DWL@DWL10000292364
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 2.1.0.0 | * | 19/12/2023 | 626 KB | EXE | AS4_HW_5AC901.I485-00.exe | |
| Description |
V4.0 HW Upgrade (5AC901.I485-00) Revision information 5AC901.I485-00 Version 2.1.0.0: ID: 778700 Support for the APC4100 product series starting with AS6/AR6. With this version the IF option can be connected and used with an Automation PC 4100. Channel description changed:No Configuration description changed: Yes Firmware changed: No Version 2.0.2.0: ID: 603899 Enhancements for Aprol. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 650390 Support for IOMapping (ModuleOK) and Module Supervised Channel description changed: Yes Configurationdescription changed: Yes Firmware changed: No Version 2.0.1.0: ID: 592975 Support for the xPC3100 With this version the IF option can be connected and used with an Automation PC 3100 or to a Panel PC 3100. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 566580 Preperation to support the B&R Hypervisor The B&R Hypervisor is supported with Automation Studio version V4.4. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.1.2: ID: 368345 / Support ID: 400117096 5AC901.I485-00 can be used in both IF option slots It is with the following versions of Automation Runtime possible to use oneor two modules of type 5AC901.I485-00 at Automation PC 910 or Panel PC 900: U4.02; F4.05; I4.06; H4.08. EPLAN-Data added. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.1: ID: 350840 Automation Studio 3.0.90: Adaptation of the parameters. Automation Studio 4.0: Error text correction. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 350840 Support for 5AC901.I455-00 The option module 5AC901.I485-00 can only be inserted at SS2 slot (See alsothe corresponding user manual "IF Option 2"). Note: The module can be operated only from Automation Studio version 3.0.90 or Automation Studio version 4.0.16. Channel description changed: No Configuration description changed: No Firmware changed: No |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.0.2.0 | * | 25/07/2019 | 306 KB | EXE | AS4_HW_5AC901.I485-00.exe | |
| Description |
V4.0 HW Upgrade (5AC901.I485-00) Revision information 5AC901.I485-00 Version 2.0.2.0: ID: 603899 Enhancements for Aprol. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 650390 Support for IOMapping (ModuleOK) and Module Supervised Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Version 2.0.1.0: ID: 592975 Support for the xPC3100 With this version the IF option can be connected and used with an Automation PC 3100 or to a Panel PC3100. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 566580 Preperation to support the B&R Hypervisor The B&R Hypervisor is supported with Automation Studio version V4.4. Channel description changed:No Configuration description changed: Yes Firmware changed: No Version 1.0.1.2: ID: 368345 / Support ID: 400117096 5AC901.I485-00 can be used in both IF option slots It is with the following versions of Automation Runtime possible to use oneor two modules of type 5AC901.I485-00 at Automation PC 910 or Panel PC 900: U4.02; F4.05; I4.06; H4.08. EPLAN-Data added. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.1: ID: 350840 Automation Studio 3.0.90: Adaptation of the parameters. Automation Studio 4.0: Error text correction. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 350840 Support for 5AC901.I455-00 The option module 5AC901.I485-00 can only be inserted at SS2 slot (See alsothecorresponding user manual "IF Option 2"). Note: The module can be operatedonly from Automation Studio version 3.0.90 orAutomation Studio version 4.0.16. Channel description changed: No Configuration description changed: No Firmware changed: No |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.0.1.0 | * | 30/05/2018 | 506 KB | EXE | AS4_HW_5AC901.I485-00.exe | |
| Description |
V4.0 HW Upgrade (5AC901.I485-00) Revision information 5AC901.I485-00 Version 2.0.1.0: ID: 592975 Support for the xPC3100 With this version the IF option can be connected and used with an Automation PC3100 or to a Panel PC 3100. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: Preperation to support the B&R Hypervisor The B&R Hypervisor is supported with Automation Studio version V4.4. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.1.2: ID: 368345 / Support ID: 400117096 5AC901.I485-00 can be used in both IF option slots It is with the following versions of Automation Runtime possible to use oneor two modules of type 5AC901.I485-00 at Automation PC 910 or Panel PC 900: U4.02; F4.05; I4.06; H4.08. EPLAN-Data added. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.1: ID: 350840 Automation Studio 3.0.90: Adaptation of the parameters. Automation Studio 4.0: Error text correction. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 350840 Support for 5AC901.I455-00 The option module 5AC901.I485-00 can only be inserted at SS2 slot (See alsothe corresponding user manual "IF Option 2"). Note: The module can be operated only from Automation Studio version 3.0.90 or Automation Studio version 4.0.16. Channel description changed: No Configuration description changed: No Firmware changed: No |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.0.1.2 | * | 04/06/2014 | 578 KB | EXE | AS4_HW_5AC901.I485-00.exe | |
| Description |
V4.0 HW Upgrade (5AC901.I485-00) Revision information 5AC901.I485-00 Version 1.0.1.2: ID: 368345 / Support ID: 400117096 5AC901.I485-00 can be used in both IF option slots It is with the following versions of Automation Runtime possible to use oneor two modules of type 5AC901.I485-00 at Automation PC 910 or Panel PC 900: U4.02; F4.05; I4.06; H4.08. EPLAN-Data added. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.1: ID: 350840 Automation Studio 3.0.90: Adaptation of the parameters. Automation Studio 4.0: Error text correction. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 350840 Support for 5AC901.I455-00 The option module 5AC901.I485-00 can only be inserted at SS2 slot (See alsothe corresponding user manual "IF Option 2"). Note: The module can be operated only from Automation Studio version 3.0.90 or Automation Studio version 4.0.16. Channel description changed: No Configuration description changed: No Firmware changed: No |
|||||
