Short description
| Bus module | X20 Compact-S PLC base - backplane for Compact-S PLC and Compact-S PLC power supply module and X20 interface module |
| Interfaces | 1x RS232 connection, 1x CAN bus connection |
General information
| B&R ID code | 0xEB07 |
| Power consumption | |
| Bus | 0.94 W |
| Internal I/O | - |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| Certifications | |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| UL |
cULus E115267 Industrial control equipment |
| DNV |
Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| CCS | Yes |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV |
EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
I/O power supply
| Nominal voltage | 24 VDC |
| Permissible contact load | 10 A |
Electrical properties
| Electrical isolation | Bus, CAN bus and RS232 not isolated from each other |
Operating conditions
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | - |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Note | Left and right X20 end cover plates included in delivery |
| Pitch | 62.5+0.2 mm |
物料号:
X20BB67描述:
- Base for X20 Compact-S controllers
- 1 slot for X20 interface modules
- RS232 connection
- CAN bus connection
- Integrated terminating resistor for CAN bus
The bus module is a base for all X20 Compact-S controllers with the designation X20CP048x. It is equipped with 1 slot for X20 interface modules.
The left and right end cover plates are included in delivery.
| Automation Studio硬件升级 | 版本（日期） | 下载 |
|---|---|---|
| V4.3 HW Upgrade (X20BB67) | EXE / 1 MB | |
| V6.0 HW Upgrade (X20BB67) | EXE / 1 MB |
| E-CAD（电子或EPLAN模板） | 版本（日期） | 下载 |
|---|---|---|
| X20 EPLAN P8 from V2.4 | EXE / 160 MB |
| M-CAD（机械模板） | 版本（日期） | 下载 |
|---|---|---|
| 3D File DXF/STEP X20BB6x/81 | ZIP / 1 MB |
| 文档 | 版本（日期） | 下载 |
|---|---|---|
| Data sheet X20BB67 | PDF / 880 KB | |
| X20 System User´s Manual | PDF / 49 MB |