X20PS2110

Short description
Power supply module 24 VDC power supply module for internal I/O power supply
General information
B&R ID code 0x2016
Status indicators Operating state, module status
Diagnostics
Module run/error Yes, using LED status indicator and software
Power consumption
Bus 0.2 W
Internal I/O 0.82 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UKCA Yes
CRA (Cyber Resilience Act) In preparation
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
KC Yes
Input I/O power supply
Input voltage 24 VDC -15% / +20%
Input current Max. 6 A
Fuse Integrated 6.3 A, slow-blow, can be replaced
Reverse polarity protection No
Output I/O power supply
Nominal output voltage 24 VDC
Behavior on short circuit Integrated fuse
Permissible contact load 6 A
Electrical properties
Electrical isolation I/O supply not isolated from I/O power supply
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x power supply bus module X20BM01 separately
Pitch 12.5+0.2 mm
Número de material:
X20PS2110
Descripción:
  • 24 VDC supply module for internal I/O supply
  • Fuse for I/O power supply integrated in module

The power supply module is used for the internal I/O power supply. The module has an integrated replaceable fuse for the I/O power supply.

Accesorios obligatorios
Bus modules
X20BM01 X20 power supply bus module, 24 VDC keyed, internal I/O power supply interrupted to the left
X20BM05 X20 power supply bus module, with node number switch, 24 VDC keyed, internal I/O power supply interrupted to the left
Terminal blocks
X20TB12 X20 terminal block, 12-pin, 24 VDC keyed
Actualizaciones de hardware de Automation Studio Versión (fecha) Descargar
V2.7 HW Upgrade (X20PS2110) EXE / 1,016 KB
V3.0 HW Upgrade (X20PS2110) EXE / 1 MB
V4.0 HW Upgrade (X20PS2110) EXE / 644 KB
Certificados Versión (fecha) Descargar
2226379 CSA Certificate of Compliance X20 X67 PDF / 366 KB
E115267 UL Certificate of Compliance X20 PDF / 2 MB
EU Data Act - X20 IO - Connected Product Information Notice PDF / 92 KB
EU Declaration ATEX X20 PDF / 218 KB
EU Declaration of conformity PLC X20 PDF / 169 KB
FTZU 09 ATEX 0083X PDF / 771 KB
Safe cutoff of potential groups PDF / 211 KB
UK Declaration PLC X20 PDF / 151 KB
X20, X67 KC certificates PDF / 6 MB
Documentación Versión (fecha) Descargar
Data sheet X20PS2110 PDF / 817 KB
X20 Package leaflet ATEX/CSA PDF / 2 MB
X20 System User´s Manual PDF / 49 MB
E-CAD (plantillas Electro o EPLAN) Versión (fecha) Descargar
X20 EPLAN P8 from V2.4 EXE / 160 MB
M-CAD (plantillas mecánicas) Versión (fecha) Descargar
3D File DXF/STEP X20 Electronic module ZIP / 10 KB
3D File STEP X20 I/O-Slice ZIP / 872 KB
Dimensions PDF X20 Electronic module PDF / 3 KB

Seleccione país e idioma

B&R Logo