DWL@DWL10000293335
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 1.3.0.0 | * | 23/07/2021 | 757 Ko | EXE | AS4_HW_X20AO2437.exe | |
| Description |
V4.0 HW Upgrade (X20AO2437) Revision information X20AO2437 Version 1.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: 655865 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 656110 Module documentation revised Data sheet V 1.31 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(110) Version 1.0.7.1: ID: 504495 Configuration for SGC CPUs revised. Parameter download for SGC-CPUs enabled. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.7.0: ID: 497060 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503610 Ecad data (EPlan) corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.6.5: ID: 497060 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.4.0: ID: 366239 Adaption for usage in APROL Classify Channel "OSPValid" as Sig_St_Bool. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 369860 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) -Adaption of Descriptions and order of registers (IO-Mapping) Channel description changed: Yes Configuration description changed: No Firmwarechanged: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.3.1: ID: 366239 Adaption for usage in APROL Classify Channel "OSPValid" as Sig_St_Bool. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 369860 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and order of registers (IO-Mapping) Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.2.1: ID: 342995 Signal types for Aprol corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 348070 OSP; system requirements Minimum system requirements for functionmodell "OSP" are mentioned. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.2.0: ID: 342995 Signal types for Aprol corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 348070 OSP; system requirements Minimum system requirements for functionmodell "OSP" are mentioned. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.1.6: ID: 309005 Additional function model "OSP mode" OSP - Output Set Predefined InOSP mode, the user defines the output behavior in case of connection loss between PLC and module. In doing so the power supply of the module must be assured. Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 313040 Modification for CANIO Configuration is adapted for service on CANIO buscontroller Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.0.3: ID: 297940 Support X20AO2437 Support for AutomationStudio incl. documentation Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(51) Version 1.0.0.1: ID: 299070 Support X20AO2437 Support for AutomationStudio incl. documentation (german) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(51) Version 1.0.0.0: ID: 257500 Support X20AO2437 Support for AutomationStudio Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\46980_1.fw(82), 1\46981_1.fw(20), 1\46981_2.fw(51) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.2.0.0 | * | 25/10/2019 | 754 Ko | EXE | AS4_HW_X20AO2437.exe | |
| Description |
V4.0 HW Upgrade (X20AO2437) Revision information X20AO2437 Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: 655865 Improvedreset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 656110 Module documentation revised Data sheet V 1.31 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(110) Version 1.0.7.1: ID:504495 Configuration for SGC CPUs revised. Parameter download for SGC-CPUs enabled. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.7.0: ID: 497060 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503610 Ecad data (EPlan) corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.6.5: ID: 497060 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.4.0: ID: 366239 Adaption for usage in APROL Classify Channel "OSPValid" as Sig_St_Bool. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID:369860 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and order of registers (IO-Mapping) Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.3.1: ID: 366239 Adaption for usage in APROL Classify Channel "OSPValid" as Sig_St_Bool. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 369860 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and order of registers (IO-Mapping) Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.2.1: ID: 342995 Signal types for Aprol corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 348070 OSP; system requirements Minimum system requirements for functionmodell "OSP" are mentioned. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.2.0: ID: 342995 Signal types for Aprol corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 348070 OSP; system requirements Minimum system requirements for functionmodell "OSP" are mentioned. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.1.6: ID: 309005 Additional function model "OSP mode" OSP - Output Set Predefined In OSP mode, the user defines the output behavior in case of connection loss between PLC and module. In doingso the power supply of the module must be assured. Channel description changed: Yes Configuration description changed: Yes Firmware changed:Yes ID: 313040 Modification for CANIO Configuration is adapted for service on CANIO buscontroller Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.0.3: ID:297940 Support X20AO2437 Support for AutomationStudio incl. documentation Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(51) Version 1.0.0.1: ID: 299070 Support X20AO2437 Support for AutomationStudio incl. documentation (german) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(51) Version 1.0.0.0: ID: 257500 Support X20AO2437 Support for AutomationStudio Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\46980_1.fw(82), 1\46981_1.fw(20), 1\46981_2.fw(51) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.1.0.0 | * | 04/09/2019 | 754 Ko | EXE | AS4_HW_X20AO2437.exe | |
| Description |
V4.0 HW Upgrade (X20AO2437) Revision information X20AO2437 Version 1.1.0.0: ID: 655865 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 656110 Module documentation revised Data sheet V 1.31 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(110) Version 1.0.7.1: ID: 504495 Configuration for SGC CPUs revised. Parameter download for SGC-CPUs enabled. Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.7.0: ID: 497060 Module documentation revised Data sheetV 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503610 Ecad data (EPlan)corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.6.5: ID: 497060 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.4.0: ID: 366239 Adaption for usage in APROL Classify Channel "OSPValid" as Sig_St_Bool. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 369860 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and order of registers (IO-Mapping) Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.3.1: ID: 366239 Adaption for usage in APROL Classify Channel "OSPValid" as Sig_St_Bool. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 369860 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and order of registers (IO-Mapping) Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.2.1: ID: 342995 Signal types for Aprol corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 348070 OSP; system requirements Minimum system requirements for functionmodell "OSP" are mentioned. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.2.0: ID: 342995 Signal types for Aprol corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 348070 OSP; system requirements Minimum system requirements for functionmodell "OSP" are mentioned. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.1.6: ID: 309005 Additional function model "OSP mode" OSP - Output Set Predefined In OSP mode, the user defines the output behavior in case of connection loss between PLC and module. In doing so the power supply of the module must be assured. Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 313040 Modification for CANIO Configuration is adapted for service on CANIO buscontroller Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.0.3: ID: 297940 Support X20AO2437 Support for AutomationStudio incl. documentation Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(51) Version 1.0.0.1: ID: 299070 Support X20AO2437 Support for AutomationStudio incl. documentation (german) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(51) Version 1.0.0.0: ID: 257500 Support X20AO2437 Support for AutomationStudio Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\46980_1.fw(82), 1\46981_1.fw(20), 1\46981_2.fw(51) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.0.7.1 | * | 27/10/2016 | 767 Ko | EXE | AS4_HW_X20AO2437.exe | |
| Description |
V4.0 HW Upgrade (X20AO2437) Revision information X20AO2437 Version 1.0.7.1: ID: 504495 Configuration for SGC CPUs revised. Parameter download for SGC-CPUs enabled. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.7.0: ID:497060 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503610 Ecad data (EPlan) corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.6.5: ID: 497060 Module documentation revised Datasheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.4.0: ID: 366239 Adaption for usage in APROL Classify Channel "OSPValid" as Sig_St_Bool. Channel description changed: Yes Configuration description changed: No Firmwarechanged: No ID: 369860 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and order of registers (IO-Mapping) Channel descriptionchanged: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.3.1: ID: 366239 Adaption for usage in APROL Classify Channel "OSPValid" as Sig_St_Bool. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 369860 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and order of registers (IO-Mapping) Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20),1\46981_2.fw(61) Version 1.0.2.1: ID: 342995 Signal types for Aprol corrected Channel description changed: Yes Configurationdescription changed: No Firmware changed: No ID: 348070 OSP; system requirements Minimum system requirements for functionmodell "OSP" are mentioned. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.2.0: ID: 342995 Signal types for Aprol corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 348070 OSP; system requirements Minimum system requirements for functionmodell "OSP" are mentioned. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.1.6: ID: 309005 Additional function model "OSP mode" OSP - Output Set Predefined In OSP mode, the user defines the output behavior in case of connection loss between PLCand module. In doing so the power supply of the module must be assured. Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 313040 Modification for CANIO Configuration is adapted for service on CANIO buscontroller Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(61) Version 1.0.0.3: ID: 297940 Support X20AO2437 Support for AutomationStudio incl. documentation Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(51) Version 1.0.0.1: ID: 299070 Support X20AO2437 Support for AutomationStudio incl. documentation (german) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46981_1.fw(20), 1\46981_2.fw(51) Version 1.0.0.0: ID: 257500 Support X20AO2437 Support for AutomationStudio Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\46980_1.fw(82), 1\46981_1.fw(20), 1\46981_2.fw(51) |
|||||
