X20SO2120

Short description
I/O module 2 safe type A digital outputs, with current monitoring, 24 VDC, 2 A, OSSD <500 µs
General information
B&R ID code 0x2009
Status indicators I/O function per channel, operating state, module status
Diagnostics
Module run/error Yes, using LED status indicator and software
Outputs Yes, using LED status indicator and software
Blackout mode
Scope Module
Function Module functionality
Standalone mode No
Power consumption
Bus 0.25 W
Internal I/O 0.98 W
Additional power dissipation caused by actuators (resistive) [W] 1.92
Electrical isolation
Channel - Bus Yes
Channel - Channel No
Certifications
CE Yes
UKCA Yes
CRA (Cyber Resilience Act) In preparation
Functional safety cULus FSPC E361559
Energy and industrial systems
Certified for functional safety
ANSI UL 1998:2013
Functional safety IEC 61508:2010, SIL 3
EN 62061:2005/A2:2015, SIL 3
EN ISO 13849-1:2015, Cat. 4 / PL e
IEC 61511:2004, SIL 3
Functional safety EN 50156-1:2004
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
cULus E537419
Engine generator controller
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV Temperature: A (0 to 45°C)
Humidity: B (up to 100%)
Vibration: A (0.7 g)
EMC: B (bridge and open deck)
CCS Yes
LR ENV1
KR Yes
ABS Yes
BV EC21B
Temperature: 5 - 45°C
Vibration: 0.7 g
EMC: Bridge and open deck
KC Yes
Safety characteristics
Note See section "Safety characteristics".
I/O power supply
Nominal voltage 24 VDC
Voltage range 24 VDC -15% / +20%
Integrated protective function Reverse polarity protection
Safe digital outputs
Quantity 2
Variant FET, 1x positive switching, 1x negative switching, type A, output level readable, open-circuit detection
Nominal voltage 24 VDC
Nominal output current 2 A
Total nominal current 4 A
Output protection See section "Inrush current behavior for output channels".
Braking voltage when switching off inductive loads Max. 90 VDC
Open-circuit detection Via internal current measurement,
output current <10 mA: Signal "CurrentOK" = FALSE,
output current 10 to 50 mA: Signal "CurrentOK" = Undefined,
output current >50 mA: Signal "CurrentOK" = TRUE
Error detection time 1 s
Insulation voltage between channel and bus 500 Veff
Peak short-circuit current See section "Inrush current behavior for output channels".
Leakage current when the output is switched off <10 µA
RDS(on) 240 mΩ
Switching voltage I/O power supply minus voltage drop due to RDS(on)
Max. switching frequency See section "Inrush current behavior for output channels".
Test pulse length Max. 500 µs
Time between two test pulses Min. 49.5 ms
Max. capacitive load 100 nF
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level 0 to 2000 m, no limitation
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation 0 to 60°C
Vertical mounting orientation 0 to 50°C
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x safety-keyed terminal block separately.
Order 1x safety-keyed bus module separately.
Pitch 25+0.2 mm
Référence produit:
X20SO2120
Description:
  • 2 safe digital outputs with 2 A
  • Source circuit
  • Output type A
  • Current monitoring
  • Open circuit detection
  • Integrated output protection

This module is equipped with 2 safe digital outputs. The nominal output current is 2 A.

The module can be used for controlling actuators in safety-related applications up to PL e or SIL 3.

The outputs are designed using semiconductor technology so that the safety-related characteristics do not depend on the number of operating cycles. The "high-side low-side" variant (output type A) is limited to actuators without reference potential (e.g. relays, valves). Type A outputs have safety-related advantages since the actuator can be cut off in its connection cable in all error scenarios. Safe digital output channels provide protection against automatic restart when network errors occur and also using a current measurement for open circuit detection.

This module is designed for X20 12-pin terminal blocks.

Accessoires obligatoires
Bus modules
X20BM33 X20 bus module, for X20 SafeIO modules, internal I/O power supply connected through
X20BM36 X20 bus module, for X20 SafeIO modules, with node number switch, internal I/O power supply connected through
Terminal blocks
X20TB52 X20 terminal block, 12-pin, safety-keyed
Automation Studio HW Upgrades Version (date) Téléchargement
V3.0 HW Upgrade (X20SO2120) EXE / 1 Mo
V4.0 HW Upgrade (X20SO2120) EXE / 2 Mo
V4.6 HW Upgrade (X20SO2120) EXE / 2 Mo
V6.0 HW Upgrade (X20SO2120) EXE / 472 Ko
Certifications Version (date) Téléchargement
2226379 CSA Certificate of Compliance X20 X67 PDF / 366 Ko
ABS Certificate of Product Design Assessment - X20 IO Series PDF / 454 Ko
BV Type Approval Certificate - X20 PDF / 556 Ko
CCS Type Approval Certificate - X20 PDF / 285 Ko
E115267 UL Certificate of Compliance X20 PDF / 2 Mo
E537419 UL Certificate of Compliance X20 PDF / 617 Ko
EU Data Act - X20-X67 SafeIO - Connected Product Information Notice PDF / 93 Ko
EU Declaration FS PLC X20 PDF / 210 Ko
EU Declaration of Conformity CE_Declaration_FS_X20 PDF / 420 Ko
FS EN 50156 Zertifikat SafeLOGIC, SafeIO PDF / 314 Ko
FTZU 09 ATEX 0083X PDF / 771 Ko
KR Type Approval Certificate MIL39390-AC003 (X20 System) PDF / 320 Ko
Lloyds Register (X20 only) PDF / 884 Ko
M6A 041745 0010 TÜV Süd FS Certificate SafeDESIGNER, SafeLOGIC, SafeIO PDF / 842 Ko
M6A 041745 0013 TÜV Süd FS Certificate mapp Safety PDF / 1,015 Ko
M6A 041745 0023 TÜV Süd FS Certificate Safety+ PDF / 1,008 Ko
RINA Type Approval Certificate - X20 / Power Panel T30 PDF / 1 Mo
TAA00000BJ DNV Type Approval Certificate X20 PDF / 191 Ko
UK Declaration FS PLC X20 PDF / 112 Ko
X20, X67 KC certificates PDF / 6 Mo
Documentation Version (date) Téléchargement
Data sheets SafeIO and SafeLogic PDF / 29 Mo
Integrated safety technology user's manual PDF / 59 Mo
X20 Package leaflet ATEX/CSA PDF / 2 Mo
X20 System User´s Manual PDF / 49 Mo
E-CAD (modèles Electro ou EPLAN) Version (date) Téléchargement
X20 EPLAN P8 from V2.4 EXE / 160 Mo
M-CAD (modèles mécaniques) Version (date) Téléchargement
3D File STEP X20SO4110 ZIP / 3 Mo
3D file STEP X20(c)Sxxxxx - Terminal block right side ZIP / 21 Ko
DFX File I/O Slice ZIP / 4 Ko
Dimensions PDF X20 I/O Slice PDF / 45 Ko
Outils / Utilitaires / Exemples Version (date) Téléchargement
Sistema (VDMA) library ZIP / 5 Ko

Veuillez sélectionner un pays et une langue

B&R Logo