5LS189.6-1

Short description

Communication module	1x X2X Link master, 1x POWERLINK (V1/V2) managing or controlled node

General information

B&R ID code	0x7670
Ready relay	Normally open contact and normally closed contact, max. 30 VDC, max. 10 A
Status indicators	Status of the POWERLINK station, network activity, link/collision for IF2
Diagnostics
Bus function (IF2)	Yes, using LED status indicator and software
Data transfer (IF1)	Yes, using software
Station status (IF2)	Yes, using LED status indicator and software
Power consumption	4 W
Electrical isolation
IF1 - IF2	Yes
PC - IFx	Yes
Certifications
CE	Yes
UL	cULus E115267 Industrial control equipment
EAC	Product family certification

Controller

SRAM	1 MB, battery-backed

Interfaces

Interface IF1
Fieldbus	X2X Link master
Variant	4-pin male multipoint connector
Distance between 2 stations	Max. 100 m
Interface IF2
Fieldbus	POWERLINK (V1/V2) managing or controlled node
Type	Type 3
Variant	1x shielded RJ45 port
Line length	Max. 100 m between 2 stations (segment length)
Transfer rate	100 Mbit/s
Transfer
Physical layer	100BASE-T
Half-duplex	Yes
Full-duplex	POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation	Yes
Auto-MDI/MDIX	Yes

Operating conditions

Degree of protection per EN 60529	IP20 in installed state

Ambient conditions

Temperature
Operation	0 to 55°C
Storage	-25 to 70°C
Transport	-25 to 70°C
Relative humidity
Operation	0 to 95%, non-condensing
Storage	0 to 95%, non-condensing
Transport	0 to 95%, non-condensing

Mechanical properties

Note	Order 2x TB704 terminal blocks separately Lithium battery included in content of delivery
Slot	Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC	Yes
B&R Panel PC	Yes
Desktop PC	Yes

Номер модель:

5LS189.6-1

Описание:

POWERLINK (V1/V2) for real-time Ethernet communication
X2X Link

Logic scanner module 5LS189.6-1 is a PCI half-size module. It supports plug-and-play and is equipped with 1 MB SRAM for remanent data (process variables and data objects). Memory available for remanent process variables depends on the CPU, Automation Runtime, etc.

5LS189.6-1 is a POWERLINK logic scanner module that can be used as a manager or bus controller module. It is connected via an RJ45 port.

In addition, the module is equipped with an X2X Link interface and a ready relay.

Включено в комплект поставки

Batteries

4A0006.00-000	Литиевая батарея, 3 В / 950 мА·ч, кнопочная

Обязательные аксессуары

Terminal blocks

0TB704.9	Принадлежность, 4-контактная клеммная колодка с винтовыми зажимами 2,5 мм²
0TB704.91	Принадлежность клеммная колодка, 4-контактная, нажимная клеммная колодка 2,5 мм²

Дополнительные аксессуары

Batteries

0AC201.91	Литиевые батареи, 4 шт., 3 В / 950 мА·ч, кнопочные

E-CAD (Electro или EPLAN шаблоны)	Версия (Дата)	Загрузка
APC EPLAN P8 from V2.4		EXE / 99 MB Авторизироваться для загрузки

Документация	Версия (Дата)	Загрузка
Data sheet 5LS189.6-1		PDF / 3 MB Авторизироваться для загрузки

Обновление Automation Studio HW	Версия (Дата)	Загрузка
V2.7 HW Upgrade (5LS189.6-1)		EXE / 630 KB Авторизироваться для загрузки
V3.0 HW Upgrade (5LS189.6-1)		EXE / 630 KB Авторизироваться для загрузки
V4.0 HW Upgrade (5LS189.6-1)		EXE / 749 KB Авторизироваться для загрузки