 553 KB
Certificates Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 149 KB
E115267 UL CoC X67 PDF / 155 KB
Safe cutoff of potential groups PDF / 735 KB
TÜV 05 ATEX 7201 X PDF / 5 MB
X20, X67 KC certificates PDF / 6 MB
Documentation Version (Date) Download
Datasheet X67DO1332 PDF / 364 KB
Installation- / EMC-Guide PDF / 20 MB
X67 System User´s Manual PDF / 6 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X67 EPLAN P8 from V2.4 EXE / 105 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X67 ZIP / 1 MB

Please choose country and language

B&R Logo