Please choose country and language

V4.0 HW Upgrade (8BVIxxxxxxSA.xxx-x)

DWL@DWL10000261377

Version Language
Operating System
Date
Size
Type Download
2.3.0.1 * 09/09/2020 249 KB EXE AS4_HW_8BVIxxxxxxSA.xxx-x.exe
Description V4.0 HW Upgrade (8BVIxxxxxxSA.xxx-x)

Revision information 8BVI0014HCSA.000-1

Version 2.3.0.1:

ID: 679935 / Support ID: 400315432
Parameter Supervision removed because it is without an effect
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 682275
Parameter "SdcEnabled" initialized incorrectly
Data type of parameter was changed to STRING and inital value to"off".
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 682450
Add-on for usageof automatic DNA configuration
Feature add-on "DNA Configuration automatic" from Automation Studio 4.9
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

Version 2.3.0.0:

ID: 600395
Misconfiguration of mapp Motion axis assignment not detected in Automation Studio
mapp Motion axes can be assigned to adrive multiple times. This error is not recognized until runtime.
Corrected in combination with:
- mapp Motion V5.4.0
- Automation Studio V4.4.4
Channel description changed: No
Configuration description changed: No
Firmware changed: No

Version 2.2.0.1:

ID: 551865
Wrong module width
Wrong module width in Automation Studio System Designercorrected.
Channel description changed: No
Configuration description changed: No
Firmware changed: No

Version 1.5.0.0:

ID: 342585
HW upgrade for support of 8BVI0014HCSA.000-1
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Version Language
Operating System
Date
Size
Type Download
2.3.0.0 * 09/18/2018 205 KB EXE AS4_HW_8BVIxxxxxxSA.xxx-x.exe
Description V4.0 HW Upgrade (8BVIxxxxxxSA.xxx-x)

Revision information 8BVI0014HCSA.000-1

Version 2.3.0.0:

ID: 600395
Misconfiguration of mapp Motion axis assignment not detected in Automation Studio
mapp Motion axes can be assigned to a drive multiple times. This error is not recognized until runtime.
Corrected in combination with:
- mapp Motion V5.4.0
- Automation Studio V4.4.4
Channel description changed: No
Configuration description changed: No
Firmware changed: No

Version 2.2.0.1:

ID: 551865
Wrong module width
Wrong module width in Automation Studio System Designer corrected.
Channel description changed: No
Configuration description changed: No
Firmware changed: No

Version1.5.0.0:

ID: 342585
HW upgrade for support of 8BVI0014HCSA.000-1
Channel description changed: No
Configuration description changed:No
Firmware changed: No
Version Language
Operating System
Date
Size
Type Download
2.2.0.1 * 09/01/2017 195 KB EXE AS4_HW_8BVIxxxxxxSA.xxx-x.exe
Description V4.0 HW Upgrade (8BVIxxxxxxSA.xxx-x)

Revision information 8BVI0014HCSA.000-1

Version 2.2.0.1:

ID: 551865
Wrong module width
Wrong module width in Automation Studio System Designer corrected.
Channel description changed: No
Configuration description changed: No
Firmware changed: No

Version 1.5.0.0:

ID: 342585
HW upgradefor support of 8BVI0014HCSA.000-1
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Back to list

Please choose country and language

B&R Logo

Please choose country

B&R Logo