Short description
I/O module |
2x M12 interface each with 2 safe type A digital inputs and 2 pulse outputs, 24 VDC, 2x standardized 8-pin M12 device interface each with 1 digital input without safety function and 2 safe type A digital inputs and 2 pulse outputs, 24 VDC and 1 digital output without safety function, 24 VDC, 0.6 A and 1 device power supply, 24 VDC, 2 A |
General information
Safety characteristics
24 VDC output
Output voltage | 24 VDC -15% / +20% |
Output current | 2 A |
I/O power supply
Nominal voltage | 24 VDC |
Voltage range | 18 to 30 VDC |
Integrated protection | Reverse polarity protection |
Digital inputs
Safe digital inputs
Digital outputs
Quantity | 2 |
Variant | FET, positive switching, output level readable |
Nominal voltage | 24 VDC |
Switching voltage | I/O power supply minus voltage drop due to RDS(on) |
Max. switching frequency | See section "Inrush current behavior for output channels". |
Nominal output current | 0.6 A |
Total nominal current | 1.2 A |
Output protection | See section "Inrush current behavior for output channels". |
Leakage current when the output is switched off | <500 μA |
RDS(on) | 300 mΩ |
Peak short-circuit current | See section "Inrush current behavior for output channels". |
Braking voltage when switching off inductive loads | 50 VDC |
Insulation voltage between channel and bus | 500 Veff |
Max. capacitive load | 100 nF |
Peak output current | 1 A |
Pulse outputs
Operating conditions
Mounting orientation | |
Any | Yes |
Installation elevation above sea level | 0 to 2000 m, no limitation |
Degree of protection per EN 60529 | IP67 |
Mechanical properties
Dimensions | |
Width | 53 mm |
Height | 85 mm |
Depth | 42 mm |
Weight | 190 g |
Torque for connections | |
M8 | Max. 0.4 Nm |
M12 | Max. 0.6 Nm |
Número do material:
X67SI8103Descrição:
- 8 safe digital inputs, sink circuit
- 2 pulse outputs - available on all 4 female connectors
- 2 standard inputs, sink circuit
- 2 standard outputs, source circuit
- Device supply
- Software input filter configurable for each channel
- Standardized 8-pin M12 device interface
This module is equipped with 8 safe digital inputs. They are designed for a nominal voltage of 24 VDC.
The module can be used to read various digital signals in safety-related applications up to PL e or SIL 3.
The module is equipped with filters that are individually configurable for switch-on and switch-off behavior. The module also provides pulse signals for diagnosing the sensor line.
Atualizações de HW Automation Studio | Version (Data) | Download |
---|---|---|
V3.0 HW Upgrade (X67SI8103) | EXE / 3 MB | |
V4.0 HW Upgrade (X67SI8103) | EXE / 3 MB | |
V4.6 HW Upgrade (X67SI8103) | EXE / 2 MB | |
V6.0 HW Upgrade (X67SI8103) | EXE / 2 MB |
Documentação | Version (Data) | Download |
---|---|---|
Data sheet X67SI8103 - Legacy | PDF / 2 MB | |
Data sheet X67SI8103 - mapp Safety | PDF / 1 MB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X67 System User´s Manual | PDF / 6 MB |
Ferramentas / Utilitários / Exemplos | Version (Data) | Download |
---|---|---|
Sistema library | ZIP / 336 KB |
M-CAD (Mechan. Modelos) | Version (Data) | Download |
---|---|---|
3D file DFX/STEP X67SI8103 | ZIP / 3 MB |