Short description
I/O module | 2 analog inputs ±10 V |
General information
Analog inputs
Sensor power supply
Power consumption | 0.75 W per channel |
Nominal voltage | 25 V ±2% |
Nominal output current | Max. 30 mA |
Short-circuit proof | Yes, continuous |
Max. voltage ripple | |
Up to 100 kHz | ≤2.2 mV |
Up to 1 MHz | ≤22 mV |
Higher | ≤100 mV |
Short-circuit current | |
Typical | <50 mA |
Maximum | 60 mA |
Behavior on short circuit | Current limiting |
Electrical properties
Electrical isolation |
Channel isolated from channel and bus Sensor power supply isolated from sensor power supply Sensor power supply not isolated from channel |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Note |
Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
Pitch | 12.5+0.2 mm |
物料号:
X20AI2237描述:
- 2 analog voltage inputs
- Electrically isolated analog channels
- Electrically isolated sensor supplies
- 16-bit digital converter resolution
- Very high sampling rate
- NetTime timestamp: Moment of measurement
The module is equipped with 2 voltage measurement inputs with 16-bit digital converter resolution.
Each voltage input has its own sensor supply. The two channels with their respective sensor supplies are electrically isolated from each other.
必备附件
Automation Studio硬件升级 | 版本(日期) | 下载 |
---|---|---|
V2.7 HW Upgrade (X20AI2237) | EXE / 1 MB | |
V3.0 HW Upgrade (X20AI2237) | EXE / 2 MB | |
V4.0 HW Upgrade (X20AI2237) | EXE / 842 KB |
E-CAD(电子或EPLAN模板) | 版本(日期) | 下载 |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 MB |
M-CAD(机械模板) | 版本(日期) | 下载 |
---|---|---|
3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
Dimensions PDF X20 Electronic module | PDF / 3 KB |
文档 | 版本(日期) | 下载 |
---|---|---|
Datasheet X20AI2237 | PDF / 417 KB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X20 System User´s Manual | PDF / 7 MB |