DWL@DWL10000791412
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 3.0.2.0 | * | 15/12/2025 | 473 Ko | EXE | AS6_HW_X20SO4110.exe | |
| Description |
V6.0 HW Upgrade (X20SO4110) Revision information X20SO4110 Version 3.0.2.0: ID: FUVI-12000 Improved bootup behavior Fixed stability issues; faster bootup Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\56708_1.fw(652) Version 3.0.0.0: ID: FUVI-11178 Control of the outputs reworked Control of the outputs reworked Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: FUVI-11177 New data sheet V3.0.0 New data sheet V3.0.0 Channel description changed: No Configuration description changed: No Firmware changed: No ID: FUVI-11176 First official release for Safety+ First official release for Safety+ Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(650) Version 2.3.0.1: ID: 783540 Configuration for Power Calculation available The Configuration for Power Calculation is now available in Automation Studio Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 10\56708_1.fw(573) Version 2.3.0.0: ID: 715260 Failsafe at every boot It could happen underrare conditions that the module is stuck in failsafe state at every boot, generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 726625 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727170 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(573) Version 2.2.1.0: ID: 706355 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 706425 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(572) Version 2.2.0.1: ID: 688750 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688885 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688945 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed:No Configuration description changed: No Firmware changed: Yes ID: 688960 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\56708_1.fw(571) Version 2.1.0.0: ID: 644165 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\56708_1.fw(570) Version 1.10.10.0: ID: 622780 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(331) Version 1.10.9.1: ID: 643150 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300),6\56708_1.fw(330) Version 1.10.9.0: ID: 618270 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(330) Version 1.10.1.1: ID: 422790 Correction for FBK_Status_1 Correction for FBK_Status_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 532525 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532690 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552490 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed:Yes ID: 552520 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(325) Version 1.10.0.6: ID: 532680 Addblackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532685 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.10.0.2: ID: 507370 Added information about internal cycletime Added information about internal cycletime Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.10.0.1: ID: 473225 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 473235 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.9.0.1: ID: 413905 SafeModuleID >300 Now it is possibleto set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414075 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414260 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414400 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300) Version 1.6.0.9: ID: 393950 first officialrelease first official release Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 3\56708_1.fw(281) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 3.0.0.0 | * | 25/07/2025 | 772 Ko | EXE | AS6_HW_X20SO4110.exe | |
| Description |
V6.0 HW Upgrade (X20SO4110) Revision information X20SO4110 Version 3.0.0.0: ID: FUVI-11178 Control of the outputs reworked Control of the outputs reworked Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: FUVI-11177 New data sheet V3.0.0 New data sheet V3.0.0 Channel description changed: No Configuration description changed: No Firmware changed: No ID: FUVI-11176 First official release for Safety+ First official release for Safety+ Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56710_1.fw(650) Version 2.6.0.0: ID: 783560 Configuration for Power Calculation available The Configuration for Power Calculation is now available in Automation Studio Channel description changed:No Configuration description changed: Yes Firmware changed: No ID: 784570 New data sheet V2.20 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56710_1.fw(580) Version 2.5.0.0: ID: 719785 Failsafe at every boot It could happen under rare conditions that the module is stuck infailsafe state at every boot, generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 726650 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727180 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56710_1.fw(575) Version 2.4.1.0: ID: 706300 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot timeadjusted. Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes ID: 706430 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56710_1.fw(574) Version 2.3.0.0: ID: 670530 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 688690 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689735 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689970 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 690125 New data sheet V2.06 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56710_1.fw(572) Version 2.1.0.0: ID: 644200 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\56710_1.fw(570) Version 1.10.10.1: ID: 643455 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 7\56710_1.fw(331) Version1.10.10.0: ID: 622750 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 7\56710_1.fw(331) Version 1.10.9.0: ID: 618190 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 7\56710_1.fw(330) Version 1.10.1.0: ID: 543030 Improve the description section in the OSDD files Improvethe description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 570635 set SafeOutputOKs even when channel is not mapped SafeOutputOKs are set now even when channel is not mapped Channel descriptionchanged: No Configuration description changed: No Firmware changed:Yes ID: 582220 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 7\56710_1.fw(325) Version 1.10.0.6: ID: 543025 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 543035 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed:No ID: 543040 Add blackout mode Add blackout mode Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 7\56710_1.fw(320) Version 1.10.0.2: ID: 482610 first official release first official release Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 7\56710_1.fw(320) Version 1.10.0.0: ID: 482610 first official release first official release Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 7\56710_1.fw(320) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.3.0.1 | * | 24/06/2024 | 2 Mo | EXE | AS6_HW_X20SO4110.exe | |
| Description |
V6.0 HW Upgrade (X20SO4110) Revision information X20SO4110 Version 2.3.0.1: ID: 783540 / Support ID: 400412437 Configuration for Power Calculation available The Configuration for Power Calculation isnow available in Automation Studio Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 10\56708_1.fw(573) Version 2.3.0.0: ID: 715260 Failsafeat every boot It could happen under rare conditions that the module is stuck in failsafe state at every boot, generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 726625 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727170 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(573) Version 2.2.1.0: ID: 706355 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 706425 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(572) Version 2.2.0.1: ID: 688750 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688885 Propagation delay statistics The Propagation delaystatistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688945 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688960 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\56708_1.fw(571) Version 2.1.0.0: ID: 644165 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\56708_1.fw(570) Version 1.10.10.0: ID: 622780 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 havebeen fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(331) Version 1.10.9.1: ID: 643150 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(330) Version 1.10.9.0: ID: 618270 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(330) Version 1.10.1.1: ID: 422790 / Support ID: 400159073, 400171675, 400201071 Correction for FBK_Status_1 Correction for FBK_Status_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 532525 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532690 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552490 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552520 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(325) Version 1.10.0.6: ID: 532680 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532685 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.10.0.2: ID: 507370 Added information about internal cycletime Added information about internal cycletime Channel description changed:No Configuration description changed: Yes Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.10.0.1: ID: 473225 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 473235 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.9.0.1: ID: 413905 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414075 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414260 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414400 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300) Version 1.6.0.9: ID: 393950 first official release first official release Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 3\56708_1.fw(281) |
|||||
