General information
Certifications | |
CE | Yes |
UL |
cULus E225616 Power conversion equipment |
KC | Yes |
Motor power
Specified on nameplate, 1-phase |
0.37 kW 0.5 PS |
Specified on nameplate, 3-phase |
0.75 kW 1 PS |
Mains connection
Line-conducted and radiated emissions
Motor connection
Brake chopper
24 VDC power supply
Input voltage | 24 VDC (min. 19 V, max. 30 V) |
Power consumption | 30 W |
Available internal power supplies
Output voltage 24 VDC | 24 VDC (min. 21 V, max. 27 V) |
Output voltage 24 VDC | |
Max. output current at 24 VDC | 200 mA |
Output voltage 10.5 VDC | 10.5 VDC ±5% |
Output voltage 10.5 VDC | |
Max. output current 10.5 VDC | 10 mA |
Safe input - Power removal
Switching threshold | |
Low | <5 V |
High | >15 V |
Electrical isolation | |
Input - ACOPOSinverter | Yes |
Input - Input | No |
Quantity | 1 |
Nominal voltage | 24 VDC |
Response time | ≤100 ms |
Input impedance | 1.5 kΩ |
Input circuit | Sink |
Digital inputs
Analog inputs
Quantity | 2 |
Electrical isolation | |
Input - Input | No |
Input - ACOPOSinverter | Yes |
Input | |
Voltage | ±10 V |
Voltage/Current | 0 to 10 V or 0 to 20 mA |
Resolution | ±11 bits |
Sampling time | <2 ms ±0.5 ms |
Input impedance | |
Voltage | 30 kΩ |
Current | 242 Ω |
Relay outputs
Quantity | 2 |
Nominal voltage | 30 VDC / 250 VAC |
Switching capacity | Max. 2 A for 250 VAC or 30 VDC with resistive load |
Switching capacity | |
Min. | 3 mA for 24 VDC |
Max. | |
With resistive load (cos φ = 1 and L/R = 0 ms) | 2 A for 250 VAC or 30 VDC |
With inductive load (cos φ = 0.4 and L/R = 7 ms) | 1.5 A for 250 VAC or 30 VDC |
Variant | |
Relay 1 | 1 NO contact and 1 NC contact with a common point |
Relay 2 | 1 NO contact |
Response time (max.) | <7 ms ±0.5 ms |
Electrical isolation | |
Output - ACOPOSinverter | Yes |
Output - Output | No |
Analog outputs
Operating conditions
Ambient conditions
Temperature | |
Storage | -25 to 70°C |
Vibration | |
Operation | 3 to 13 Hz: 1.5 mm amplitude / 13 to 200 Hz: 1 g |
Shock | |
Operation | 15 g, 11 ms |
Mechanical properties
Dimensions | |
Width | 130 mm |
Height | 230 mm |
Depth | 175 mm |
Weight | 3 kg |
Référence produit:
8I84T200075.01P-1Description:
ACOPOSinverter P84, 3x 200 to 240 V, 0.75 kW and 1x 200 to 240 V, 0.37 kW, integrated EMC filter and brake chopper, shield plate included in delivery, POWERLINK interface.
Accessoires optionnels
Cable and adapters
8I0XD304.301-1 | RJ45 cable, 1 m, for remote use of the display for the ACOPOSinverter. |
8I0XD304.303-1 | RJ45 cable, 3 m, for remote use of the display for the ACOPOSinverter. |
8I0XD304.305-1 | RJ45 cable, 5 m, for remote use of the display for the ACOPOSinverter. |
8I0XD304.310-1 | RJ45 cable, 10 m, for remote use of the display for the ACOPOSinverter. |
DC bus choke
8I0DC008.300-1 | DC bus choke 8 A, for ACOPOSinverter P84 3x 200 to 240 V, 0.75 kW and 3x 380 to 480 V, 2.2 to 3 kW. |
Fans (spare part)
8I0XF084.020-1 | Fan for ACOPOSinverter 3x 200 to 240 V, 0.37 to 1.5 kW and 3x 380 to 480 V, 0.75 to 2.2 kW. |
Feed-through mounting kits
8I0MF001.300-1 | Feed-through mounting kit, for ACOPOSinverter P84 3x 200 to 240 V, 0.37 to 1.5 kW and 3x 380 to 480 V, 0.75 to 2.2 kW. |
Graphic display terminal
8I0XD301.300-1 | Graphics display for ACOPOSinverter, 240 x 160 pixels, 8 lines, backlight, function keys, navigation key, IP54 protection. |
8I0XD302.300-1 | Installation kit, IP54 protection, for graphic display of the ACOPOSinverter. |
8I0XD303.300-1 | Front cover for installation kit, IP65 protection, for graphic display of the ACOPOSinverter. |
8I0XD305.300-1 | Female to female adapter, RJ45, for graphics display of the ACOPOSinverter. |
Incremental encoder interfaces
8I0AC123.300-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for RS422 signals (TTL), 5 V supply voltage. |
8I0AC123.301-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for RS422 signals (TTL), 15 V supply voltage. |
8I0AC123.302-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for open collector, 12 V supply voltage. |
8I0AC123.303-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for open collector, 15 V supply voltage. |
8I0AC123.304-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for push-pull HTL, 12 V supply voltage. |
8I0AC123.305-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for push-pull HTL, 15 V supply voltage. |
8I0AC123.306-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for push-pull HTL, 24 V supply voltage. |
Optional EMC filters
8I0FT012.300-1 | 12 A EMC filter for ACOPOSinverter P84 (3-phase 200-240 V, 0.37-1.5 kW and 380-480 V, 0.75-2.2 kW). |
Optional braking resistors
8I0BR100.000-1 | Braking resistor ohmic value: 100 Ω continuous braking power: 0.05 kW degree of protection (IP): IP20 |
Optional line chokes
8I0CS045.000-1 | Mains choke 1-phase 45 A, for ACOPOSinverter P84 1x 200 to 240 V, 4 to 5.5 kW. |
8I0CT004.000-1 | Mains choke 3-phase, 4 A, 50/60 for ACOPOSinverter |
Automation Studio HW Upgrades | Version (date) | Téléchargement |
---|---|---|
V3.0 HW Upgrade (8I84xxxxxxx.01P-1) | EXE / 13 MB | |
V4.0 HW Upgrade (8I84xxxxxxx.01P-1) | EXE / 13 MB |
Certifications | Version (date) | Téléchargement |
---|---|---|
E225616 UL Certificate of Compliance ACOPOSinverter | PDF / 83 KB |
Documentation | Version (date) | Téléchargement |
---|---|---|
ACOPOSinverter P84 User´s Manual | PDF / 26 MB |
Généralités | Version (date) | Téléchargement |
---|---|---|
ACPi ParameterTool | Identification pour téléchargement |
M-CAD (modèles mécaniques) | Version (date) | Téléchargement |
---|---|---|
3D file DXF/STEP 8I84_Size2 | ZIP / 3 MB |