Please choose country and language

V4.6 HW Upgrade (X20SC0842)

DWL@DWL10000604600

Version Language
Operating System
Date
Size
Type Download
2.3.0.0 * 09/02/2020 2 MB EXE AS4_HW_X20SC0842.exe
Description V4.6 HW Upgrade (X20SC0842)

Revision information X20SC0402

Version 2.3.0.0:

ID: 692340
Support of the DYNlink interface
The DYNlink interface is supported by the safe inputs.
Channel description changed: No
Configuration description changed: Yes
Firmware changed:Yes

ID: 692380 / Support ID: 400311305
The OSDD signal at the pulse output is corrected.
The OSDD signal at the pulse output is output correctly even when not in use.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 696550
New data sheet V2.07
For changes see chapter "Version history" in the data sheet.
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 10\59384_1.fw(572)

Version 2.2.0.1:

ID: 668540
Adaptations for Automation Studio 4.8
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 688710 / Support ID: 400299371
Loss of safety connection
Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 689695
Propagation delay statistics
The Propagation delay statistics can now be read out.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 689890
Increased delay of external feedback error detection
Increased delay of external feedback error detection
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 689925
Improvement of the internal voltage monitoring.
Improvement of the internal voltage monitoring.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 689995
Improvement of the feedback diagnosis.
Improvement of the feedback diagnosis of the output.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 690070
New data sheet V2.06
For changes see chapter "Version history" in the data sheet.
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 10\59384_1.fw(571)

Version 2.1.0.0:

ID: 568710
Acknowledge several Channel errors with one ReleaseOutput edge.
Severalchannel error of different types(HSHS, HSLS) are acknowledged with only one ReleaseOutput edge.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 596890 / Support ID: 400253825
cleared statement in help about open circuit detection
cleared statement in help that the module has no open circuit detection
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 644155
major (even incompatible) changes for mapp Safety
First upgrade for mapp Safety.
ATTENTION: existingapplications must be adapted - see chapter "Switching to mapp Safety" in help!
Channel description changed: Yes
Configuration description changed: Yes
Firmware changed: Yes
Firmware: 10\59384_1.fw(570)

Version 1.10.9.1:

ID: 643135
data sheet V1.141
See chapture "Version history" in the data sheet.
i.a. calculation of Safety response time has been updated.
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\59384_1.fw(330)

Version 1.10.9.0:

ID: 618210
logger entry 112174, 108078
Logger entry 112174, 108078 could happen sporadically with large projects.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\59384_1.fw(330)

Version 1.10.1.0:

ID: 516610 / Support ID: 400203957
add PhysicalStateChannels on X20SLX842
add PhysicalStateChannels on X20SLX842.
Channel description changed: Yes
Configuration description changed: No
Firmware changed: Yes

ID: 539150
Adapt filter algorithm to eliminate dependencies between TON and TOF-filter
Filter algorithm was adapted toeliminate dependencies between TON and TOF-filter which existed since FW V301.
Channel description changed: No
Configuration description changed:No
Firmware changed: Yes

ID: 541650
New default values
The default values for "Filter On" and "Discrepancy Time" have been modified
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 549925
Provide CRC of the Firmware
Provide CRC of the Firmware
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID:570155
Increase the tolerance of the voltage monitor
The tolerance of the voltage monitor was increased to prevent sporadic false errors 99849
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\59384_1.fw(325)

Version 1.10.0.6:

ID: 532880
Add blackout mode
Add blackout mode
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No

ID: 532885
New channel for ConnectionValid
New channel for ConnectionValid
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No

ID: 532890
Update ECAD data
Update ECAD data
Channel descriptionchanged: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\59384_1.fw(322)

Version 1.10.0.3:

ID: 473000
Improved stability
The stability of the module was improved
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\59384_1.fw(322)

Version 1.10.0.2:

ID: 473375
first official release
first official release
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\59384_1.fw(320)
Version Language
Operating System
Date
Size
Type Download
2.2.0.1 * 07/21/2020 2 MB EXE AS4_HW_X20SC0842.exe
Description V4.6 HW Upgrade (X20SC0842)

Revision information X20SC0402

Version 2.2.0.1:

ID: 668540
Adaptations for Automation Studio 4.8
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 688710 / Support ID: 400299371
Loss of safety connection
Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 689695
Propagation delay statistics
The Propagation delay statistics can now be read out.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 689890
Increased delay of external feedback error detection
Increased delay of external feedback error detection
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 689925
Improvement of the internal voltage monitoring.
Improvement of the internal voltage monitoring.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 689995
Improvement of the feedback diagnosis.
Improvement of the feedback diagnosis of the output.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 690070
New data sheet V2.06
For changes see chapter "Version history" in the data sheet.
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware:10\59384_1.fw(571)

Version 2.1.0.0:

ID: 568710
Acknowledge several Channel errors with one ReleaseOutput edge.
Several channel error of different types(HSHS, HSLS) are acknowledged with only one ReleaseOutput edge.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 596890 / Support ID: 400253825
cleared statement in help about open circuit detection
cleared statement in help that the module has no open circuit detection
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 644155
major (even incompatible) changes for mapp Safety
First upgrade for mapp Safety.
ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help!
Channel description changed: Yes
Configuration description changed: Yes
Firmware changed: Yes
Firmware: 10\59384_1.fw(570)

Version 1.10.9.1:

ID: 643135
data sheet V1.141
See chapture "Version history" in the data sheet.
i.a. calculation of Safety response time has been updated.
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\59384_1.fw(330)

Version 1.10.9.0:

ID: 618210
logger entry 112174, 108078
Logger entry 112174, 108078 could happen sporadically with large projects.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\59384_1.fw(330)

Version 1.10.1.0:

ID: 516610 / Support ID: 400203957
add PhysicalStateChannels onX20SLX842
add PhysicalStateChannels on X20SLX842.
Channel description changed: Yes
Configuration description changed: No
Firmware changed: Yes

ID: 539150
Adapt filter algorithm to eliminate dependencies between TON and TOF-filter
Filter algorithm was adapted to eliminate dependencies between TON and TOF-filter which existed since FW V301.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 541650
New default values
The default values for "Filter On" and "Discrepancy Time" have been modified
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 549925
Provide CRC of the Firmware
Provide CRC of the Firmware
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 570155
Increase the tolerance of the voltage monitor
The tolerance of the voltage monitor was increased to prevent sporadic false errors 99849
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\59384_1.fw(325)

Version 1.10.0.6:

ID: 532880
Add blackout mode
Add blackout mode
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No

ID: 532885
New channel for ConnectionValid
New channel for ConnectionValid
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No

ID: 532890
Update ECAD data
Update ECAD data
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\59384_1.fw(322)

Version 1.10.0.3:

ID: 473000
Improved stability
The stability of the module was improved
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\59384_1.fw(322)

Version 1.10.0.2:

ID: 473375
first official release
first official release
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\59384_1.fw(320)
Version Language
Operating System
Date
Size
Type Download
2.1.0.0 * 07/05/2019 2 MB EXE AS4_HW_X20SC0842.exe
Description V4.6 HW Upgrade (X20SC0842)

Revision information X20SC0402

Version 2.1.0.0:

ID: 568710
Acknowledge several Channel errors with one ReleaseOutput edge.
Several channel error of different types(HSHS, HSLS) are acknowledged with only one ReleaseOutput edge.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 596890 / Support ID: 400253825
cleared statement in help about open circuit detection
cleared statement in help that the modulehas no open circuit detection
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 644155
major (even incompatible) changes for mapp Safety
First upgrade formapp Safety.
ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help!
Channel description changed: Yes
Configuration description changed: Yes
Firmware changed: Yes
Firmware: 10\59384_1.fw(570)

Version 1.10.9.1:

ID: 643135
data sheet V1.141
See chapture "Version history" in the data sheet.
i.a. calculation of Safety response time has been updated.
Channel descriptionchanged: No
Configuration description changed: No
Firmware changed:No
Firmware: 1\59384_1.fw(330)

Version 1.10.9.0:

ID: 618210
logger entry 112174, 108078
Logger entry 112174, 108078 could happen sporadically with large projects.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\59384_1.fw(330)

Version 1.10.1.0:

ID: 516610 / Support ID: 400203957
add PhysicalStateChannels on X20SLX842
add PhysicalStateChannels on X20SLX842.
Channel description changed: Yes
Configuration description changed: No
Firmware changed: Yes

ID: 539150
Adapt filter algorithm to eliminate dependencies between TON and TOF-filter
Filter algorithm was adapted to eliminate dependencies between TON and TOF-filter which existed since FW V301.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 541650
New default values
The default values for "Filter On" and "Discrepancy Time" have been modified
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID:549925
Provide CRC of the Firmware
Provide CRC of the Firmware
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 570155
Increase the tolerance of thevoltage monitor
The tolerance of the voltage monitor was increased to prevent sporadic false errors 99849
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\59384_1.fw(325)

Version 1.10.0.6:

ID: 532880
Add blackout mode
Add blackout mode
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No

ID: 532885
New channel for ConnectionValid
New channel for ConnectionValid
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No

ID: 532890
Update ECAD data
Update ECAD data
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\59384_1.fw(322)

Version 1.10.0.3:

ID: 473000
Improved stability
The stability of the module was improved
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\59384_1.fw(322)

Version 1.10.0.2:

ID: 473375
first official release
first official release
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\59384_1.fw(320)

Related Products

X20SC0842
Back to list

Please choose country and language

B&R Logo

Please choose country

B&R Logo