DWL@DWL10000810624
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 2.2.0.0 | * | 29/07/2026 | 244 Ko | EXE | AS6_HW_5AP1130.156C-000.exe | |
| Description |
V6.0 HW Upgrade (5AP1130.156C-000) Revision information 5AP1130.156C-000 Version 2.2.0.0: ID: AQAJ-13568 Following changes: - Support for the APC2300/PPC2300 product series starting with AS6.5/AR6.7. - The installation system NSIS used by B&R can allow local attackers toescalate their privileges. CVE-2025-43715, CVSS: 8.1 (High) CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.1.0: ID: 770795 Configuration changes in case that the Panel is used as Panel PC in Terminal mode. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version2.0.0.0: ID: 672960 Extensions Hypervisor from AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.Thisrequires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixed operation of thecurrent and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 672965 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677790 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of aAutomation PC is activ from Automation Runtime version A4.81. In case of a missconfiguration or missing display unit the Panel PC/Automation PC is startingup in the service mode. This behavior can be configured via the configurationof the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.4.0.0: ID: 636490 Preparation to support the Panel PC 2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 575160 Preparation to support the SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.0.0: ID: 426725 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 545590 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.3.0: ID: 509880 Dimensions adapted The Automation Panel is now shown correctly in thesystem designer. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.2: ID: 458960 Correction in the hardware descrption file Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.1: ID: 452385 Graphics was shown deformed in the System Designer of the Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 437605 Support for 5AP1120.0573-000 The display unit for Automation Panel 1000 is supported with Automation Studio V4.0.17.x. The display unit for Panel PC 2100 is supported with Automation Studio V4.1.4.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.1.0.0 | * | 12/02/2025 | 541 Ko | EXE | AS6_HW_5AP1130.156C-000.exe | |
| Description |
V6.0 HW Upgrade (5AP1130.156C-000) Revision information 5AP1130.156C-000 Version 2.1.0.0: ID: AQAJ-8956 Support for the APC3200/PPC3200 product series starting with AS6.3/AR6.3. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.1.0: ID: 770795 Configuration changes in case that the Panel is used as Panel PC in Terminal mode. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 672960 Extensions Hypervisor from AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are usedfor all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 672965 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677790 Module supervision of the Automation Panels from AR A4.81 on theAutomation PC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usageas display unit ofa Automation PC is activ from Automation Runtime version A4.81. In case of a missconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed:Yes Firmware changed: No Version 1.4.0.0: ID: 636490 Preparation to support the Panel PC 2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 569200 Preparation to support the Panel PC3100 and SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.0.0: ID: 426725 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 545590 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an errormessage is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.3.0: ID: 509880 Dimensions adapted The Automation Panel is now shown correctly in the system designer. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.2: ID: 458960 Correction in the hardware descrption file Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 451025 Support for 5AP1120.101E-000 The display unit for Automation Panel 1000 is supported with Automation Studio V4.1.4.x. The display unit for Panel PC 2100 is supported with Automation Studio V4.1.4.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
