DWL@DWL10000391952
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 1.15.0.0 | * | 20/07/2023 | 5 MB | EXE | AS4_HW_X20CP1381-RT.exe | |
| Description |
V4.1 HW Upgrade (X20CP1381-RT) Revision information X20CP1381-RT Version 1.15.0.0: ID: 772650 / Support ID: 400400350, 400406359, 400407650 Wrong power consumption data corrected: calculated values in AS did not match to correct documentation Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(17), 1\58205a0.epl(142) Version 1.14.0.0: ID: 736755 Fixed boot and warm restart issue In rare cases the X20CP13xx does not boot correctly after a restart Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(17), 1\58205a0.epl(142) Version 1.13.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.12.0.0: ID: 704905 / Support ID: 400325418 POWERLINK: Operating mode "Ethernet" If a POWERLINK interface was operatedin operating mode "Ethernet" and connected to a POWERLINK network in this mode, the interface could fail. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(14), 1\58205a0.epl(142) Version 1.11.1.0: ID: 664925 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 695250 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(14), 1\58205a0.epl(141) Version 1.11.0.0: ID: 673080 Additional status bit for rtiABRPos reference impulse loss An additional status bit was introduced, that detects the loss of the reference impulse signals. Channel description changed: No Configurationdescription changed: No Firmware changed: Yes ID: 673095 The insufficient synchronization of the local inputs has been corrected. The local inputs are now delayed by 40ns. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(14), 1\58205a0.epl(141) Version 1.10.0.0: ID: 652300 POWERLINK: Possible failure of already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652395 Error correction: DNA tree topologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669155 Module documentation revised Data sheet V 1.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(141) Version 1.8.0.0: ID: 636540 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 636730 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(138) Version 1.7.0.0: ID: 591635 Correction of the functionality of the timestamp outputs Behavour of the timestamp Bit0 flags of CntTs and LatchTs outputs corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 603370 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs withsetting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(12), 1\58205a0.epl(136) Version 1.6.2.0: ID: 569150 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.6.0.0: ID: 542565 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.5.0.0: ID: 529350 X20(c)CP138x-RT module documentation revised Data sheet V 1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 534325 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 536910 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problemin the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configurationdescription changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.4.0.0: ID: 509635 Corrected FW concerning wrong length check of reACTION task Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(129) Version 1.3.2.0: ID: 497200 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.1.0: ID: 490225 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.0.0: ID: 472230 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472250 new FUB rtiRegister Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 472260 rtiDiv Runtime-Correction in hwx Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472830 Instable reACTION cycle time caused by rtiPWM and rtiDiv corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 474180 hwx description corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476035 Moduledocumentation revised Data sheet V 1.05 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476110 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479340 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.2.0.1: ID: 460565 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.2.0.0: ID: 455385 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455420 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455755 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.0.3.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.2.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.1.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(6), 1\58205a0.epl(123) Version 1.0.0.14: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(5), 1\58205a0.epl(123) Version 1.0.0.11: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.10: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.9: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.8: ID: 358015 Support X20CP1381-RT Channel descriptionchanged: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.7: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.6: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.5: ID: 358015 Support X20CP1381-RT Channel description changed:Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.4: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.3: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.2: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.14.0.0 | * | 24/09/2021 | 5 MB | EXE | AS4_HW_X20CP1381-RT.exe | |
| Description |
V4.1 HW Upgrade (X20CP1381-RT) Revision information X20CP1381-RT-RT Version 1.14.0.0: ID: 736755 Fixed boot and warm restart issue In rare cases the X20CP13xx does not boot correctly after a restart Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(17), 1\58205a0.epl(142) Version 1.13.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.12.0.0: ID: 704905 / Support ID: 400325418 POWERLINK: Operating mode "Ethernet" If a POWERLINK interface was operated in operating mode "Ethernet" and connected to a POWERLINK network in this mode, the interface could fail. Channel description changed: No Configuration description changed: No Firmwarechanged: Yes Firmware: 1\58205_0.pci(14), 1\58205a0.epl(142) Version 1.11.1.0: ID: 664925 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 695250 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(14), 1\58205a0.epl(141) Version 1.11.0.0: ID: 673080 Additional status bit for rtiABRPos reference impulse loss An additional status bit was introduced,that detects the loss of the reference impulse signals. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 673095 The insufficient synchronization of the localinputs has been corrected. The local inputs are now delayed by 40ns. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(14), 1\58205a0.epl(141) Version 1.10.0.0: ID: 652300 POWERLINK: Possible failureof already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652395 Error correction: DNA treetopologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669155 Module documentation revised Data sheet V 1.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(141) Version 1.8.0.0: ID: 636540 POWERLINK-Manager: With frequentfailure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 636730 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(138) Version 1.7.0.0: ID: 591635 Correction of the functionality of the timestamp outputs Behavour of the timestamp Bit0 flags of CntTs and LatchTs outputs corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 603370 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(12), 1\58205a0.epl(136) Version 1.6.2.0: ID: 569150 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.6.0.0: ID: 542565 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.5.0.0: ID: 529350 X20(c)CP138x-RT module documentation revised Data sheet V 1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 534325 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 536910 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.4.0.0: ID: 509635 Corrected FW concerning wrong length check of reACTION task Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(129) Version 1.3.2.0: ID: 497200 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.1.0: ID: 490225 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.0.0: ID: 472230 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472250 new FUB rtiRegister Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 472260 rtiDiv Runtime-Correction in hwx Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472830 Instable reACTION cycle time caused by rtiPWM and rtiDiv corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 474180 hwx description corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476035 Module documentation revised Data sheet V 1.05 Channel description changed: No Configuration description changed:No Firmware changed: No ID: 476110 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479340 Datatransfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.2.0.1: ID: 460565 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.2.0.0: ID: 455385 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455420 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455755 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.0.3.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.2.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.1.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(6), 1\58205a0.epl(123) Version 1.0.0.14: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(5), 1\58205a0.epl(123) Version 1.0.0.11: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.10: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.9: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.8: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration descriptionchanged: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.7: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.6: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.5: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed:Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.4: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.3: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.2: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.13.0.0 | * | 23/07/2021 | 4 MB | EXE | AS4_HW_X20CP1381-RT.exe | |
| Description |
V4.1 HW Upgrade (X20CP1381-RT) Revision information X20CP1381-RT-RT Version 1.13.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.12.0.0: ID: 704905 /Support ID: 400325418 POWERLINK: Operating mode "Ethernet" If a POWERLINK interface was operated in operating mode "Ethernet" and connected to a POWERLINK network in this mode, the interface could fail. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(14), 1\58205a0.epl(142) Version 1.11.1.0: ID: 664925 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 695250 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(14), 1\58205a0.epl(141) Version 1.11.0.0: ID: 673080 Additional status bit for rtiABRPos reference impulse loss An additional status bit was introduced, thatdetects the loss of the reference impulse signals. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 673095 The insufficient synchronization of the local inputs has been corrected. The local inputs are now delayed by 40ns. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(14), 1\58205a0.epl(141) Version 1.10.0.0: ID: 652300 POWERLINK: Possible failure of already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652395 Error correction: DNA tree topologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669155 Module documentation revised Data sheet V 1.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(141) Version 1.8.0.0: ID: 636540 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it canbe happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 636730 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(138) Version 1.7.0.0: ID: 591635 Correction of the functionality of the timestamp outputs Behavour of the timestamp Bit0 flags of CntTs and LatchTs outputs corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 603370 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINKCNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(12), 1\58205a0.epl(136) Version 1.6.2.0: ID: 569150 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.6.0.0: ID: 542565 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.5.0.0: ID: 529350 X20(c)CP138x-RTmodule documentation revised Data sheet V 1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 534325 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 536910 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.4.0.0: ID: 509635 Corrected FW concerning wrong length check of reACTION task Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(129) Version 1.3.2.0: ID: 497200 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware:1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.1.0: ID: 490225 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.0.0: ID: 472230 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472250 new FUB rtiRegister Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 472260 rtiDiv Runtime-Correction in hwx Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472830 Instable reACTION cycle time caused by rtiPWM and rtiDiv corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 474180 hwx description corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476035 Module documentation revised Data sheet V 1.05 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476110 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479340 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware:1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.2.0.1: ID: 460565 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.2.0.0: ID: 455385 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455420 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455755 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.0.3.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.2.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.1.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(6), 1\58205a0.epl(123) Version 1.0.0.14: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(5), 1\58205a0.epl(123) Version 1.0.0.11: ID: 358015 SupportX20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.10: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.9: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.8: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.7: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.6: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.5: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.4: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.3: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.2: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.12.0.0 | * | 08/04/2021 | 4 MB | EXE | AS4_HW_X20CP1381-RT.exe | |
| Description |
V4.1 HW Upgrade (X20CP1381-RT) Revision information X20CP1381-RT-RT Version 1.12.0.0: ID: 704905 / Support ID: 400325418 POWERLINK: Operating mode "Ethernet" If a POWERLINK interface was operated in operating mode "Ethernet" and connected to a POWERLINK network in this mode, the interface could fail. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(14), 1\58205a0.epl(142) Version 1.11.1.0: ID: 664925 Support data point StorageWear, wear level of storage medium starting fromARA4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 695250 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(14), 1\58205a0.epl(141) Version 1.11.0.0: ID:673080 Additional status bit for rtiABRPos reference impulse loss An additional status bit was introduced, that detects the loss of the referenceimpulse signals. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 673095 The insufficient synchronization of the local inputs has been corrected. The local inputs are now delayed by 40ns. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(14), 1\58205a0.epl(141) Version 1.10.0.0: ID: 652300 POWERLINK: Possible failure of already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID:652395 Error correction: DNA tree topologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669155 Module documentation revised Data sheet V 1.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(141) Version 1.8.0.0: ID: 636540 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 636730 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(138) Version 1.7.0.0: ID: 591635 Correction of the functionality of the timestamp outputs Behavour of the timestamp Bit0 flags of CntTs and LatchTsoutputs corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 603370 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(12), 1\58205a0.epl(136) Version 1.6.2.0: ID: 569150 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.6.0.0: ID: 542565 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed:No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.5.0.0: ID: 529350 X20(c)CP138x-RT module documentation revised Data sheet V 1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 534325 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 536910 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.4.0.0: ID: 509635 Corrected FW concerning wrong length check of reACTION task Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(129) Version 1.3.2.0: ID: 497200 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed:No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.1.0: ID: 490225 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.0.0: ID: 472230 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472250 new FUB rtiRegister Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 472260 rtiDiv Runtime-Correction in hwx Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472830 Instable reACTION cycle time caused by rtiPWM and rtiDiv corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 474180 hwx description corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476035 Module documentation revised Data sheet V 1.05 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476110 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479340 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.2.0.1: ID: 460565 Problems with HW-upgradefile corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.2.0.0: ID: 455385 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed:No Configuration description changed: No Firmware changed: Yes ID: 455420 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455755 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.0.3.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.2.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.1.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(6), 1\58205a0.epl(123) Version 1.0.0.14: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(5), 1\58205a0.epl(123) Version 1.0.0.11: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.10: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.9: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed:Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.8: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.7: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.6: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.5: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.4: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.3: ID:358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.2: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.11.0.0 | * | 28/01/2020 | 4 MB | EXE | AS4_HW_X20CP1381-RT.exe | |
| Description |
V4.1 HW Upgrade (X20CP1381-RT) Revision information X20CP1381-RT Version 1.11.0.0: ID: 673080 Additional status bit for rtiABRPos reference impulse loss An additional status bit was introduced, that detects the loss of the reference impulse signals. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 673095 The insufficient synchronization of the local inputshas been corrected. The local inputs are now delayed by 40ns. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(14), 1\58205a0.epl(141) Version 1.10.0.0: ID: 652300 POWERLINK: Possible failure of already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652395 Error correction: DNA tree topologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID:669155 Module documentation revised Data sheet V 1.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(141) Version 1.8.0.0: ID: 636540 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 636730 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13),1\58205a0.epl(138) Version 1.7.0.0: ID: 591635 Correction of the functionality of the timestamp outputs Behavour of the timestampBit0 flags of CntTs and LatchTs outputs corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 603370 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to bereceived from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(12), 1\58205a0.epl(136) Version 1.6.2.0: ID: 569150 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.6.0.0: ID: 542565 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.5.0.0: ID: 529350 X20(c)CP138x-RT module documentation revised Data sheet V 1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 534325 Correct setting of ETH-parameters when replacing theCPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 536910 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.4.0.0: ID: 509635 Corrected FW concerning wrong length check of reACTION task Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(129) Version 1.3.2.0: ID: 497200 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.1.0: ID: 490225 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.0.0: ID: 472230 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472250 new FUB rtiRegister Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 472260 rtiDiv Runtime-Correction in hwx Channel description changed: No Configuration description changed:No Firmware changed: No ID: 472830 Instable reACTION cycletime caused by rtiPWM and rtiDiv corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 474180 hwx description corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476035 Module documentation revised Data sheet V 1.05 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476110 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479340 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.2.0.1: ID: 460565 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.2.0.0: ID: 455385 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455420 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455755 Updateonline help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.0.3.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.2.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.1.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(6), 1\58205a0.epl(123) Version 1.0.0.14: ID: 358015 SupportX20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(5), 1\58205a0.epl(123) Version 1.0.0.11: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.10: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.9: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.8: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.7: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.6: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.5: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.4: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.3: ID: 358015 Support X20CP1381-RT Channeldescription changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.2: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.10.0.0 | * | 11/12/2019 | 4 MB | EXE | AS4_HW_X20CP1381-RT.exe | |
| Description |
V4.1 HW Upgrade (X20CP1381-RT) Revision information X20CP1381-RT Version 1.10.0.0: ID: 652300 POWERLINK: Possible failure of already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652395 Error correction: DNA tree topologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669155 Module documentation revised Data sheet V 1.23 Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(141) Version 1.8.0.0: ID: 636540 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 636730 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(138) Version 1.7.0.0: ID: 591635 Correction of the functionality of the timestamp outputs Behavour of the timestamp Bit0 flags of CntTs and LatchTs outputs corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 603370 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(12), 1\58205a0.epl(136) Version 1.6.2.0: ID: 569150 hwx modifications Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.6.0.0: ID: 542565 Configurable negative temperature displayrange Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.5.0.0: ID: 529350 X20(c)CP138x-RT module documentation revised Data sheet V 1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 534325 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 536910 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.4.0.0: ID: 509635 Corrected FW concerning wrong length check of reACTION task Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(129) Version 1.3.2.0: ID: 497200 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.1.0: ID: 490225 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.0.0: ID: 472230 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472250 new FUB rtiRegister Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 472260 rtiDiv Runtime-Correction in hwx Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472830 Instable reACTION cycle time caused by rtiPWM and rtiDiv corrected Channel description changed:No Configuration description changed: No Firmware changed: Yes ID: 474180 hwx description corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476035 Module documentation revised Data sheet V 1.05 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476110 Reduced CAN susceptibility todisturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479340 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.2.0.1: ID: 460565 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.2.0.0: ID: 455385 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455420 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455755 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.0.3.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.2.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.1.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(6), 1\58205a0.epl(123) Version 1.0.0.14: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(5),1\58205a0.epl(123) Version 1.0.0.11: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.10: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration descriptionchanged: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.9: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.8: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.7: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed:Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.6: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.5: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.4: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.3: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.2: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.8.0.0 | * | 21/05/2019 | 4 MB | EXE | AS4_HW_X20CP1381-RT.exe | |
| Description |
V4.1 HW Upgrade (X20CP1381-RT) Revision information X20CP1381-RT Version 1.8.0.0: ID: 636540 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 636730 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(13), 1\58205a0.epl(138) Version 1.7.0.0: ID: 591635 Correction of the functionality of the timestamp outputs Behavour of the timestamp Bit0 flags of CntTs and LatchTs outputs corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 603370 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(12), 1\58205a0.epl(136) Version 1.6.2.0: ID: 569150 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.6.0.0: ID: 542565 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.5.0.0: ID: 529350 X20(c)CP138x-RT module documentation revised Data sheet V 1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 534325 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 536910 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.4.0.0: ID: 509635 Corrected FW concerning wrong length check of reACTION task Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(129) Version 1.3.2.0: ID: 497200 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.1.0: ID:490225 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.0.0: ID: 472230 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472250 new FUB rtiRegister Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 472260 rtiDiv Runtime-Correction in hwx Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472830 Instable reACTION cycle time caused by rtiPWM and rtiDiv corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 474180 hwx description corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476035 Module documentation revised Data sheet V 1.05 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476110 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479340 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.2.0.1: ID:460565 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.2.0.0: ID: 455385 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455420 Reduced X2X susceptibility to disturbances Channel description changed: No Configurationdescription changed: No Firmware changed: Yes ID: 455755 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8),1\58205a0.epl(129) Version 1.0.3.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.2.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.1.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(6), 1\58205a0.epl(123) Version 1.0.0.14: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(5), 1\58205a0.epl(123) Version 1.0.0.11: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.10: ID: 358015 SupportX20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.9: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.8: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.7: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.6: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.5: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.4: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.3: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.2: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.7.0.0 | * | 06/09/2018 | 4 MB | EXE | AS4_HW_X20CP1381-RT.exe | |
| Description |
V4.1 HW Upgrade (X20CP1381-RT) Revision information X20CP1381-RT Version 1.7.0.0: ID: 591635 Correction of the functionality ofthe timestamp outputs Behavour of the timestamp Bit0 flags of CntTs and LatchTs outputs corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 603370 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physicallypresent in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(12), 1\58205a0.epl(136) Version 1.6.2.0: ID: 569150 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.6.0.0: ID: 542565 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version1.5.0.0: ID: 529350 X20(c)CP138x-RT module documentation revised Data sheet V 1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 534325 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 536910 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(131) Version 1.4.0.0: ID: 509635 Corrected FW concerning wrong length check of reACTION task Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(129) Version1.3.2.0: ID: 497200 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.1.0: ID: 490225 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.0.0: ID: 472230 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472250 new FUB rtiRegister Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 472260 rtiDiv Runtime-Correction in hwx Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472830 Instable reACTION cycle time caused by rtiPWM and rtiDiv corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 474180 hwx description corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476035 Module documentation revised Data sheet V 1.05 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476110 Reduced CAN susceptibility to disturbances Channeldescription changed: No Configuration description changed: No Firmware changed: Yes ID: 479340 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.2.0.1: ID: 460565 Problems with HW-upgrade file corrected Channel description changed: No Configurationdescription changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.2.0.0: ID: 455385 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455420 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455755 Update online help Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.0.3.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.2.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.1.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(6), 1\58205a0.epl(123) Version 1.0.0.14: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(5), 1\58205a0.epl(123) Version 1.0.0.11: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.10: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.9: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version1.0.0.8: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.7: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.6: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.5: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.4: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.3: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.2: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.4.0.0 | * | 28/06/2017 | 4 MB | EXE | AS4_HW_X20CP1381-RT.exe | |
| Description |
V4.1 HW Upgrade (X20CP1381-RT) Revision information X20CP1381-RT Version 1.4.0.0: ID: 509635 Corrected FW concerning wrong length check of reACTION task Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(11), 1\58205a0.epl(129) Version 1.3.2.0: ID: 497200 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.1.0: ID: 490225 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.3.0.0: ID: 472230 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472250 new FUB rtiRegister Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 472260 rtiDiv Runtime-Correction in hwx Channel description changed: No Configuration description changed: No Firmware changed: No ID: 472830 Instable reACTION cycle time caused by rtiPWM and rtiDiv corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 474180 hwx description corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476035 Module documentation revised Data sheet V 1.05 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476110 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479340 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(10), 1\58205a0.epl(129) Version 1.2.0.1: ID: 460565 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.2.0.0: ID: 455385 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455420 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455755 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(8), 1\58205a0.epl(129) Version 1.0.3.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.2.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) Version 1.0.1.0: ID: 358015 Support X20CP1381-RT Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(6), 1\58205a0.epl(123) Version 1.0.0.14: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(5), 1\58205a0.epl(123) Version 1.0.0.11: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.10: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.9: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.8: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.7: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(4), 1\58205a0.epl(123) Version 1.0.0.6: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.5: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.4: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.3: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) Version 1.0.0.2: ID: 358015 Support X20CP1381-RT Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\58205_0.pci(3), 1\58205a0.epl(123) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.1.0.0 | * | 19/10/2015 | 4 MB | EXE | AS4_HW_X20CP1381-RT.exe | |
| Description |
V4.1 HW Upgrade (X20CP1381-RT) Revision information X20CP1381-RT Version 1.1.0.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No ID: 443590 Support Bondingfeature Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443610 / Support ID: 400138730 POWERLINK V2: "Controlled node" mode In networks with heavy SoC jitter, the dropping out of an SoC sometimes caused a permanent freezing of the input data on the controlled node. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID:443630 / Support ID: 400150240 POWERLINK V2: "Controlled node" mode After a POWERLINK manager failed, the controlled node sometimes registered with an incorrect NMT status in the ident response. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58205_0.pci(7), 1\58205a0.epl(128) Version 1.0.3.0: ID: 434330 / Support ID: 400152273 hwx-file correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58205_0.pci(7), 1\58205a0.epl(123) |
|||||
