4PP420.1043-75

General information

LEDs	Power/User, CF
B&R ID code	0x23BD
Battery
Type	Renata 950 mAh
Service life	3 years
Removable	Yes, accessible from the outside
Backup capacitor
Buffer time	10 min
Variant	Lithium ion
Power button	Yes
Reset button	Yes
Certifications
CE	Yes
UKCA	Yes
UL	cULus E115267 Industrial control equipment
KC	Yes

Controller

Bootloader	Automation Runtime
Processor
Type	Geode LX800
Clock frequency	500 MHz
L1 cache	128 kB (64 kB I-cache / 64 kB D-cache)
L2 cache	128 kB
Expanded command set	MMX technology, 3D Now
Floating point unit (FPU)	Yes
Flash	2 MB (for firmware)
Cooling	Passive via heat sink
Mode/Node switches	2, 16 positions each
Watchdog	MTCX
Real-time clock
Accuracy	At 25°C: Typ. 30 ppm (2.5 seconds) per day
Battery-backed	Yes
Power failure logic
Controller	MTCX
Buffer time	10 ms
Graphics
Controller	Geode LX800
Memory	8 MB shared memory (reserved by main memory)
SRAM
Size	512 kB
Battery-backed	Yes

Display

Type	TFT color
Diagonal	10.4" (264 mm)
Colors	262,144
Resolution	VGA, 640 x 480 pixels
Contrast	900:1
Viewing angles
Horizontal	Direction R = 80° / Direction L = 80°
Vertical	Direction U = 80° / Direction D = 80°
Backlight
Type	LED
Brightness	450 cd/m²
Half-brightness time	70,000 h
Filter glass
Transmittance	-
Anti-glare coating	-
Touch screen
Type	AMT
Technology	Analog, resistive
Controller	Elo, serial, 12-bit
Transmittance	Up to 80% ±5%

Interfaces

COM1
Type	RS232, modem supported, not galvanically isolated
Variant	9-pin male DSUB connector
UART	16C550-compatible, 16-byte FIFO buffer
Max. baud rate	115 kbit/s
CompactFlash slot 1
Type	Type I
USB
Quantity	2
Type	USB 1.1, USB 2.0
Variant	Type A
Transfer rate	Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s)
Current-carrying capacity	Max. 500 mA per connection
Ethernet
Quantity	1
Controller	Intel 82551ER
Transfer rate	10/100 Mbit/s
Max. baud rate	100 Mbit/s

Keys

Function keys	No
Soft keys	No
System keys	No
Service life	-
LED luminous intensity	-

Slots

aPCI slots	1

Electrical properties

Nominal voltage	18 to 30 VDC
Nominal current	0.71 A
Bleeder resistance	0 Ω
Inrush current	Max. 2.8 A
Power consumption	Typ. 17 W
Galvanic isolation	Yes

Operating conditions

Degree of protection per EN 60529	Back: IP20 (only with connected CF card, connected aPCI module or optional aPCI cover) Front: IP65 / NEMA 250 type 4X indoor, protected against dust and hose-directed water

Ambient conditions

Temperature
Operation	0 to 50°C
Storage	-20 to 70°C
Transport	-20 to 70°C
Vibration
Operation (continuous)	2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g
Operation (occasional)	2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g
Storage	2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Transport	2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Shock
Operation	15 g, 11 ms
Storage	30 g, 15 ms
Transport	30 g, 15 ms
Elevation
Operation	Max. 3000 m

Mechanical properties

Housing
Material	Metal
Front
Frame	Aluminum, naturally anodized
Design	Gray
Panel overlay
Material	Polyester
Light background color	Similar to Pantone 427CV
Dark border color around display	Similar to Pantone 432CV
Gasket	Flat gasket around display front
Dimensions
Width	323 mm
Height	260 mm
Depth	86 mm
Weight	3900 g

Materiaalnummer:

4PP420.1043-75

Omschrijving:

Power Panel PP420, 10.4" VGA color TFT display with touch screen (resistive), 1 aPCI slot, 128 MB SDRAM, 512 kB SRAM CompactFlash slot (type I), ETH 10/100, RS232, 2x USB, IP65 protection (front), 24 VDC (order screw clamp terminal block 0TB103.9 or cage clamp terminal block 0TB103.91 separately).

Vereiste toebehoren

Accessories

0TB103.9	Connector 24 VDC - 3-pin, female - Screw clamp terminal block 3.31 mm²
0TB103.91	Connector 24 VDC - 3-pin, female - Cage clamp terminal block 3.31 mm²

Optionele toebehoren

Batteries

4A0006.00-000	Lithium battery, 3 V / 950 mAh, button cell

USB accessories

5MMUSB.2048-01	USB 2.0 flash drive 2048 MB B&R

Undefined

3IF786.9	aPCI interface module, 1 POWERLINK interface module, managing or controlled node, 1 RS232 interface
3IF786.9-1	aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 RS232 interface
3IF787.9	aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 CAN bus interface, max. 500 kbps, object buffer in the transmit and receive directions, network-capable, electrically isolated, order 1x terminal block TB704 separately!
3IF787.9-1	aPCI interface module, 1 POWERLINK interface, managing or controlled node 1 CAN bus interface, electrically isolated, network-capable, max. 500 kbit/s, object buffer in transmit and receive directions, order 1x terminal block TB704 separately!
3IF789.9	aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 X2X Link master interface, electrically isolated, order 1x terminal block TB704 separately!
3IF789.9-1	aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 X2X Link master interface, electrically isolated, order 1x terminal block TB704 separately!
4AC200.1000-00	Cover for aPCI slot

aPCI communication modules

3IF772.9	aPCI interface module, 1 RS232 interface, 2 CAN bus interfaces, electrically isolated, network-capable, max. 500 kbit/s, object buffer in transmit and receive direction, order 2x terminal blocks 0TB704.9 separately!

Automation Studio HW Upgrades	Versie (Datum)	Download
V4.0 HW Upgrade (4PP420.1043-75)		EXE / 3 MB Login voor downloaden

Documentatie	Versie (Datum)	Download
Power Panel 300/400 User's Manual		PDF / 9 MB Login voor downloaden

Firmware Upgrades	Versie (Datum)	Download
Firmware Upgrade (MTCX)		ZIP / 164 KB Login voor downloaden

M-CAD (Mechan. Templates)	Versie (Datum)	Download
3D file DXF/STEP 4PP420.1043-75		ZIP / 3 MB Login voor downloaden
Dimensions, cutout pdf 4PP420.1043-75		PDF / 368 KB Login voor downloaden