Short description
I/O module | 8 digital outputs 12 VDC for 1-wire connections |
General information
Digital outputs
Electrical properties
Electrical isolation | Channel isolated from bus and I/O power supply |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | See section "Derating". |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Note |
Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
Pitch | 12.5+0.2 mm |
Référence produit:
X20DO8232Description:
- 8 digital outputs with 2 A
- Rated voltage 12 VDC
- Source connection
- 1-wire connection
- Power feed integrated in the module
- Integrated output protection
The module is equipped with 8 outputs for 1-wire connections. The nominal output current is 2 A and the nominal voltage is 12 VDC.
The output supply is fed directly to the module. An additional supply module is not needed. There is no connection between the module and the I/O supply potential on the bus module.
Accessoires obligatoires
Automation Studio HW Upgrades | Version (date) | Téléchargement |
---|---|---|
V2.7 HW Upgrade (X20DO8232) | EXE / 1 Mo | |
V2.7 HW Upgrade (X20DO8232) | EXE / 1 Mo | |
V3.0 HW Upgrade (X20DO8232) | EXE / 2 Mo | |
V3.0 HW Upgrade (X20DO8232) | EXE / 2 Mo | |
V4.0 HW Upgrade (X20DO8232) | EXE / 1,022 Ko |
Documentation | Version (date) | Téléchargement |
---|---|---|
Data sheet X20DO8232 | PDF / 387 Ko | |
Installation- / EMC-Guide | PDF / 20 Mo | |
X20 System User´s Manual | PDF / 7 Mo |
E-CAD (modèles Electro ou EPLAN) | Version (date) | Téléchargement |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 Mo |
M-CAD (modèles mécaniques) | Version (date) | Téléchargement |
---|---|---|
3D File DXF/STEP X20 Electronic module | ZIP / 10 Ko | |
3D File STEP X20 I/O-Slice | ZIP / 872 Ko | |
Dimensions PDF X20 Electronic module | PDF / 3 Ko |