General information
B&R ID code 0x1AC9
Status LED Yes (color / blink code)
24 VDC OUT power supply (DCOK LED) = Yes
Status indicators Operating status and power supply
Diagnostics
Power supply 24 VDC OUT: Yes, using LED and software
24 VDC X2X: Yes, using software
X2X Link Yes, using software
Overload Yes, using software (outputs)
Input capacitance
Module power supply 220 µF
Power consumption Max. 0.75 W
Electrical isolation
Digital outputs - 24 VDC X2X, OUT power supply No
X2X Link - 24 VDC X2X, OUT power supply Yes
X2X Link - Digital outputs Yes
Remote valve terminal connection for 25-pin DSUB multi-pin connection 16 valves
Certifications
CE Yes
UKCA Yes
UL cULus E115267
Industrial control equipment
Circuit
Bus connection 10-pin
GND pin 22, 23, 24, 25
Power supply via bus connector
Interfaces
User interface
Variant 10-pin male multipoint connector
Type X2X Link slave
Digital outputs
Switching voltage 24 VDC ±25%
Total nominal current 1.6 A
Output circuit Source
Output protection Protected against short circuit, overload and overtemperature
Switching delay
0 → 1 Typ. 150 μs / max. 200 μs
1 → 0 Typ. 175 μs / max. 250 μs
Type High-side driver (source)
Max. output current 0.1 A
Max. switching frequency 100 Hz
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation 0 to 55°C
Storage -20 to 70°C
Transport -20 to 70°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block TB710 separately.
Installation 25-pin DSUB, screw mounting, 4-40 UNC
Weight 56 g
Module dimensions including mounting plates 63 x 59 x 20 mm (H x W x D)
Номер модель:
7XV116.50-01
Описание:
Remote valve terminal connection, 16 digital outputs, 0.1 A, 24 VDC, for 25-pin DSUB multipin connector, GND pins 22, 23, 24, 25, X2X Link, electrically isolated, common 24 VDC power supply, order 1x terminal block 0TB710.91 separately!
Обязательные аксессуары
Terminal blocks
0TB710.90 Accessory terminal block, 10-pin, screw clamp terminal block 1.5 mm²
0TB710.91 Accessory terminal block, 10-pin, cage clamp terminal block 1.5 mm²
M-CAD (Механические Шаблоны Версия (Дата) Загрузка
3D data DXF / STEP XV IP20 ZIP / 2 МБ
Документация Версия (Дата) Загрузка
Compact I/O User's Manual PDF / 4 МБ
XV Users's Manual PDF / 4 МБ
Обновление Automation Studio HW Версия (Дата) Загрузка
V4.0 HW Upgrade (7XV116.50-01) EXE / 724 кБ
Сертификаты Версия (Дата) Загрузка
Safe cutoff of potential groups PDF / 211 кБ

Укажите страну и язык

B&R Logo