Short description
| I/O module | 4 digital outputs for controlling external power triacs or non-parallel thyristors |
General information
Digital outputs
| Variant | Opto-triac |
| Circuit | Normally open contact |
| Nominal voltage | 48 to 240 VAC |
| Max. voltage | 264 VAC |
| Rated frequency | 47 to 63 Hz |
| Nominal current at 25°C | |
| Nominal output current | 80 mA |
| Total nominal current | 320 mA |
| Current over entire temperature range | |
| Output current | 50 mA |
| Summation current | 200 mA |
| Connection type | 2-wire connections |
| Zero-crossing detection | Yes |
| Holding current | Max. 3.5 mA |
| Leakage current | Max. 1.5 mA (per channel) |
| Residual voltage (on-state voltage) | Max. 3 V |
| Phase-angle control | |
| Area | 5 to 95% |
| Resolution | 1% |
| Accuracy (60 to 240 VAC) | <100 μs |
| Voltage monitoring L - N | No |
| Recommended wiring | Twisted pair cabling to the terminal pairs |
| Line length | Max. 10 m |
| Overvoltage protection between L and N | Yes |
| Insulation voltages | |
| Channel - Bus | Tested at 2300 VAC |
| Channel - Channel | Tested at 2300 VAC |
| Protective circuit | |
| External | Generally fuse |
| Internal | Snubber circuit (RC element) and varistor |
Electrical properties
| Electrical isolation | Channel isolated from channel, bus and I/O power supply |
Operating conditions
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | |
| 0 to 2000 m | No limitation |
| >2000 m | Not permitted |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | - |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Note |
Order 1x terminal block X20TB32 separately. Order 1x bus module X20BM12 separately. |
| Pitch | 12.5+0.2 mm |
Malzeme numarası:
X20DO4613Açıklama:
- 4 digital outputs
- Controls external power triacs or non-parallel thyristors
- Outputs with 48 - 240 VAC
- 50 Hz or 60 Hz
- Outputs electrically isolated from one another
- Phase-angle control
- Zero-crossing detection
- Negative half-waves can be switched off
- 2-wire connections
- 240 V coding
- OSP mode
- Frequency mode
The module is a digital output module that is equipped with 4 opto-triac outputs using phase-angle control. L and N are fed to the module for zero-crossing detection.
The 4 outputs are electrically isolated from one another and are used for controlling external power triacs or nonparallel thyristors.
Zorunlu aksesuarlar
| Automation Studio donanım yükseltmeleri | Sürüm (Tarih) | İndirme |
|---|---|---|
| V2.7 HW Upgrade (X20DO4613) | EXE / 1 MB | |
| V3.0 HW Upgrade (X20DO4613) | EXE / 2 MB | |
| V4.0 HW Upgrade (X20DO4613) | EXE / 1 MB |
| Dökümantasyon | Sürüm (Tarih) | İndirme |
|---|---|---|
| Data sheet X20DO4613 | PDF / 2 MB | |
| X20 Package leaflet ATEX/CSA | PDF / 2 MB | |
| X20 System User´s Manual | PDF / 49 MB |
| E-CAD (Elektro veya EPLAN şablonları) | Sürüm (Tarih) | İndirme |
|---|---|---|
| X20 EPLAN P8 from V2.4 | EXE / 160 MB |
| M-CAD (Mechan. Şablonlar) | Sürüm (Tarih) | İndirme |
|---|---|---|
| 3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
| 3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
| Dimensions PDF X20 Electronic module | PDF / 3 KB |