DWL@DWL10000345550
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 1.8.4.0 | * | 25/04/2019 | 4 MB | EXE | AS2.6_HW_X20AI1744.exe | |
| Description |
V2.7 HW Upgrade (X20AI1744) Revision information X20AI1744 Version 1.8.4.0: ID: 639690 Module documentation revised Data sheet V 4.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.8.3.0: ID: 603789 APROL: missing attribute for channel-parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.8.2.0: ID: 560910 Module documentation revised Data sheet V 4.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.8.1.0: ID: 560910 Module documentation revised Datasheet V 4.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.8.0.0: ID: 531180 Module documentation revised Data sheet V 4.20 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 535280 / Support ID: 400219044 Synchronization does not work In synchronous mode can it happen, the A / D converter could not synchronize to the X2X. Channel description changed: No Configuration description changed:No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.7.0.0: ID: 501875 Module documentation revised Datasheet V 4.11 Channel description changed: No Configurationdescription changed: No Firmware changed: No ID: 512595 Error value corrected In case "invalid value", the analog input shows the documented error value Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(130) Version 1.6.0.0: ID: 497325 Modules of revision> = H0 were not backward compatible in mode multisample. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(111) Version 1.5.0.0: ID: 475115 Documentation revised. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 485955 Correction - new firmware for hardware version 3 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(110) Version 1.4.0.0: ID: 467580 support HW-Variante 3 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(100) Version 1.3.0.2: ID: 423695 HW file spellcheck Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9) Version 1.3.0.1: ID: 359760 englisch documentation updated Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9) Version 1.3.0.0: ID: 345275 / Support ID: 400109127 Improved method for prevention of mutual measurement interference by adjacent modules Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 351330 Extensions in function model multisampling Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(9) Version 1.2.5.0: ID: 328534 Incorrect entry of AnalogInput01 resolved Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.3.0: ID: 261660 Changes for AS3.0.90 Channel description changed: No Configurationdescription changed: No Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.2.0: ID: 256670 Extensions for AS 3.0.90 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.1.0: ID: 243660 / Support ID: 400054723 Value of the X20AI1744 isoscillating if several X20AI1744 are plugged side by side Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(6) Version 1.2.0.0: ID: 256630 New function model (multisample) Channel description changed: No Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(5) Version 1.1.0.0: ID: 256635 Extension of the gain-range: 2mV/V bis 256mV/V Channel description changed: No Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(4) Version 1.0.2.0: ID: 217820 / Support ID: 400032817 It last up to 40sec until the ADC is in synchronous mode Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(3) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.8.3.0 | * | 18/07/2018 | 4 MB | EXE | AS2.6_HW_X20AI1744.exe | |
| Description |
V2.7 HW Upgrade (X20AI1744) Revision information X20AI1744 Version 1.8.3.0: ID: 603789 APROL: missing attribute for channel-parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.8.2.0: ID: 560910 Module documentation revised Data sheet V 4.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.8.1.0: ID: 560910 Module documentation revised Data sheet V 4.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.8.0.0: ID: 531180 Module documentation revised Datasheet V 4.20 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 535280 / Support ID: 400219044 Synchronization does not work In synchronous mode can it happen, the A / D converter could not synchronize to the X2X. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.7.0.0: ID: 501875 Module documentation revised Datasheet V 4.11 Channel description changed: No Configuration description changed:No Firmware changed: No ID: 512595 Error value corrected In case "invalid value", the analog input shows the documented error value Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(130) Version 1.6.0.0: ID: 497325 Modules of revision> = H0 were not backward compatible in mode multisample. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(111) Version 1.5.0.0: ID: 475115 Documentation revised. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 485955 Correction - new firmware for hardware version 3 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(110) Version1.4.0.0: ID: 467580 support HW-Variante 3 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(100) Version 1.3.0.2: ID: 423695 HW file spellcheck Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9) Version 1.3.0.1: ID: 359760 englisch documentation updated Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9) Version 1.3.0.0: ID: 345275 / Support ID: 400109127 Improved method for prevention of mutual measurement interference by adjacent modules Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 351330 Extensions in function model multisampling Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(9) Version 1.2.5.0: ID: 328534 Incorrect entry of AnalogInput01 resolved Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.3.0: ID: 261660 Changes for AS3.0.90 Channel description changed: No Configuration description changed:No Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.2.0: ID: 256670 Extensions for AS 3.0.90 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.1.0: ID: 243660 / Support ID: 400054723 Value of the X20AI1744 is oscillating if several X20AI1744 are plugged sideby side Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(6) Version 1.2.0.0: ID: 256630 New function model (multisample) Channel description changed: No Configurationdescription changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(5) Version 1.1.0.0: ID: 256635 Extension of the gain-range: 2mV/V bis 256mV/V Channel description changed: No Configurationdescription changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(4) Version 1.0.2.0: ID: 217820 / Support ID: 400032817 It last up to 40sec until the ADC is in synchronous mode Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(3) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.8.2.0 | * | 03/05/2018 | 4 MB | EXE | AS2.6_HW_X20AI1744.exe | |
| Description |
V2.7 HW Upgrade (X20AI1744) Revision information X20AI1744 Version 1.8.2.0: ID: 560910 Module documentation revised Data sheet V 4.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.8.1.0: ID: 560910 Module documentation revised Data sheet V 4.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.8.0.0: ID: 531180 Module documentation revised Data sheet V 4.20 Channel descriptionchanged: No Configuration description changed: No Firmware changed:No ID: 535280 / Support ID: 400219044 Synchronization does not work In synchronous mode can it happen, the A / D converter could not synchronize to the X2X. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.7.0.0: ID: 501875 Module documentation revised Datasheet V 4.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 512595 Error value corrected In case "invalid value", the analog input shows the documented error value Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(130) Version 1.6.0.0: ID: 497325 Modules of revision> = H0 were not backward compatible in mode multisample. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(111) Version 1.5.0.0: ID: 475115 Documentation revised. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 485955 Correction - new firmware for hardware version 3 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(110) Version 1.4.0.0: ID: 467580 support HW-Variante 3 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(100) Version 1.3.0.2: ID: 423695 HW file spellcheck Channel description changed: Yes Configuration descriptionchanged: No Firmware changed: No Firmware: 1\7390_2.fw(9) Version 1.3.0.1: ID: 359760 englisch documentation updated Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9) Version 1.3.0.0: ID: 345275 / Support ID: 400109127 Improved method for prevention of mutual measurement interference by adjacent modules Channel descriptionchanged: No Configuration description changed: Yes Firmware changed: Yes ID: 351330 Extensions in function model multisampling Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(9) Version 1.2.5.0: ID: 328534 Incorrect entry of AnalogInput01 resolved Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.3.0: ID: 261660 Changes for AS3.0.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.2.0: ID: 256670 Extensions for AS 3.0.90 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.1.0: ID: 243660 / Support ID: 400054723 Value of the X20AI1744 is oscillating if several X20AI1744 are plugged sideby side Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(6) Version 1.2.0.0: ID: 256630 New function model (multisample) Channel description changed: No Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(5) Version 1.1.0.0: ID: 256635 Extension of the gain-range: 2mV/V bis 256mV/V Channel description changed: No Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(4) Version 1.0.2.0: ID: 217820 / Support ID: 400032817 It last up to 40sec until the ADC is in synchronous mode Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(3) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.8.0.0 | * | 12/06/2017 | 4 MB | EXE | AS2.6_HW_X20AI1744.exe | |
| Description |
V2.7 HW Upgrade (X20AI1744) Revision information X20AI1744 Version 1.8.0.0: ID: 531180 Module documentation revised Data sheet V 4.20 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 535280 / Support ID: 400219044 Synchronization does not work In synchronous mode can it happen, the A / D converter could not synchronize to the X2X. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(140) Version 1.7.0.0: ID: 501875 Module documentation revised Datasheet V 4.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 512595 Error value corrected In case "invalid value", the analog input shows the documented error value Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(130) Version 1.6.0.0: ID: 497325 Modules of revision> = H0 were not backward compatible in mode multisample. Channel description changed:Yes Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(111) Version 1.5.0.0: ID: 475115 Documentation revised. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 485955 Correction - new firmware for hardware version 3 Channel description changed: No Configuration description changed: No Firmwarechanged: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(110) Version 1.4.0.0: ID: 467580 support HW-Variante 3 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(9), 1\7390_3.fw(100) Version 1.3.0.2: ID: 423695 HW file spellcheck Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9) Version 1.3.0.1: ID: 359760 englisch documentation updated Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(9) Version 1.3.0.0: ID: 345275 / Support ID: 400109127 Improved method for prevention of mutual measurement interference by adjacent modules Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 351330 Extensions in function model multisampling Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(9) Version 1.2.5.0: ID: 328534 Incorrect entry of AnalogInput01 resolved Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.3.0: ID: 261660 Changes for AS3.0.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.2.0: ID: 256670 Extensions for AS 3.0.90 Channel descriptionchanged: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7390_2.fw(6) Version 1.2.1.0: ID: 243660/ Support ID: 400054723 Value of the X20AI1744 is oscillating if severalX20AI1744 are plugged side by side Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(6) Version 1.2.0.0: ID: 256630 New functionmodel (multisample) Channel description changed: No Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(5) Version 1.1.0.0: ID: 256635 Extension of the gain-range: 2mV/V bis 256mV/V Channel description changed: No Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7390_2.fw(4) Version 1.0.2.0: ID: 217820 / Support ID: 400032817 Itlast up to 40sec until the ADC is in synchronous mode Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7390_2.fw(3) |
|||||
