DWL@DWL10000315507
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 1.6.2.0 | * | 06/09/2023 | 3 Mo | EXE | AS4_HW_X20cAI2438.exe | |
| Description |
V4.0 HW Upgrade (X20cAI2438) Revision information X20cAI2438 Version 1.6.2.0: ID: 775195 Replacement of the interfacecard in AS Replace HW Modul" works correktly Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(130) Version 1.6.0.0: ID: 764115 / Support ID: 400394118 Fix: X20AI2438, X20AO2438: within HART 7 DTM used extended commands failed. If the extendend commands format was used, the modules returned a timeout error message. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 765410 Error correction of the hwx file There was an error, that the filter of InputMTU_UIF and OutputMTU_UIF had the incorrect filter value. As effect of that the OCTET datapoints wheren´t visible, Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\57838_2.fw(130) Version 1.5.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.4.0.0: ID: 719005 Adaptation of the configuration description Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 720910 Product improvement Corrected error response in connection with the ASHart library Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\57838_2.fw(120) Version 1.3.0.0: ID: 678660 Adaptations for fieldbus support in AS4. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 711220 New documentation 1.32 available Channel description changed: No Configuration description changed: No Firmware changed: No ID: 711265 / Support ID: 400295421 Product improvement Improved behavior in the event of interference with the carrier detect signal. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\57838_2.fw(110) Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.1.0: ID: 603829 APROL: Missing attribute for channel-parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.1.0.0: ID: 562730 / Support ID: 400231500 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571630 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.0.8.1: ID: 520405 De-/Activation of subtitution mode revised The feature "subtitution mode" can be deactivated completely. Channel description changed: Yes Configuration descriptionchanged: No Firmware changed: No ID: 520640 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.7.0: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer aswell. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID:499425 Module documentation revised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503185 Correction of Ecad data (EPlan) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.6.5: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.3: ID: 402930 / Support ID: 400142019 Multiplexed mode revised FIO datapionts for multiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.2: ID: 297620 Support X20cAI2438 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.6.0.0 | * | 15/02/2023 | 3 Mo | EXE | AS4_HW_X20cAI2438.exe | |
| Description |
V4.0 HW Upgrade (X20cAI2438) Revision information X20cAI2438 Version 1.6.0.0: ID: 764115 / Support ID: 400394118 Fix: X20AI2438, X20AO2438: within HART 7 DTM used extended commands failed. If the extendend commands format was used, the modules returned a timeout error message. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 765410 Error correction of the hwx file There was an error, that the filter of InputMTU_UIF and OutputMTU_UIF had the incorrect filter value. As effect of that the OCTET datapoints wheren´t visible, Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\57838_2.fw(130) Version 1.5.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.4.0.0: ID: 719005 Adaptation of the configuration description Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 720910 Product improvement Corrected error response in connection with the ASHart library Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware:1\57838_2.fw(120) Version 1.3.0.0: ID: 678660 Adaptations for fieldbus support in AS4. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 711220 New documentation 1.32 available Channel description changed: No Configuration description changed: No Firmware changed: No ID: 711265 / Support ID: 400295421 Product improvement Improved behavior in the event of interference with the carrier detect signal. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\57838_2.fw(110) Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.1.0: ID: 603829 APROL: Missing attribute for channel-parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.1.0.0: ID: 562730 / Support ID: 400231500 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571630 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.0.8.1: ID: 520405 De-/Activation of subtitution mode revised The feature "subtitution mode" can be deactivated completely. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 520640 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.7.0: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentationrevised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503185 Correction of Ecad data (EPlan) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.6.5: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.3: ID: 402930 / Support ID: 400142019 Multiplexed mode revised FIO datapionts for multiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.2: ID: 297620 Support X20cAI2438 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.5.0.0 | * | 23/07/2021 | 2 Mo | EXE | AS4_HW_X20cAI2438.exe | |
| Description |
V4.0 HW Upgrade (X20cAI2438) Revision information X20cAI2438 Version 1.5.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.4.0.0: ID: 719005 Adaptation of the configuration description Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 720910 Product improvement Corrected error response in connectionwith the ASHart library Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\57838_2.fw(120) Version 1.3.0.0: ID: 678660 Adaptations for fieldbus support in AS4. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 711220 Newdocumentation 1.32 available Channel description changed: No Configuration description changed: No Firmware changed: No ID: 711265 / Support ID: 400295421 Product improvement Improved behavior in theevent of interference with the carrier detect signal. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\57838_2.fw(110) Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.1.0: ID: 603829 APROL: Missing attribute for channel-parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.1.0.0: ID: 562730 / Support ID: 400231500 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571630 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.0.8.1: ID:520405 De-/Activation of subtitution mode revised The feature "subtitution mode" can be deactivated completely. Channel description changed:Yes Configuration description changed: No Firmware changed: No ID: 520640 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.7.0: ID: 492165 DTM diagnose revised DTM diagnosis function canbe used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503185 Correction of Ecad data (EPlan) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.6.5: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.3: ID: 402930 / Support ID: 400142019 Multiplexed mode revised FIO datapionts for multiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.2: ID: 297620 Support X20cAI2438 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.4.0.0 | * | 01/04/2021 | 2 Mo | EXE | AS4_HW_X20cAI2438.exe | |
| Description |
V4.0 HW Upgrade (X20cAI2438) Revision information X20cAI2438 Version 1.4.0.0: ID: 719005 Adaptation of the configuration description Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 720910 Product improvement Corrected error response in connection with the ASHart library Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\57838_2.fw(120) Version 1.3.0.0: ID: 678660 Adaptations for fieldbus support in AS4. Channeldescription changed: No Configuration description changed: Yes Firmware changed: No ID: 711220 New documentation 1.32 available Channel description changed: No Configuration description changed: No Firmware changed: No ID: 711265 / Support ID: 400295421 Product improvement Improved behavior in the event of interference with the carrier detect signal. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\57838_2.fw(110) Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.1.0: ID: 603829 APROL: Missing attribute for channel-parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.1.0.0: ID: 562730 / Support ID: 400231500 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571630 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.0.8.1: ID: 520405 De-/Activation of subtitution mode revised The feature "subtitution mode" can be deactivated completely. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 520640 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.7.0: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist ofmodule (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503185 Correction of Ecad data (EPlan) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.6.5: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.3: ID: 402930 / Support ID: 400142019 Multiplexed mode revised FIO datapionts for multiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.2: ID: 297620 Support X20cAI2438 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.3.0.0 | * | 17/02/2021 | 2 Mo | EXE | AS4_HW_X20cAI2438.exe | |
| Description |
V4.0 HW Upgrade (X20cAI2438) Revision information X20cAI2438 Version 1.3.0.0: ID: 678660 Adaptations for fieldbus support in AS4. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 711220 New documentation 1.32 available Channel description changed: No Configuration description changed: No Firmware changed: No ID: 711265 / Support ID: 400295421 Product improvement Improved behavior in the event of interference with the carrier detect signal. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\57838_2.fw(110) Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.1.0: ID: 603829 APROL: Missing attribute for channel-parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.1.0.0: ID: 562730 / Support ID: 400231500 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571630 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.0.8.1: ID: 520405 De-/Activation of subtitution mode revised The feature "subtitution mode" can be deactivated completely. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 520640 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.7.0: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclicdata transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shownin livelist of module (required AR: B4.25 or higher) Channel descriptionchanged: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503185 Correction of Ecad data (EPlan) Channel description changed: No Configuration descriptionchanged: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.6.5: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The userdefined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.3: ID: 402930 / Support ID: 400142019 Multiplexed mode revised FIO datapionts for multiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.2: ID: 297620 Support X20cAI2438 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.2.0.0 | * | 25/10/2019 | 2 Mo | EXE | AS4_HW_X20cAI2438.exe | |
| Description |
V4.0 HW Upgrade (X20cAI2438) Revision information X20cAI2438 Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.1.0: ID: 603829 APROL:Missing attribute for channel-parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 1\57838_2.fw(100) Version 1.1.0.0: ID: 562730 / Support ID: 400231500 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571630 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration descriptionchanged: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.0.8.1: ID: 520405 De-/Activation of subtitution mode revised The feature "subtitution mode" can be deactivated completely. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 520640 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.7.0: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503185 Correction of Ecad data (EPlan) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.6.5: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheetV1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.3: ID: 402930 / Support ID: 400142019 Multiplexed moderevised FIO datapionts for multiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.2: ID: 297620 Support X20cAI2438 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.1.1.0 | * | 19/07/2018 | 2 Mo | EXE | AS4_HW_X20cAI2438.exe | |
| Description |
V4.0 HW Upgrade (X20cAI2438) Revision information X20cAI2438 Version 1.1.1.0: ID: 603829 APROL: Missing attribute for channel-parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.1.0.0: ID: 562730 / Support ID: 400231500 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571630 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.0.8.1: ID: 520405 De-/Activation of subtitution mode revised The feature "subtitution mode" can be deactivated completely. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 520640 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.7.0: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503185 Correction of Ecad data (EPlan) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.6.5: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.3: ID: 402930/ Support ID: 400142019 Multiplexed mode revised FIO datapionts formultiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.2: ID: 297620 Support X20cAI2438 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.1.0.0 | * | 09/01/2018 | 2 Mo | EXE | AS4_HW_X20cAI2438.exe | |
| Description |
V4.0 HW Upgrade (X20cAI2438) Revision information X20cAI2438 Version 1.1.0.0: ID: 562730 / Support ID: 400231500 Improved resetbehavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571630 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.0.8.1: ID: 520405 De-/Activation of subtitution mode revised The feature "subtitution mode" can be deactivated completely. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 520640 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.7.0: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Supportfor module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503185 Correction of Ecad data (EPlan) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version1.0.6.5: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.3: ID: 402930 / Support ID: 400142019 Multiplexed mode revised FIO datapionts for multiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.2: ID: 297620 Support X20cAI2438 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) |
|||||
