Short description
Accessories | Dummy module without function |
General information
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
UL |
cULus E115267 Industrial control equipment |
HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
DNV |
Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
LR | ENV1 |
ABS | Yes |
BV |
EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
EAC | Yes |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Note |
Order 1x terminal block X20TB06 or 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 or 1x power supply bus module X20BM01 separately. |
Pitch | 12.5+0.2 mm |
物料号:
X20ZF0000描述:
- Place holder for later system expansion
- Used as a terminal holder
- Module with no electrical function
The module is used as a place holder for later system expansion.
必备附件
Bus modules
X20BM01 | X20 power supply bus module, 24 VDC keyed, internal I/O power supply interrupted to the left |
X20BM05 | X20 power supply bus module, with node number switch, 24 VDC keyed, internal I/O power supply interrupted to the left |
X20BM11 | X20 bus module, 24 VDC keyed, internal I/O power supply connected through |
X20BM15 | X20 bus module, with node number switch, 24 VDC keyed, internal I/O power supply connected through |
Automation Studio硬件升级 | 版本(日期) | 下载 |
---|---|---|
V4.0 HW Upgrade (X20ZF0000) | EXE / 249 KB |
E-CAD(电子或EPLAN模板) | 版本(日期) | 下载 |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 MB |
M-CAD(机械模板) | 版本(日期) | 下载 |
---|---|---|
3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
Dimensions PDF X20 Electronic module | PDF / 3 KB |
文档 | 版本(日期) | 下载 |
---|---|---|
Datasheet X20ZF0000 | PDF / 117 KB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X20 System User´s Manual | PDF / 7 MB |