DWL@DWL10000285695
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 1.10.12.0 | * | 16/04/2021 | 2 Mo | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.0 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 1.10.12.0: ID: 710615 Timing of module internal communication updated The timing of the module internal communication was updated. Sporadic errors 98818, 119317, 99348, 102914, 99350 no longer occur. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 710780 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 6\47285_1.fw(334) Version 1.10.11.0: ID: 692675 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692575 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(333) Version 1.10.10.1: ID: 669805 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.10.0: ID: 622660 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.9.1: ID: 643130 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.9.0: ID: 615210 Correction of the internal Vref measurement Internal Vref measurement adapted for the extended temperature range Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 618205 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.1.5: ID: 585620 User configurable calculation of the input value during internal tests also in AS 3.x User configurable calculation of the input value during internal tests also in AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.1.1: ID: 306540 / Support ID: 400096897 selected thresholds are transmited via acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.10.11.0 | * | 17/09/2020 | 2 Mo | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.0 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 1.10.11.0: ID: 692675 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692575 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(333) Version 1.10.10.1: ID: 669805 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.10.0: ID: 622660 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.9.1: ID: 643130 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.9.0: ID: 615210 Correction of the internal Vref measurement Internal Vref measurement adapted for the extended temperature range Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 618205 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.1.5: ID: 585620 User configurable calculation of the input value during internal tests also in AS 3.x User configurable calculation of the input value during internal tests also in AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.1.1: ID: 306540 / Support ID: 400096897 selected thresholds are transmited via acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.10.10.1 | * | 31/01/2020 | 2 Mo | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.0 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 1.10.10.1: ID: 669805 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.10.0: ID: 622660 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.9.1: ID: 643130 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.9.0: ID: 615210 Correction of the internal Vref measurement Internal Vref measurement adapted for the extended temperature range Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 618205 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.1.5: ID: 585620 User configurable calculation of the input value during internal tests also in AS 3.x User configurable calculation of the input value during internal tests also in AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.1.1: ID: 306540 / Support ID: 400096897 selected thresholds are transmited via acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.10.9.1 | * | 16/05/2019 | 2 Mo | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.0 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 1.10.9.1: ID: 643130 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.9.0: ID: 615210 Correction of the internal Vref measurement Internal Vref measurement adapted for the extended temperature range Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 618205 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.1.5: ID: 585620 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internal tests alsoin AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.1.1: ID: 306540 / Support ID: 400096897 selectedthresholds are transmited via acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmwarechanged: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the inputvalue during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timingparameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed:No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.10.9.0 | * | 08/11/2018 | 2 Mo | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.0 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 1.10.9.0: ID: 615210 Correction of the internal Vref measurement Internal Vref measurement adapted for the extended temperature range Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 618205 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.1.5: ID: 585620 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internal tests alsoin AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.1.1: ID: 306540 / Support ID: 400096897 selected thresholds are transmited via acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety responsetime is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration descriptionchanged: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changedmanual verion to 1.70 Channel description changed: No Configurationdescription changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supportsSafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.10.1.5 | * | 05/10/2018 | 2 Mo | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.0 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 1.10.1.5: ID: 585620 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internal tests alsoin AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.1.1: ID: 306540 / SupportID: 400096897 selected thresholds are transmited via acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302),6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware:3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correctionfor responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration descriptionchanged: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.10.1.1 | * | 28/07/2017 | 2 Mo | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.0 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 1.10.1.1: ID: 306540 / Support ID: 400096897 selected thresholds are transmited via acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
