X20CP0484-1

Short description
Interfaces 1x Ethernet, 1x POWERLINK V2, 2x USB, 1x X2X Link
System module Controller
General information
B&R ID code 0xFA24
Cooling Fanless
Status indicators CPU function, Ethernet, POWERLINK
Diagnostics
CPU function Yes, using LED status indicator
Ethernet Yes, using LED status indicator
POWERLINK Yes, using LED status indicator
Temperature Yes, using software register
Support
Controller redundancy No
Storage health data support Yes
ACOPOS support Yes
Visual Components support Yes
Power consumption 2.97 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
DNV Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
ABS Yes
BV EC33B
Temperature: 5 - 55°C
Vibration: 4 g
EMC: Bridge and open deck
Controller
Real-time clock Retention for at least 300 hours, typ. 1000 hours at 25°C, 1 s resolution, -18 to 28 ppm accuracy at 25°C
FPU Yes
Processor
Type ARM Cortex-A9
Clock frequency 667 MHz
L1 cache
Data code 32 kB
Program code 32 kB
L2 cache 512 kB
Integrated I/O processor Processes I/O data points in the background
Remanent variables 64 kB FRAM, retention >10 years
Shortest task class cycle time 0.4 ms
Typical instruction cycle time 0.0106 µs
Standard memory
RAM 512 MB DDR3 SDRAM
Application memory
Type 2 GB eMMC flash memory
Data retention 10 years
Writable data amount
Guaranteed 40 TB
Results for 5 years 21.9 GB/day
Guaranteed erase/write cycles 20,000
Error-correcting code (ECC) Yes
Slots for interface modules
X20BB5x 0
X20BB6x 1
X20BB7x 2
Interfaces
Interface IF2
Signal Ethernet
Variant 1x RJ45 shielded
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 10/100 Mbit/s
Transfer
Physical layer 10BASE-T/100BASE-TX
Half-duplex Yes
Full-duplex Yes
Autonegotiation Yes
Auto-MDI/MDIX Yes
Interface IF3
Fieldbus POWERLINK V2 managing or controlled node
Type Type 6
Variant 1x RJ45 shielded
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 100 Mbit/s
Transfer
Physical layer 100BASE-TX
Half-duplex Yes
Full-duplex POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation Yes
Auto-MDI/MDIX Yes
Interface IF4
Type USB 1.1/2.0
Variant Type A
Max. output current 0.2 A
Interface IF5
Type USB 1.1/2.0
Variant Type A
Max. output current 0.2 A
Interface IF6
Fieldbus X2X Link master
On base module X20BBx2: Compact-S PLC base module with integrated RS232 interface
X20BBx3: Compact-S PLC base module with integrated RS485 interface
X20BBx7: Compact-S PLC base module with integrated RS232 and CAN bus interface
Electrical properties
Electrical isolation Ethernet (IF2) and POWERLINK (IF3) isolated from each other, from other interfaces and from PLC
X2X (IF6) isolated from other interfaces and PLC: Yes, with X20PS9600 / No, with X20PS9602
USB (IF4, IF5) not isolated from each other and PLC
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating See section "Derating" in the X20PS960x data sheet.
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x power supply module X20PS9600 or X20PS9602 separately.
Order 1x Compact-S PLC base X20BB5x, X20BB6x or X20BB7x separately.
Pitch
X20BB5x 37.5+0.2 mm
X20BB6x 62.5+0.2 mm
X20BB7x 87.5+0.2 mm
Артикул:
X20CP0484-1
Описание:
  • ARM Cortex-A9 processor with 667 MHz and integrated I/O processor
  • POWERLINK with onboard poll-response chaining
  • Onboard Ethernet
  • 2x onboard USB
  • 512 MB DDR3 SDRAM
  • 2 GB onboard flash drive
  • Fanless
  • No battery
  • Extremely compact

The controllers in the X20 Compact-S family are both powerful and compact. The fanless, battery-free design of these controllers means they are completely maintenance-free.

The X20CP0484-1 is equipped with an ARM Cortex-A9-667 processor, 512 MB RAM and 2 GB built-in flash drive. The FRAM for storing remanent variables has 64 kB available.

With POWERLINK, Ethernet, USB and RS232, the controller offers a wide range of communication options. An optional RS485 or CAN interface is available. If the application requires additional interfaces, the controller can be modularly expanded by one or two X20 interface slots. This allows the entire product range of X20 fieldbus interfaces to be used.

Необходимые аксессуары
System modules for Compact-S PLCs
X20BB52 Базовый модуль X20 для Compact-S CPU, для контроллера Compact-S CPU и модуля питания Compact-S CPU, база для встроенного интерфейса RS232, подключение X20, заглушки X20 (левая и правая) X20AC0SL1/X20AC0SR1 включены в поставку
X20BB53 X20 Compact-S bus base, for Compact-S PLC and Compact-S PLC power supply module, base for integrated RS485 interface, X20 connection, X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included
X20BB57 Базовый модуль X20 для Compact-S CPU, для контроллера Compact-S CPU и модуля питания Compact-S CPU, база для встроенных интерфейсов шины CAN и RS232, подключение X20, заглушки X20 (левая и правая) X20AC0SL1/X20AC0SR1 включены в поставку
X20BB62 Базовый модуль X20 для Compact-S CPU, для контроллера Compact-S CPU и модуля питания Compact-S CPU, база для встроенного интерфейса RS232, слот для интерфейсного модуля X20, подключение X20, заглушки X20 (левая и правая) X20AC0SL1/X20AC0SR1 включены в поставку
X20BB63 X20 Compact-S bus base, for Compact-S PLC and Compact-S PLC power supply module, base for integrated RS485 interface, slot for X20 interface module, X20 connection, X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included
X20BB67 Базовый модуль X20 для Compact-S CPU, для контроллера Compact-S CPU и модуля питания Compact-S CPU, база для встроенных интерфейсов шины CAN и RS232, слот для интерфейсного модуля X20, подключение X20, заглушки X20 (левая и правая) X20AC0SL1/X20AC0SR1 включены в поставку
X20BB72 Базовый модуль X20 для Compact-S CPU, для контроллера Compact-S CPU и модуля питания Compact-S CPU, база для встроенного интерфейса RS232, 2 слота для интерфейсных модулей X20, подключение X20, заглушки X20 (левая и правая) X20AC0SL1/X20AC0SR1 включены в поставку
X20BB77 Базовый модуль X20 для Compact-S CPU, для контроллера Compact-S CPU и модуля питания Compact-S CPU, база для встроенных интерфейсов шины CAN и RS232, 2 слота для интерфейсных модулей X20, подключение X20, заглушки X20 (левая и правая) X20AC0SL1/X20AC0SR1 включены в поставку
X20PS9600 Модуль питания X20, для контроллеров Compact-S CPU и внутренней шины ввода/вывода, питание шины X2X
X20PS9602 Модуль питания X20, для контроллеров Compact-S CPU и внутренней шины ввода/вывода, питание шины X2X, источник питания без гальванической развязки
Terminal blocks
X20TB12 Клеммная колодка X20, 12 контактов, кодировка 24 В постоянного тока
E-CAD (шаблоны Electro или EPLAN) Version (Date) Download
Makro-/Artikeldaten 4.0.1 (X20CP0484-1) EXE / 634 KB
X20 EPLAN P8 from V2.4 EXE / 158 MB
M-CAD (Механические шаблоны) Version (Date) Download
3D File DXF/STEP X20CP048x ZIP / 2 MB
Документация Version (Date) Download
Data sheet X20(c)CP04xx PDF / 2 MB
Installation- / EMC-Guide PDF / 20 MB
X20 System User´s Manual PDF / 7 MB
Обновление Automation Studio HW Version (Date) Download
V4.5 HW Upgrade (X20CP0484-1) EXE / 2 MB
Сертификаты Version (Date) Download
BV Type Approval Certificate - X20 PDF / 556 KB
DNV Type Approval Certificate - X20 PDF / 193 KB
Lloyds Register PDF / 502 KB

Выберите регион и язык:

B&R Logo