DWL@DWL10000604623
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 2.3.0.0 | * | 09/06/2021 | 1 Mo | EXE | AS4_HW_X20SO6300.exe | |
| Description |
V4.6 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 2.3.0.0: ID: 719710 Failsafe at every boot It could happen under rare conditions that the module is stuck in failsafe state at every boot, generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configurationdescription changed: No Firmware changed: Yes ID: 726620 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727165 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47125_1.fw(573) Version 2.2.1.0: ID: 706345 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 706420 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47125_1.fw(572) Version 2.2.0.0: ID: 688740 /Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688880 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688895 Increased delay of external feedback error detection Increased delay of external feedback error detection Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688940 Improvement ofthe internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688955 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\47125_1.fw(571) Version 2.1.0.0: ID: 644325 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\47125_1.fw(570) Version 1.10.10.0: ID: 622775 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(331) Version 1.10.9.1: ID: 643450 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation ofSafety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.9.0: ID: 618260 logger entry 112174, 108078 Logger entry112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmwarechanged: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.1.0: ID: 532535 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552495 Provide CRC of theFirmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552525 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(325) Version 1.10.0.6: ID: 532980 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532985 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Added coated type of module in help Added coated type of module in help Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization oftiming parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed:No Configuration description changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414245 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID: 388455 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed:No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version1.6.0.5: ID: 335485 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version1.5.0.0: ID: 294215 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.2.1.0 | * | 01/12/2020 | 1 Mo | EXE | AS4_HW_X20SO6300.exe | |
| Description |
V4.6 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 2.2.1.0: ID: 706345 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 706420 New data sheet V2.08 For changes see chapter "Version history" inthe data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47125_1.fw(572) Version 2.2.0.0: ID: 688740 / Support ID: 400299371 Lossof safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688880 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688895 Increased delay of external feedback error detection Increased delay of external feedback error detection Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688940 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688955 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\47125_1.fw(571) Version 2.1.0.0: ID: 644325 major (even incompatible) changes for mapp Safety First upgrade formapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\47125_1.fw(570) Version 1.10.10.0: ID: 622775 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware:3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(331) Version 1.10.9.1: ID: 643450 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.9.0: ID: 618260 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.1.0: ID: 532535 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552495 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552525 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(325) Version 1.10.0.6: ID: 532980 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532985 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 includingopenSAFETY 1.5 with easier parametrizationof timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed:Yes Firmware changed: No ID: 414245 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID: 388455 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.5: ID: 335485 The module also supports SafetyRelease 1.7 Starting with this version,the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.0: ID: 294215 First Official Release First Official Release Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 3\47125_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.2.0.0 | * | 21/07/2020 | 1 Mo | EXE | AS4_HW_X20SO6300.exe | |
| Description |
V4.6 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 2.2.0.0: ID: 688740 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688880 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688895 Increased delay of external feedback error detection Increaseddelay of external feedback error detection Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688940 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688955 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\47125_1.fw(571) Version 2.1.0.0: ID: 644325 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switchingto mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\47125_1.fw(570) Version 1.10.10.0: ID: 622775 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configurationdescription changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(331) Version 1.10.9.1: ID: 643450 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.9.0: ID: 618260 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.1.0: ID:532535 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552495 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552525 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(325) Version 1.10.0.6: ID: 532980 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmwarechanged: No ID: 532985 New channel for ConnectionValid Newchannel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed:No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it ispossible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414245 parameter max. Switching Frequencyremoved Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID: 388455 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware:3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.5: ID: 335485 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption of module configuration filerelease 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.0: ID: 294215 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.1.0.0 | * | 05/07/2019 | 844 Ko | EXE | AS4_HW_X20SO6300.exe | |
| Description |
V4.6 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 2.1.0.0: ID: 644325 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\47125_1.fw(570) Version 1.10.10.0: ID: 622775 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(331) Version 1.10.9.1: ID: 643450 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation ofSafety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.9.0: ID: 618260 logger entry 112174, 108078 Logger entry112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmwarechanged: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.1.0: ID: 532535 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552495 Provide CRC of theFirmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552525 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(325) Version 1.10.0.6: ID: 532980 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532985 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Added coated type of module in help Added coated type of module in help Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization oftiming parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed:No Configuration description changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414245 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID: 388455 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed:No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version1.6.0.5: ID: 335485 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version1.5.0.0: ID: 294215 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) |
|||||
